Edexcel GCSE Computer Science (1CP2) Exam Questions

• C It keeps the car at a constant speed (1)
• The only correct answer is C. The correct answer is it keeps the car at a constant speed.
• A is not correct because controlling the interior lights is done by a different embedded system in the car
• B is not correct because displaying a map for the driver is done by the satellite navigation system
• D is not correct because sounding an alarm is done by a different embedded system in the car

• A A drive head that moves over the spinning platters (1)
• The only correct answer is A. The correct answer is a drive head.
• B is not correct because a laser that measures reflected light is used by optical media such as a CD or Blu-ray Disc
• C is not correct because trapping electric charges is how solid state (flash) storage stores data
• D is not correct because pits and lands are burnt or pressed onto optical media, not onto a hard disk drive

• A Blu-ray Disc (1)
• The only correct answer is A. The correct answer is Blu-ray Disc.
• B is not correct because a CD stores less data than a Blu-ray Disc, up to about 700 MB
• C is not correct because a DVD stores less data than a Blu-ray Disc, up to about 4.7 GB (single-layer) or 8.4 GB (dual-layer)
• D is not correct because magnetic tape is not an optical storage medium

Award one mark for any of the following up to a maximum of two marks:

• Focus the lens/autofocus (1)
• Control the shutter (speed) (1)
• Control the flash/decide when the flash is needed (1)
• Measure the light level to set the exposure/the aperture (1)
• Stabilise the lens/image stabilisation (1)
• Zoom the lens in and out (1)
• Detect a face/smile (1)

Do not accept 'take a photograph'/'take a picture'/'capture an image', as taking photographs is the function of the camera, which is given in the question.

Do not accept 'press the button' as this is an action of the user, not a function performed by the embedded system.

Do not accept vague answers such as 'use the camera', 'turn the camera on and off' or 'make the camera work', which do not name a function that the embedded system performs.

Award one mark for any of the following up to a maximum of two marks:

• Hard disk drive/HDD (1)
• External/portable hard disk drive (1)
• Magnetic tape drive (1)
• Magnetic tape (1)

Allow a named device or the storage media type, e.g. hard disk/hard disc for hard disk drive, tape for magnetic tape

Allow floppy disk/floppy disk drive

Do not accept solid state devices (SSD, USB flash drive/memory stick, SD card/memory card) or optical media (CD/DVD/Blu-ray) as these do not store data using magnetism

Award one mark for any of the following up to a maximum of two marks:

• An arithmetic operation, e.g. addition/subtraction/multiplication/division (1)
• A logical operation, e.g. comparing two values (is A > B?) / using AND, OR, NOT (1)

Do not accept decoding instructions, fetching instructions or controlling the timing of the CPU, as these are carried out by the control unit.

Award up to two marks for a linked description such as:

• Decodes instructions (1) to determine what action/operation is required (1)
• Sends control signals (1) along the control bus to coordinate/control the actions of other components (1)
• Controls the fetch stage (1) by causing the next instruction to be fetched from main memory/RAM (1)
• Controls the execute stage (1) by telling the ALU/other components when to carry out the required operation (1)

Do not accept responses relating to how the control unit affects performance, such as increasing clock speed.

Do not accept responses that describe the role of the ALU, registers or clock instead of the control unit.

Do not accept responses about the ALU performing calculations unless the control unit controlling the ALU is also stated.

Award up to two marks for a linked description such as:

• Carries the address of a memory location (1) that the CPU needs to access/read from or write to (1)
• Transfers the address of the next instruction (1) to main memory so it can be fetched (1)
• Carries the address of data/instructions (1) from the CPU to main memory (1) so the correct location is found
• Is used by the CPU to specify/identify a location in memory (1) by carrying its address along the bus (1)

Award one mark for a correct point even if not developed, e.g. 'it carries the address of a memory location'.

Accept 'the address of the next instruction' without mentioning the program counter, if it is linked to being sent to main memory/to be fetched.

Do not accept responses about carrying data or control signals.

Do not accept responses that say the address bus sends/transfers instructions or data without referring to addresses.

Do not accept vague responses such as 'it carries addresses' without saying what the address is for.

Award up to two marks for a linked description such as:

• Carries out arithmetic operations/calculations, such as addition or subtraction (1) so that the result can be stored in a register (1)
• Carries out logical operations, such as comparing two data items (1) to see which one is greater/larger (1)
• Compares two data items (1) to decide whether a condition is true / which path a program takes next (1)

Allow the result of an arithmetic or logical operation being held/stored in a register, but only where the operation is named.

Do not accept answers that say the ALU stores data or results without naming an operation (registers/main memory store data).

Do not accept answers about controlling components, decoding instructions or timing (that is the control unit or the clock).

Do not award credit for 'it processes data' on its own; an arithmetic or a logical operation must be named.

An example on its own, e.g. 'it adds two numbers', does not earn a second mark; the second mark needs a linked development.

Award up to two marks for a linked explanation such as:

• It decodes instructions (1) so the CPU knows what operation/instruction to perform (1)
• It sends control signals (1) to coordinate/control the flow of data/instructions between components (1)
• It manages/directs the fetch-decode-execute cycle (1) by controlling the sequence/timing of the stages (1)
• It directs the other components of the CPU (1) so that each instruction is fetched/decoded/executed in the correct order (1)

For both marks, the expansion must follow/associate with the statement.

Allow an explanation that the control unit directs data/instructions along the address/data/control buses (1) so the fetch-decode-execute cycle can take place (1)

Do not accept a generic 'it controls the CPU/components' point without linked expansion as to what is controlled/directed.

Do not accept 'it fetches instructions from memory' on its own; credit only if linked to the address/data/control buses or control signals.

Do not accept 'it stores/holds the instruction/data' as this is the role of a register.

Do not accept answers about the ALU performing calculations.