Character Sets Exam Questions

• B 7 (1)
• The only correct answer is B. The correct answer is 7 bits.
• A is not correct because 6 bits give only 64 different characters
• C is not correct because 8 bits are used by extended ASCII to give 256 characters
• D is not correct because 16 bits give 65 536 different characters, which is far more than the 128 in ASCII

• C 128 (1)
• The only correct answer is C. The correct answer is 128.
• A is not correct because 6 bits give only 64 different combinations
• B is not correct because 127 is the largest 7-bit value, not the number of characters that 7 bits can represent
• D is not correct because 256 characters need 8 bits, as used by 8-bit extended ASCII

• B 7 (1)
• The only correct answer is B. The correct answer is 7.
• A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
• C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
• D is not correct because 70 is the number of characters needed, not a number of bits

• A 32 (1)
• The only correct answer is A. The correct answer is 32.
• B is not correct because 33 is the ASCII code for the exclamation mark (!)
• C is not correct because 48 is the ASCII code for the character 0
• D is not correct because 65 is the ASCII code for the uppercase letter A

Award one mark for:

• 64 (1)
• 2^6 (1)
• 2 × 2 × 2 × 2 × 2 × 2 (1)

Allow 64 characters / sixty-four.

Allow 2 to the power of 6 for 2^6.

Do not accept 128, which is the number of characters that can be represented using 7 bits.

Do not accept 63, the largest value that can be represented using 6 bits, rather than the number of different characters.

Do not accept 12 (2 × 6), ie the number of bits multiplied by 2.

Award one mark for:

• 11 (characters) (1)

Allow 11 remainder 3.

Allow 80 ÷ 7 = 11.428... rounded down to 11.

Do not accept 11.4 or 12 (rounding up or giving a decimal answer).

Do not award an unevaluated calculation such as 80 ÷ 7 with no answer.

Award one mark for any of the following up to a maximum of two marks:

• (Only) 128 different characters can be represented / 7 bits give 2^7 = 128 different codes (1)
• It cannot represent characters from languages other than English / non-English alphabets, e.g. Greek, Chinese (1)
• It cannot represent accented characters, e.g. é, ñ (1)
• It cannot represent symbols or emoji that are not in the ASCII character set (1)

Award a maximum of one mark for the last three bullets, as they are all examples of characters that fall outside the 128 ASCII codes.

Allow 'it can only represent 128 characters, so some characters are missing' for the first bullet.

Do not accept 'it uses 7 bits' / 'it only uses 7 bits' on its own, without saying what this limits.

Do not accept 'it can only store a limited amount of text' / 'it can only store short messages', as 7 bits limits the number of characters available, not the length of a message.

Do not accept 'it can only represent the characters in the ASCII character set', as this repeats the question.

Do not accept 'it is old/out of date' or 'it cannot store numbers'.

Award one mark for any of the following up to a maximum of two marks:

• A set/collection of characters (1)
• (Characters such as) letters, digits and symbols/punctuation (1)
• Each character is represented by a unique code/binary value (1)
• A standard set of characters so that text can be exchanged between computer systems (1)

Allow 'a list of characters that a computer can represent' for the first mark.

Do not accept a program/software that converts text into binary.

Do not accept 'a set of binary codes' on its own.

Award up to two marks for a linked description such as:

• The denary code 77 is converted to binary (1) to give the 7-bit pattern 1001101 (1)
• The character M is represented by a unique ASCII code/number (1) that is stored as a 7-bit binary pattern (1)
• 7 bits are used to store the code for M (1) so 128 different characters can be represented (1)
• The binary pattern 1001101 is stored in memory (1) using one 7-bit code for each character (1)

Do not accept answers that only state the ASCII code 77, as this is given in the question.

Do not accept 01001101, as this is an 8-bit pattern.

Do not accept ASCII described as a programming language or a method of encryption.

Award up to two marks for a linked description such as:

• 6 bits give only 64 different codes (1) which is fewer than the number of letters, digits and symbols that must be represented (1)
• 7 bits give 128 different codes (1) which is enough to represent every letter, digit and symbol that is needed (1)
• Adding a bit doubles the number of different codes from 64 to 128 (1) so that every character needed can have its own code (1)
• There are more than 64 characters that must be represented (letters, digits and symbols) (1) so 6 bits cannot give each one a different code (1)

A statement of the number of codes without a development can earn one mark only; the development must be linked to the statement for the second mark.

