Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Short recall1 markImages Swap Remove

Each pixel in a bitmap image is stored using a number of bits.

Define the term colour depth.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • The number of bits per pixel (1)
  • The number of bits used to represent/store the colour of each pixel (1)

Allow bit depth

Do not accept the number of colours a pixel can have on its own

Do not accept the number of pixels in the image (this is the resolution/image size)

Example answers and how they were marked
Full marks1/1

The number of bits used to store the colour of one pixel.

Why: Gives the number of bits per pixel (1)

No marks0/1

The number of colours that each pixel can use.

Why: Gives the number of colours, not the number of bits; the mark scheme does not accept this on its own

No marks0/1

The number of pixels in the image.

Why: Confuses colour depth with resolution/image size, which the mark scheme does not accept

2Describe2 marksCharacter Sets Swap Remove

Uppercase letters are represented in a computer using 7-bit ASCII codes.

Describe how the ASCII codes for the uppercase letters A to Z are arranged.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The codes run in alphabetical order/consecutively (1) so each letter has a code one more than the letter before it (1)
  • A has the code 65 and Z has the code 90 (1) so the codes for the letters in between increase by 1 each time (1)
  • The letters are stored in sequence (1) so B is A + 1, C is B + 1 and so on (1)

Accept the codes given in denary (65, 90) or as 7-bit binary (1000001, 1011010).

Do not accept 'the codes go up' or 'the codes are in order' on its own, as neither gives the step of 1 or links one letter to the next.

Do not accept 'each uppercase letter has a different code' on its own, as this does not describe the arrangement.

Example answers and how they were marked
Full marks2/2

The codes are in alphabetical order, so B is one more than A and C is one more than B.

Why: Codes are consecutive/in order (1) with the linked step of one more for each letter (1).

Some marks1/2

A is 65 and Z is 90.

Why: Gives the first half of the linked pair, the start and end codes (1), but does not give the linked development, the increase of 1 between letters (0).

No marks0/2

The ASCII codes for uppercase letters go up.

Why: 'Codes go up' on its own gives no step of 1 and no link to the next letter, so it is not creditworthy (0) under the 'Do not accept' line.

3Explain2 marksSound Swap Remove

Each sample of a sound wave is stored in binary using a fixed number of bits.

Explain one limitation of representing an analogue sound wave in binary when only a small number of bits is available for each sample.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only a limited number of different amplitude values can be stored (1) so each sample is rounded to the nearest available value and the digital wave does not match the analogue wave exactly (1)
  • The wave is continuous but only a limited set of values can be represented (1) so amplitude detail/accuracy is lost (1)
  • Quiet and loud parts of the sound may be stored as the same value (1) because there are too few values to tell them apart (1)
  • The range of amplitudes that can be represented is limited (1) so the loudest/quietest parts of the sound cannot be stored accurately (1)

For both marks, the expansion must follow/associate with the statement.

Do not award marks for answers that say the sound cannot be stored or heard at all.

Do not award answers about the number of samples taken/sample rate, as the number of bits limits the amplitude values, not how often the wave is sampled.

Do not accept 'lower quality'/'less accurate'/'less detail' on its own without a link to the amplitude values that can be stored/the number of bit combinations.

Do not accept 'the file size is smaller' without a link to the accuracy or the range of values that can be stored.

Example answers and how they were marked
Full marks2/2

Only a small number of amplitude values can be stored, so each sample is rounded to the nearest value and does not match the original wave exactly.

Why: Point (limited number of amplitude values) (1) with linked reason (samples are rounded and the wave is not exact) (1).

Some marks1/2

Only a small number of amplitude values can be stored.

Why: Creditworthy point (1) but no linked limitation such as rounding or lost accuracy, so only one mark.

No marks0/2

The sound cannot be stored at all because there are not enough bits to hold every sample.

Why: Misconception: the sound can still be stored, just less accurately, so no mark is awarded.

4Explain2 marksSound Swap Remove

The same sound is recorded twice using different sample intervals.

Explain the effect of using a longer sample interval on the digital recording.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Fewer samples are taken every second (1) so less detail of the sound wave is captured (1)
  • Fewer samples are taken every second (1) so the file is smaller/uses less storage space (1)
  • The wave is measured less often (1) so parts/changes in the wave between samples are missed (1)

For both marks, the expansion must follow/associate with the statement.

The 'fewer samples are taken/measured less often' point can only be credited once; the second mark is for a valid expansion linked to it.

Do not accept restating the question, e.g. 'the time between measurements is longer' or 'the sample interval is longer', as either the point or the expansion.

Do not accept 'the sample rate is lower' as the expansion, as this says the same thing as a longer sample interval.

Do not accept 'the sound is lower quality/less accurate' on its own without saying what is lost, e.g. less detail of the wave captured/parts of the wave missed.

Do not accept answers about using fewer bits per sample or about compression, as these do not follow from the sample interval.

Example answers and how they were marked
Full marks2/2

Fewer samples are taken every second, so less detail of the sound wave is captured and the recording is less accurate.

Why: Point (fewer samples each second) (1) with linked reason (less detail of the wave captured) (1).

Some marks1/2

Fewer samples are taken every second.

Why: Creditworthy point (1) but no linked effect on the detail or size of the recording, so only one mark.

No marks0/2

The samples are stored using fewer bits, so the sound is less accurate.

Why: Describes a smaller bit depth rather than a longer sample interval, so no mark is awarded.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.