Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Short recall1 markImages Swap Remove

A bitmap image uses one bit per pixel.

State the limitation this places on the number of colours in the image.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • Only two different colours can be represented/stored (1)
  • Each pixel can only be one of two values (1)
  • The image can only be shown in black and white (1)

Allow answers that give the number of colours, e.g. two colours, 2 colours

Allow any pair of two colours, e.g. black and white, black and grey

Do not accept low resolution/poor quality/lower quality

Do not accept only one colour/can only show black

Do not accept 2 bits/2^1 without a statement about the number of colours that can be represented

Example answers and how they were marked
Full marks1/1

Only two colours can be represented, such as black and white.

Why: States that only two different colours can be represented (1)

No marks0/1

The image will have a low resolution.

Why: Confuses colour depth with resolution; low resolution is not accepted

No marks0/1

The image can only show black.

Why: One colour is all a single value can give; the limitation is that only two colours can be represented, so this is not accepted

2Describe2 marksCharacter Sets Swap Remove

A computer uses 7-bit ASCII to represent characters.

The character M has the ASCII code 77. Describe how the character M is represented in the computer.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The denary code 77 is converted to binary (1) to give the 7-bit pattern 1001101 (1)
  • The character M is represented by a unique ASCII code/number (1) that is stored as a 7-bit binary pattern (1)
  • 7 bits are used to store the code for M (1) so 128 different characters can be represented (1)
  • The binary pattern 1001101 is stored in memory (1) using one 7-bit code for each character (1)

Do not accept answers that only state the ASCII code 77, as this is given in the question.

Do not accept 01001101, as this is an 8-bit pattern.

Do not accept ASCII described as a programming language or a method of encryption.

Example answers and how they were marked
Full marks2/2

77 is converted to binary, giving 1001101. This is stored using 7 bits for the character M.

Why: Linked description: converts the code to binary (1) to give the 7-bit pattern 1001101 (1).

Some marks1/2

77 is changed into binary so it can be stored.

Why: Gives the conversion of 77 to binary (1) but does not give the 7-bit pattern 1001101 (0).

No marks0/2

ASCII is a programming language that stores letters as numbers.

Why: Describes ASCII as a programming language, which the mark scheme says is not creditworthy; no linked description of how M is represented.

3Explain2 marksImages Swap Remove

Two versions of the same photograph are displayed at the same size on a screen. Version A is 800 × 600 pixels. Version B is 1600 × 1200 pixels.

Explain why Version B can show more detail.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1)
  • Version B has a higher pixel density (1) so finer detail can be represented (1)
  • The pixels in Version B are smaller (1) so more detail can be captured in the same space (1)
  • Version B has a higher resolution (1) because there are more pixels per unit of area (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'more pixels' on its own without saying same area/pixel density/smaller pixels.

Do not accept higher colour depth or more colours.

Example answers and how they were marked
Full marks2/2

Version B has more pixels in the same area so each pixel represents a smaller part of the image.

Why: Linked point (1) and reason (1): more pixels in the same area means smaller pixels and more detail.

Some marks1/2

Version B has more pixels in the same area.

Why: One mark for the point about pixel density; the linked reason about smaller pixels or finer detail is missing.

No marks0/2

Version B has a higher colour depth, so it can display more colours.

Why: Colour depth is not the reason for more detail here; this is the common misconception that colour depth increases resolution.

4Explain2 marksCharacter Sets Swap Remove

A computer system uses a 4-bit code to represent the characters typed on its keyboard.

Explain one limitation of using 4 bits to represent characters.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only 16 different characters can be represented (1) so there are not enough characters codes for every letter of the alphabet (1)
  • 4 bits give only 16 different combinations (1) which is not enough for the uppercase letters, lowercase letters, digits and symbols on a keyboard (1)
  • More than 16 characters are needed on a keyboard (1) so some letters, digits or symbols cannot be represented (1)
  • The number of character codes available is limited to 16 (1) because 4 bits give 2 to the power of 4 combinations (1)

For both marks, the expansion must follow/associate with the statement.

Calculating that 4 bits give 2 to the power of 4 = 16 combinations can earn either the point or the linked reason, provided the other half of the answer says what this means (too few characters/codes).

Allow an expansion that names only the letters of the alphabet, e.g. there are not enough character codes for the 26 letters (1).

Do not accept '4 bits can only store 4 characters' (the number of bits is not the number of characters).

Do not accept 'it can only store 16 bits' (16 is the number of character codes/combinations, not the number of bits).

Do not accept 'not enough memory/storage' (the limitation is the number of character codes, not the amount of storage).

Do not accept 'it is limited/smaller' without saying how many characters/codes are available or what cannot be represented.

Example answers and how they were marked
Full marks2/2

Only 16 different characters can be represented, so there are not enough character codes for all 26 letters.

Why: Gives the point that only 16 characters can be represented (1) and links it to the reason that this is fewer than the letters needed (1).

Some marks1/2

Only 16 different characters can be represented.

Why: Gives the point that only 16 characters can be represented (1) but does not explain what cannot be represented.

No marks0/2

It can only store 4 characters because there are 4 bits.

Why: Misconception that the number of bits equals the number of characters, which the mark scheme says not to accept; no creditworthy point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.