Do not accept responses that only say computers use binary (1s and 0s).

Do not accept that 7 bits are needed because 7 is a bigger number than 6, with no reference to the number of codes or characters.

Do not accept responses about 8 bits, extended ASCII or Unicode.

Award up to two marks for a linked description such as:

• 7-bit ASCII has only 128 different codes (1) so characters from languages such as Chinese cannot be stored (1)
• 7 bits give 2^7 = 128 possible binary codes (1) so there are not enough codes to give every character in the world's languages its own code (1)
• Only the 128 characters in the ASCII set can be stored (1) so a character outside the set, such as é or 中, cannot be represented (1)

The stated limit on its own (that ASCII can represent only 128 characters) earns 1 mark; the second mark is for linking it to characters from other languages not being storable.

Do not accept 'ASCII can only store English letters/characters' unless it refers to the 128 codes or the 7 bits.

Do not accept a statement that ASCII is 'limited' or 'old' with no link to the number of bits/codes.

Do not accept a recommendation to use Unicode instead, or that ASCII cannot store accented letters, without saying that the 7 bits/128 codes cause the limitation.

Do not accept responses that describe ASCII as a programming language.

Award up to two marks for a linked description such as:

• The codes run in alphabetical order/consecutively (1) so each letter has a code one more than the letter before it (1)
• A has the code 65 and Z has the code 90 (1) so the codes for the letters in between increase by 1 each time (1)
• The letters are stored in sequence (1) so B is A + 1, C is B + 1 and so on (1)

Accept the codes given in denary (65, 90) or as 7-bit binary (1000001, 1011010).

Do not accept 'the codes go up' or 'the codes are in order' on its own, as neither gives the step of 1 or links one letter to the next.

Do not accept 'each uppercase letter has a different code' on its own, as this does not describe the arrangement.

Award up to two marks for a linked explanation such as:

• 7 bits give 128 different codes/combinations (1) which is enough to represent all the characters on a keyboard (1)
• 7 bits allow 128 unique characters (1) so uppercase and lowercase letters, digits and punctuation can all be represented (1)
• 6 bits give only 64 combinations (1) which is not enough for the number of characters on a keyboard (1)
• A keyboard needs to represent more than 64 different characters (1) so 7 bits are needed to give the 128 combinations required (1)
• A fixed number of 7 bits gives 128 possible codes (1) which is enough for the characters ASCII represents, so more bits are not needed (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'because ASCII is 7-bit' or 'because 7 bits is enough' as these repeat the question without giving the number of combinations or saying what they allow.

Do not accept '7 bits give 256 characters'; 256 combinations come from 8 bits (extended ASCII).

Allow 'ASCII has 128 characters/codes' for the 128 point.

Award up to two marks for a linked explanation such as:

• The computer looks up the character in the ASCII character set/table (1) to find the code that represents it (1)
• Each character has its own unique ASCII code (1) so the letter A is converted to and stored as a 7-bit binary pattern (1)
• ASCII uses 7 bits for each character (1) so A is stored as its ASCII code 1000001 (binary) / 65 (denary) (1)

The second mark requires a linked expansion, so a point on its own (e.g. 'A has the code 65') can only earn one mark.

For both marks, the expansion must follow/associate with the statement.

Accept an 8-bit pattern with a leading 0 (e.g. 01000001) as the binary code for A.

Do not accept 'the character is stored as text' without saying it is changed into a code/binary.

Do not accept a binary value on its own (e.g. 1000001) without saying that it is the ASCII code/that the character is converted to it.

Award up to two marks for a linked explanation such as:

• Only 16 different characters can be represented (1) so there are not enough characters codes for every letter of the alphabet (1)
• 4 bits give only 16 different combinations (1) which is not enough for the uppercase letters, lowercase letters, digits and symbols on a keyboard (1)
• More than 16 characters are needed on a keyboard (1) so some letters, digits or symbols cannot be represented (1)
• The number of character codes available is limited to 16 (1) because 4 bits give 2 to the power of 4 combinations (1)

For both marks, the expansion must follow/associate with the statement.

