Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Short recall1 markImages Swap Remove

A bitmap image has a resolution.

State what is meant by the resolution of an image.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • The concentration/density of pixels in an area (1)
  • The number of pixels per inch (PPI) / pixels per unit area (1)
  • The width and height/dimensions of the image in pixels (1)

Do not accept the number of pixels in the image on its own, without dimensions or an area, e.g. 'the total number of pixels'

Do not accept colour depth / the number of bits used per pixel / the number of colours

Do not accept file size in bytes / the amount of storage the image uses / screen size / image quality

Example answers and how they were marked
Full marks1/1

The concentration of pixels in an area, such as the number of pixels per inch.

Why: Gives the density/concentration of pixels in an area, and pixels per inch (1)

No marks0/1

The number of pixels in the image.

Why: A bare total pixel count is not accepted without dimensions or an area

No marks0/1

The number of bits used to store each pixel's colour.

Why: Describes colour depth, not resolution, and colour depth is not accepted

2Describe2 marksSound Swap Remove

Sound is converted into binary using a limited bit depth.

Describe one limitation of representing a sound sample with a limited bit depth.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Only a fixed number of amplitude values/levels can be represented (1) so the amplitude is rounded to the nearest available value/level (1)
  • Fewer amplitude values/levels are available to choose from (1) so similar/close amplitudes cannot be stored as different values (1)
  • The exact amplitude often falls between available values/levels (1) so the stored amplitude is not exact/less accurate (1)

Answers must relate to the number of bits per sample (bit depth) and the amplitude values/levels it can represent.

Do not accept answers about the sample rate, sample interval or the number of samples taken, or that confuse bit depth with the number of samples.

Do not award 'lower quality'/'more detail'/'less detail' unless it is linked to the number of amplitude values/levels.

Do not accept 'the sound cannot be played/stored' without a linked limitation.

Example answers and how they were marked
Full marks2/2

Only a fixed number of amplitude values can be represented, so the amplitude is rounded to the nearest available value and some detail is lost.

Why: Linked points: fixed number of amplitude values (1) and rounding to the nearest available value (1).

Some marks1/2

Only a fixed number of amplitude values can be represented.

Why: Gives the first linked point only (1); it does not develop what this limitation leads to.

No marks0/2

A lower bit depth means fewer samples are taken, so parts of the sound are missed.

Why: Confuses bit depth with the number of samples/sample rate; no creditworthy point about amplitude values is given.

3Explain2 marksImages Swap Remove

Two versions of the same photograph are displayed at the same size on a screen. Version A is 800 × 600 pixels. Version B is 1600 × 1200 pixels.

Explain why Version B can show more detail.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1)
  • Version B has a higher pixel density (1) so finer detail can be represented (1)
  • The pixels in Version B are smaller (1) so more detail can be captured in the same space (1)
  • Version B has a higher resolution (1) because there are more pixels per unit of area (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'more pixels' on its own without saying same area/pixel density/smaller pixels.

Do not accept higher colour depth or more colours.

Example answers and how they were marked
Full marks2/2

Version B has more pixels in the same area so each pixel represents a smaller part of the image.

Why: Linked point (1) and reason (1): more pixels in the same area means smaller pixels and more detail.

Some marks1/2

Version B has more pixels in the same area.

Why: One mark for the point about pixel density; the linked reason about smaller pixels or finer detail is missing.

No marks0/2

Version B has a higher colour depth, so it can display more colours.

Why: Colour depth is not the reason for more detail here; this is the common misconception that colour depth increases resolution.

4Explain2 marksCharacter Sets Swap Remove

ASCII uses a fixed number of bits to represent each character.

Explain one reason why ASCII uses 7 bits to represent each character.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • 7 bits give 128 different codes/combinations (1) which is enough to represent all the characters on a keyboard (1)
  • 7 bits allow 128 unique characters (1) so uppercase and lowercase letters, digits and punctuation can all be represented (1)
  • 6 bits give only 64 combinations (1) which is not enough for the number of characters on a keyboard (1)
  • A keyboard needs to represent more than 64 different characters (1) so 7 bits are needed to give the 128 combinations required (1)
  • A fixed number of 7 bits gives 128 possible codes (1) which is enough for the characters ASCII represents, so more bits are not needed (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'because ASCII is 7-bit' or 'because 7 bits is enough' as these repeat the question without giving the number of combinations or saying what they allow.

Do not accept '7 bits give 256 characters'; 256 combinations come from 8 bits (extended ASCII).

Allow 'ASCII has 128 characters/codes' for the 128 point.

Example answers and how they were marked
Full marks2/2

7 bits give 128 different codes, which is enough for every letter, digit and punctuation symbol on a keyboard.

Why: Gives the point that 7 bits give 128 codes (1) and links it to the reason that this is enough for all the characters on a keyboard (1).

Some marks1/2

7 bits give 128 different combinations.

Why: Gives the point that 7 bits give 128 combinations (1) but does not say what this number of combinations allows, so the linked reason (1) is not earned.

No marks0/2

Because ASCII uses 7 bits so it can store 256 characters.

Why: Repeats the question and gives the wrong number of characters (256 is 8-bit extended ASCII), so there is no creditworthy point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.