Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

10 questions · 17 marks

Pick again
Print
1Multiple choice1 markEmbedded Systems Swap Remove

Modern cars contain many embedded systems.

Identify what the embedded system that controls the cruise control does.

[1 mark]
  • AIt controls the interior lights
  • BIt displays a map for the driver
  • CIt keeps the car at a constant speed
  • DIt sounds an alarm if the car is broken into
Mark scheme
  • C It keeps the car at a constant speed (1)
  • The only correct answer is C. The correct answer is it keeps the car at a constant speed.
  • A is not correct because controlling the interior lights is done by a different embedded system in the car
  • B is not correct because displaying a map for the driver is done by the satellite navigation system
  • D is not correct because sounding an alarm is done by a different embedded system in the car
Example answers and how they were marked
Full marks1/1

C It keeps the car at a constant speed

Why: Correct option: this is the function of the embedded system that controls the cruise control (1).

No marks0/1

B It displays a map for the driver

Why: Near miss: displaying a map is the function of the satellite navigation system, which the mark scheme says is not correct, so no mark.

No marks0/1

A It controls the interior lights

Why: Misconception: the interior lights are controlled by a different embedded system, so no mark.

2Multiple choice1 markSecondary Memory Swap Remove

A computer has both primary and secondary storage.

Identify the role of secondary storage.

[1 mark]
  • ATo store data and programs permanently
  • BTo store data and instructions currently in use
  • CTo carry out calculations on data
  • DTo allow the CPU to access programs directly
Mark scheme
  • A To store data and programs permanently (1)
  • The only correct answer is A. The correct answer is to store data and programs permanently.
  • B is not correct because storing the data and instructions currently in use is the role of primary storage/RAM, which is volatile, not the role of secondary storage
  • C is not correct because calculations on data are carried out by the CPU, not by secondary storage
  • D is not correct because secondary storage is not directly accessible by the CPU; data must first be copied into RAM
Example answers and how they were marked
Full marks1/1

A To store data and programs permanently

Why: Correct option (1): storing data and programs permanently is the role of secondary storage, which is non-volatile.

No marks0/1

B To store data and instructions currently in use

Why: Near miss scoring 0: this describes primary storage/RAM, which is volatile, and is not the role of secondary storage (line B of the mark scheme). Only A is credited.

No marks0/1

D To allow the CPU to access programs directly

Why: Misconception scoring 0: candidates think the CPU reads programs straight from secondary storage, but secondary storage is not directly accessible by the CPU (line D).

3Multiple choice1 markSecondary Memory Swap Remove

A computer stores files on a hard disk drive.

A computer stores files on a hard disk drive.

Identify what the drive uses to read and write data.

[1 mark]
  • AA drive head that moves over the spinning platters
  • BA laser that measures reflected light
  • CA memory chip that traps electric charges
  • DA pit and land pattern burnt onto the surface
Mark scheme
  • A A drive head that moves over the spinning platters (1)
  • The only correct answer is A. The correct answer is a drive head.
  • B is not correct because a laser that measures reflected light is used by optical media such as a CD or Blu-ray Disc
  • C is not correct because trapping electric charges is how solid state (flash) storage stores data
  • D is not correct because pits and lands are burnt or pressed onto optical media, not onto a hard disk drive
Example answers and how they were marked
Full marks1/1

A A drive head that moves over the spinning platters

Why: Correct option (1): a hard disk drive uses a drive head that moves over the spinning platters to read and write data.

No marks0/1

D A pit and land pattern burnt onto the surface

Why: Near miss scoring 0: pits and lands are an optical feature, as line D of the mark scheme says. Only A is credited.

No marks0/1

C A memory chip that traps electric charges

Why: Misconception scoring 0: this confuses a hard disk drive with solid state storage, which stores data as trapped electric charges (line C).

4Short recall2 marksEmbedded Systems Swap Remove

A digital camera contains an embedded system.

