Edexcel GCSE Computer Science (1CP2) Exam Questions

• B The destination IP address (1)
• The only correct answer is B. The correct answer is the destination IP address.
• A is not correct because a domain name is converted to an IP address by a DNS server before routing begins
• C is not correct because the sender's MAC address is only used to deliver the packet on the local network
• D is not correct because the file name is not used to route packets

Award one mark for:

• 0 to 255 (1)

Allow 0–255 / 0-255 / between 0 and 255 / 0 and 255.

Do not accept 1 to 255 (0 is a valid value).

Do not accept any range that includes 256, e.g. 0 to 256.

Award one mark for any of the following up to a maximum of two marks:

• A network that covers a small geographical area / is on a single site / is within one building (1)
• (Two or more) computers/devices connected together (1)
• So that the connected devices can share data/files/resources such as printers or an internet connection (1)
• Uses cabling/infrastructure owned by the organisation (1)

Do not accept a network that covers a large geographical area / connects networks in different countries, as this describes a WAN.

Do not accept 'a network in a school' on its own, as this repeats the stem without a LAN feature such as a single site or connected devices.

Do not accept 'a network that connects to the internet' without a LAN feature such as a single site or connected devices.

Do not accept 'owned by one organisation' on its own, as a WAN can also be owned by one organisation.

Do not accept 'local' on its own without saying what it means.

The share mark needs the sharing to be linked to the connected devices/network, e.g. 'share files' or 'share printers'.

Award up to two marks for a linked description such as:

• Protocols are rules/standards for communication (1) so that devices can exchange data (1)
• Devices must use the same protocol (1) so that they can understand the format/order of the data (1)
• Protocols set how data is sent and received (1) so that the receiving device can interpret it correctly (1)

Do not accept a bare definition such as 'a protocol is a set of rules' without a link to communication/exchanging data.

Do not accept answers that only name a protocol (e.g. TCP/IP, HTTP) without describing why protocols are needed.

Do not accept responses that describe hardware such as routers or cables as protocols.

For both marks, the development must explain why the rules/standard are needed.

Do not award two marks for two statements that make the same point.

Award up to two marks for a linked description such as:

• (Ethernet) cables are not affected by interference from other devices (1) so data is transferred at a consistent/steady speed (1)
• Each device has its own cable to the switch (1) so the full bandwidth is available to that device and speeds do not drop as more users join (1)
• Fibre optic cable has a higher bandwidth than a wireless link (1) so more data can be sent along the cable each second (1)
• The cable gives a direct/physical path to the switch (1) so data is less likely to be lost and resent, which would slow the transfer (1)

Do not accept responses about security, reliability or users being unable to move around, as these are not about speed.

Do not accept answers that only say a wired/cable connection is faster, or that fibre is faster, without saying why.

Award up to two marks for a linked description such as:

• (Twisted pair/copper) cable only carries data over a limited distance (about 100 metres) (1) so sensors further away need another switch/device to pass the data on to the farmhouse (1)
• Fibre optic cable can carry data over much longer distances (1) so wired connections can reach sensors across the whole farm (1)
• Data sent further than the cable's range is not received (1) so the computer in the farmhouse does not get readings from those sensors (1)
• A wireless connection can reach sensors that are out of range of the cables (1) so a mix of the two can give readings across the whole site (1)

Allow responses about signal weakening/being lost over a long cable.

Do not accept responses about bandwidth or speed, as range is about distance, not the amount or rate of data.

Award up to two marks for a linked description such as:

• The bandwidth/capacity of the access point is shared between all the connected devices (1) so each device gets less bandwidth as more devices connect, which reduces the speed of data transfer (1)
• The devices have to take turns to transmit (contention) (1) so each device waits longer before it can send data, which increases latency (1)
• The access point can only support a maximum number of connections (1) so once this limit is reached, further devices cannot connect to the network (1)

Allow 'contention' as an alternative to devices having to take turns to transmit.

Allow 'the network becomes slower' as the second mark only where it is linked to shared bandwidth, to devices taking turns to transmit or to the maximum number of connections.

Do not accept a response that only states the network becomes slower, or that there are more devices/more traffic, without saying how this affects performance.

Do not accept responses about range or interference unless they are linked to the number of connected devices.

Award up to two marks for a linked explanation such as:

• Each router chooses the best route at the time (1) so when a route becomes busy/congested or fails, later packets are forwarded along a different path (1)
• Routers forward each packet separately (1) so the path a packet takes depends on the traffic conditions when that packet arrives (1)
• A router may send a packet to a different next router (1) if its routing table shows a better/less congested route for that packet (1)
• Traffic on the internet changes (1) so no single path is kept for the file and each packet can use whichever route is best when it is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow reference to a routing table, or to how a router decides the route, as part of the linked reason.

Do not accept 'the packets have different IP addresses' because all packets from the same file have the same destination IP address, even though their routes can differ.

Do not accept 'the internet is busy' or 'there is a lot of traffic' on its own without linking this to the router choosing a different route.

Do not accept 'different routers send the packets' on its own without a reason why a different router/route is chosen.

Do not accept an answer that only says the packets take different routes without explaining why.

Award up to two marks for a linked explanation such as:

• If one cable/device fails, the other devices on the network are not affected (1) because each device has its own separate connection to the central switch (1)
• Faults are easier to find (1) because each device has its own cable, so the faulty cable can be checked on its own (1)
• Data is sent only to the intended device (1) because the central switch forwards the data only to the device it is addressed to (1)
• Data transfer is fast (1) because each device has its own cable, so devices do not share the cable with each other (1)
• New devices can be added easily (1) because a device only needs one cable to a spare port on the central switch (1)

For both marks, the expansion must follow/associate with the statement.

A benefit stated on its own can earn one mark; the second mark is only for a linked reason.

Accept 'switch' for the central device.

Do not accept 'server' or 'hub' for the central device.

Do not accept 'hub', as a hub sends data to all devices, not only to the intended device.

Do not award a mark for responses that say only that the network is better/more reliable/easier without naming a benefit.

Award up to two marks for a linked explanation such as:

• Fibre optic cables have a higher bandwidth than copper cables (1) so a greater amount of data can be transferred each second (1)
• Fibre optic cables carry data as pulses of light (1) so a greater amount of data can be carried each second than by the electrical signals in a copper cable (1)
• Fibre optic cables are not affected by electromagnetic interference (1) so the maximum amount of data the cable can carry is not reduced by nearby electrical equipment (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'faster' on its own without expansion as to what is faster, such as a greater amount of data being carried each second.

Do not accept 'more reliable' or 'less interference' on its own without linking it to the amount of data that can be carried.

Do not accept answers about the cost of the cables or their installation.