Calculating that 4 bits give 2 to the power of 4 = 16 combinations can earn either the point or the linked reason, provided the other half of the answer says what this means (too few characters/codes).

Allow an expansion that names only the letters of the alphabet, e.g. there are not enough character codes for the 26 letters (1).

Do not accept '4 bits can only store 4 characters' (the number of bits is not the number of characters).

Do not accept 'it can only store 16 bits' (16 is the number of character codes/combinations, not the number of bits).

Do not accept 'not enough memory/storage' (the limitation is the number of character codes, not the amount of storage).

Do not accept 'it is limited/smaller' without saying how many characters/codes are available or what cannot be represented.

Award up to two marks for a linked explanation such as:

• The computer needs to tell/distinguish the uppercase A from the lowercase a (1) because each different character has its own unique 7-bit code/pattern (1)
• A and a are different characters (1) so each needs a different 7-bit pattern to be stored and displayed correctly (1)
• If A and a had the same 7-bit pattern (1) the computer could not tell which character to display (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'because they are different letters/cases' without saying they need different/unique codes or that the computer must tell them apart.

Do not accept 'because A is a capital letter' on its own.

Do not accept 'because the codes are different numbers' or '65 is not 97' without linking to the need to tell the characters apart or to unique codes.

Indicative content

How characters are mapped to codes

• Each character in a book title or author name is given a unique 7-bit binary code from the ASCII character set.
• The letter A, for example, is stored as the code 1000001 and the letter B as 1000010, so the catalogue can store letters as binary.
• Uppercase letters, lowercase letters, digits, punctuation and the space character each have their own ASCII code.
• The same character always uses the same code, so the text can be stored and read back correctly by the library system.

Why 7 bits are used for each character

• Seven bits give 2 to the power of 7, which is 128 different bit patterns, and this is enough to represent the letters, digits and punctuation needed in the catalogue.
• A standard keyboard has around 98 characters, so 6 bits would give only 64 codes and would not be enough.
• Using a fixed 7 bits per character means every character takes the same amount of storage, which makes the catalogue file simple to process.

Benefits of using ASCII for the catalogue

• ASCII is a standard character set, so the catalogue data can be exchanged between different computers and software.
• Author names and titles entered on one system will display correctly on another system that uses ASCII.
• ASCII uses only 7 bits per character, so the catalogue takes less storage than a character set that uses more bits.
• It is simple to encode and decode because each character has a single fixed code.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Do not accept 8 bits or 256 characters as features of 7-bit ASCII; these are extended ASCII.

Indicative content

The number of characters that 7-bit ASCII can represent

• Seven-bit ASCII gives 2 to the power of 7, which is 128 different codes, so it can represent a maximum of 128 different characters.
• This is enough for the English alphabet, digits and common punctuation, but it is a fixed and limited set.
• The website may need more than 128 characters once customer names from different countries are included.

Characters that cannot be represented

• Accented letters such as é do not have a 7-bit ASCII code, so they cannot be stored correctly.
• Characters from any alphabet other than the Latin one, such as Greek or Cyrillic letters, cannot be represented in 7-bit ASCII.
• If a customer enters a character that is not in the character set, the website may store the wrong character or show a replacement symbol.
• The company may have to misspell or simplify a customer's name because the required character cannot be stored.

The effect of using more bits for each character

• Each extra bit doubles the number of available codes, so for n bits there are 2 to the power of n codes; 8 bits give 256 codes and 16 bits give 65 536 codes.
• Using more bits allows a larger character set to represent accented letters and other alphabets.
• More bits per character means each character takes more storage, so the website's text files and pages are larger.
• Larger pages take longer to transmit over the internet to a customer.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both the limit of 128 codes and at least one type of character that cannot be represented; a point about using more bits on its own is not sufficient for Level 3, and not every bullet needs to be covered for Level 3.

Do not accept the idea that 7-bit ASCII can represent all characters, that extended or 8-bit ASCII can represent every character in every alphabet, or that accented letters are stored as plain letters without the accent.