Edexcel GCSE Computer Science (1CP2) Exam Questions

• B 7 (1)
• The only correct answer is B. The correct answer is 7 bits.
• A is not correct because 6 bits give only 64 different characters
• C is not correct because 8 bits are used by extended ASCII to give 256 characters
• D is not correct because 16 bits give 65 536 different characters, which is far more than the 128 in ASCII

• B 7 (1)
• The only correct answer is B. The correct answer is 7.
• A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
• C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
• D is not correct because 70 is the number of characters needed, not a number of bits

Award one mark for any of the following:

• The concentration/density of pixels in an area (1)
• The number of pixels per inch (PPI) / pixels per unit area (1)
• The width and height/dimensions of the image in pixels (1)

Do not accept the number of pixels in the image on its own, without dimensions or an area, e.g. 'the total number of pixels'

Do not accept colour depth / the number of bits used per pixel / the number of colours

Do not accept file size in bytes / the amount of storage the image uses / screen size / image quality

Award one mark for:

• The number of samples taken per second (1)

Allow captured/recorded for taken.

Allow 'samples per second'.

Allow 'each second' for 'per second'.

Allow Hz/hertz as the unit.

Do not accept the time between samples/sample interval.

Do not accept 'the number of samples' without a per second/time reference.

Do not accept the number of bits used per sample/bit depth.

Award one mark for any of the following:

• Increase the sample rate / take more samples per second (1)
• Increase the bit depth/sample resolution / use more bits per sample (1)
• Decrease the sample interval (1)

Do not accept increase the amplitude/volume

Do not accept decrease the sample rate / increase the sample interval

Award up to two marks for a linked description such as:

• The height of the wave is measured at each sample (1) and stored as a binary value (1)
• The amplitude at a sample point is converted into a binary number using the bit depth (1) so each sample stores the height of the wave (1)
• A larger amplitude is stored as a larger binary value (1) so louder parts of the sound are represented by higher values (1)

Do not accept answers that only define amplitude as the height/loudness of the wave.

Do not accept answers about the number of samples taken each second (sample rate).

Award up to two marks for a linked explanation such as:

• Only 16 different characters can be represented (1) so there are not enough characters codes for every letter of the alphabet (1)
• 4 bits give only 16 different combinations (1) which is not enough for the uppercase letters, lowercase letters, digits and symbols on a keyboard (1)
• More than 16 characters are needed on a keyboard (1) so some letters, digits or symbols cannot be represented (1)
• The number of character codes available is limited to 16 (1) because 4 bits give 2 to the power of 4 combinations (1)

For both marks, the expansion must follow/associate with the statement.

Calculating that 4 bits give 2 to the power of 4 = 16 combinations can earn either the point or the linked reason, provided the other half of the answer says what this means (too few characters/codes).

Allow an expansion that names only the letters of the alphabet, e.g. there are not enough character codes for the 26 letters (1).

Do not accept '4 bits can only store 4 characters' (the number of bits is not the number of characters).

Do not accept 'it can only store 16 bits' (16 is the number of character codes/combinations, not the number of bits).

Do not accept 'not enough memory/storage' (the limitation is the number of character codes, not the amount of storage).

Do not accept 'it is limited/smaller' without saying how many characters/codes are available or what cannot be represented.

Award up to two marks for a linked explanation such as:

• Each sample is stored using more bits (1) so the amplitude can be recorded more precisely (1)
• More different amplitude values can be represented (1) because each extra bit doubles the number of possible values (1)
• The height of the wave at each sample point is measured more accurately (1) so the digital wave is closer to the analogue wave (1)
• The gap between the true amplitude and the stored value is smaller (1) because there are more values for the sample to be rounded to (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the sound is sampled more often' or 'more samples are taken per second', as these describe the sample rate, not the bit depth.

Do not accept 'the file size increases' on its own as an effect on the representation of the sound.

Indicative content

How characters are mapped to codes

• Each character in a book title or author name is given a unique 7-bit binary code from the ASCII character set.
• The letter A, for example, is stored as the code 1000001 and the letter B as 1000010, so the catalogue can store letters as binary.
• Uppercase letters, lowercase letters, digits, punctuation and the space character each have their own ASCII code.
• The same character always uses the same code, so the text can be stored and read back correctly by the library system.

Why 7 bits are used for each character

• Seven bits give 2 to the power of 7, which is 128 different bit patterns, and this is enough to represent the letters, digits and punctuation needed in the catalogue.
• A standard keyboard has around 98 characters, so 6 bits would give only 64 codes and would not be enough.
• Using a fixed 7 bits per character means every character takes the same amount of storage, which makes the catalogue file simple to process.

Benefits of using ASCII for the catalogue

• ASCII is a standard character set, so the catalogue data can be exchanged between different computers and software.
• Author names and titles entered on one system will display correctly on another system that uses ASCII.
• ASCII uses only 7 bits per character, so the catalogue takes less storage than a character set that uses more bits.
• It is simple to encode and decode because each character has a single fixed code.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Do not accept 8 bits or 256 characters as features of 7-bit ASCII; these are extended ASCII.

Indicative content

The number of characters that 7-bit ASCII can represent

• Seven-bit ASCII gives 2 to the power of 7, which is 128 different codes, so it can represent a maximum of 128 different characters.
• This is enough for the English alphabet, digits and common punctuation, but it is a fixed and limited set.
• The website may need more than 128 characters once customer names from different countries are included.

Characters that cannot be represented

• Accented letters such as é do not have a 7-bit ASCII code, so they cannot be stored correctly.
• Characters from any alphabet other than the Latin one, such as Greek or Cyrillic letters, cannot be represented in 7-bit ASCII.
• If a customer enters a character that is not in the character set, the website may store the wrong character or show a replacement symbol.
• The company may have to misspell or simplify a customer's name because the required character cannot be stored.

The effect of using more bits for each character

• Each extra bit doubles the number of available codes, so for n bits there are 2 to the power of n codes; 8 bits give 256 codes and 16 bits give 65 536 codes.
• Using more bits allows a larger character set to represent accented letters and other alphabets.
• More bits per character means each character takes more storage, so the website's text files and pages are larger.
• Larger pages take longer to transmit over the internet to a customer.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both the limit of 128 codes and at least one type of character that cannot be represented; a point about using more bits on its own is not sufficient for Level 3, and not every bullet needs to be covered for Level 3.

Do not accept the idea that 7-bit ASCII can represent all characters, that extended or 8-bit ASCII can represent every character in every alphabet, or that accented letters are stored as plain letters without the accent.