Give two functions that the embedded system performs in the digital camera.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Focus the lens/autofocus (1)
  • Control the shutter (speed) (1)
  • Control the flash/decide when the flash is needed (1)
  • Measure the light level to set the exposure/the aperture (1)
  • Stabilise the lens/image stabilisation (1)
  • Zoom the lens in and out (1)
  • Detect a face/smile (1)

Do not accept 'take a photograph'/'take a picture'/'capture an image', as taking photographs is the function of the camera, which is given in the question.

Do not accept 'press the button' as this is an action of the user, not a function performed by the embedded system.

Do not accept vague answers such as 'use the camera', 'turn the camera on and off' or 'make the camera work', which do not name a function that the embedded system performs.

Example answers and how they were marked
Full marks2/2

It focuses the lens and decides when the flash should fire.

Why: Focus the lens (1) and control the flash (1).

Some marks1/2

It controls the zoom and takes a picture when the button is pressed.

Why: Zoom the lens credited (1); 'takes a picture' is not accepted because taking photographs is the function of the camera, which is given in the question, and 'press the button' is the user's action, not a function of the embedded system.

No marks0/2

It takes a picture when the button is pressed and it makes the camera work.

Why: No mark: 'takes a picture' repeats the camera's function given in the question, 'press the button' is an action of the user, and 'makes the camera work' is too vague to name a function.

5Short recall2 marksSecondary Memory Swap Remove

A computer uses secondary storage to keep programs and data.

Give two examples of secondary storage devices that store data using magnetic media.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Hard disk drive/HDD (1)
  • External/portable hard disk drive (1)
  • Magnetic tape drive (1)
  • Magnetic tape (1)

Allow a named device or the storage media type, e.g. hard disk/hard disc for hard disk drive, tape for magnetic tape

Allow floppy disk/floppy disk drive

Do not accept solid state devices (SSD, USB flash drive/memory stick, SD card/memory card) or optical media (CD/DVD/Blu-ray) as these do not store data using magnetism

Example answers and how they were marked
Full marks2/2

Hard disk drive and magnetic tape

Why: Hard disk drive (1) and magnetic tape (1) are both magnetic secondary storage, so both marks are awarded.

Some marks1/2

Hard disk drive and SD card

Why: Hard disk drive is magnetic (1); an SD card is solid state, not magnetic, so the second mark is not awarded.

No marks0/2

CD and DVD

Why: Both are optical media, which the mark scheme says not to accept, so no marks are awarded.

6Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

7Describe2 marksPrimary Memory Swap Remove

A computer has both primary memory (RAM) and secondary storage.

Describe why the instructions and data of a program are copied from secondary storage into RAM.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • RAM can be read from/written to much faster than secondary storage (1) so the CPU can fetch the instructions and data quickly enough to keep working/does not idle (1)
  • The CPU can fetch/execute instructions faster than they can be read from secondary storage (1) so instructions and data are copied into RAM to avoid the CPU waiting/idling (1)
  • RAM is connected to the CPU by the address/data/control buses (1) so the CPU can fetch instructions and data directly from main memory during the fetch-decode-execute cycle (1)

For each linked description, the first mark is for the point and the second mark is for a valid development linked to it. A point with no development scores 0. A development that only repeats the point (for example, 'so data can be accessed faster') does not earn the second mark, but the point can still earn one mark.

Do not accept responses that only restate the question, such as 'so the program is copied into RAM'.

Do not accept responses about RAM being volatile, being permanent/non-volatile storage or having a large capacity.

Do not award for a response that only says the CPU cannot run instructions directly from secondary storage, or that the CPU can only directly access main memory, unless it is linked to why this means RAM gives faster access (for example, so the CPU does not wait).

Example answers and how they were marked
Full marks2/2

RAM can be read from and written to much faster than secondary storage, so the CPU can fetch the instructions and data quickly enough to keep working without idling.

Why: Linked point (1) for RAM being faster than secondary storage, and linked development (1) for the CPU fetching instructions/data quickly enough to keep working/not idle.

Some marks1/2

RAM can be accessed faster than a hard disk drive, so the data can be accessed faster.

Why: Correct point (1) that RAM is faster than secondary storage, but the development only repeats that access is faster and does not say how this helps the CPU, so no second mark.

No marks0/2

The instructions are copied into RAM so that they are stored permanently after the computer is switched off.

Why: Says RAM stores data permanently, which is wrong; this is the role of secondary storage and is covered by the 'Do not accept' line, so no mark.

8Describe2 marksSecondary Memory Swap Remove

A laptop uses a solid state drive (SSD) for secondary storage.

Describe how data is stored on a solid state drive.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
  • A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
  • Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
  • The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Example answers and how they were marked
Full marks2/2

A current is used to force electrons through a barrier so that they become trapped, and a cell with a trapped charge or a cell with no trapped charge represents a 1 or a 0.

Why: Linked description: a current forces electrons through a barrier (1) and trapped/not trapped charge represents 1s and 0s (1).

Some marks1/2

The data is stored in flash memory chips.

Why: Gives the creditworthy point that data is stored on flash memory chips (1) but does not develop it, e.g. by saying the data is held as electrical charges or by describing trapped electrons.

No marks0/2

The data is stored as magnetised areas on a spinning platter.

Why: This describes magnetic storage, which the mark scheme says not to accept for a solid state drive.

9Explain2 marksEmbedded Systems Swap Remove

An engine control unit (ECU) in a car is an embedded system.

Explain one benefit of using an embedded system for the engine control unit instead of a general purpose computer.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
  • (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
  • (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
  • (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
  • (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Example answers and how they were marked
Full marks2/2

It is more reliable than a general purpose computer (1) because it only runs the one program so it will not crash and stop the engine working (1).

Why: Benefit stated (1) with a linked reason (1); the reason shows why only running one program makes it reliable.

Some marks1/2

It is more reliable (1) because it is part of the car's engine (1).

Why: Only the benefit earns a mark (1); being part of the car is a location, not a linked reason why it is reliable.

No marks0/2

It is faster than a general purpose computer (0) because it is embedded in the engine (0).

Why: Misconception that an embedded system is faster; embedded systems have limited processing resources, so neither point nor reason is creditworthy.

10Explain2 marksPrimary Memory Swap Remove

RAM is used to store data while a computer is running.

Explain one reason why the data in RAM is lost when a computer is switched off.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • RAM is volatile (memory) (1) because it needs a constant/continuous power supply to hold/store the data it contains (1)
  • Data is held in RAM as electrical states/charges (1) so when the power supply is removed these states cannot be kept/refreshed and the data is lost (1)
  • RAM is used as short-term storage for the data and instructions currently in use (1) because it can only hold them while the computer has power (1)

For both marks, the expansion must follow/associate with the statement and must link the loss of the data to the power supply being removed.

Accept 'RAM is volatile' on its own for the first mark; the second mark is only awarded for a linked reason about the power supply.

Do not accept 'RAM is temporary/short-term memory' or 'RAM is cleared when the computer is switched off' on its own for both marks, as neither gives a reason.

Do not accept answers that say the data is deleted/cleared/erased by the computer or the operating system, or that the data is saved/moved to secondary storage, without saying why the data cannot be kept (e.g. because RAM needs power/is volatile).

Example answers and how they were marked
Full marks2/2

RAM is volatile memory, which means it needs a constant power supply to keep the data it is holding. When the power is switched off, the data is lost.

Why: Linked point (1) for 'RAM is volatile memory' and reason (1) for needing a constant power supply to hold the data.

Some marks1/2

The data in RAM is lost because RAM is volatile memory.

Why: Point (1) for 'RAM is volatile' but no linked reason about the power supply, and the mark scheme states that 'RAM is volatile' alone earns only the first mark.

No marks0/2

The data is deleted from RAM by the operating system when the computer is shut down so that the memory is free for next time.

Why: No creditworthy point: the answer says the data is deleted without saying why it cannot be kept, which the mark scheme's 'Do not accept' line rules out.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.