Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 573 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 8 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

A new character set must be able to represent 70 different characters.

Identify the minimum number of bits needed to represent each character.

[1 mark]
  • A6
  • B7
  • C8
  • D70
Mark scheme
  • B 7 (1)
  • The only correct answer is B. The correct answer is 7.
  • A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
  • C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
  • D is not correct because 70 is the number of characters needed, not a number of bits
Example answers and how they were marked
Full marks1/1

B 7

Why: The only correct answer: 7 bits give 128 combinations, enough for 70 characters, and it is the smallest number of bits that does (1).

No marks0/1

C 8

Why: Distractor, no credit: a single-tick item has no partial credit, and 8 bits is not the minimum because 7 bits already give 128 combinations, so the scheme's C line gives no mark.

No marks0/1

A 6

Why: Misconception, no credit: 6 bits give only 64 combinations, which cannot represent 70 different characters, so the scheme's A line gives no mark.

2Short recall1 markSecondary Memory Swap Remove

Data is stored on optical discs as pits and lands.

Name the component in an optical disc drive that reads this data.

[1 mark]
Mark scheme

Award one mark for:

  • Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Example answers and how they were marked
Full marks1/1

Laser

Why: Laser is the creditworthy answer (1).

No marks0/1

A read/write head

Why: Read/write head is not accepted by the mark scheme; it reads magnetic media, not optical discs, so no marks are awarded.

No marks0/1

Pits and lands

Why: Pits and lands are what the laser reads, not the component that reads the data, so the mark scheme does not accept them.

3Describe2 marksLow and High Level Languages Swap Remove

A device driver is software that allows the operating system to control a piece of hardware. Device drivers are often written in a low-level programming language.

Describe one reason why a low-level programming language is suitable for writing a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Instructions can manipulate/control the hardware/memory/registers directly (1) so the driver can control the specific device it is written for (1)
  • The code is written for one specific processor/architecture (1) so it works with the exact hardware it will control (1)
  • The programmer controls exactly how memory/registers are used (1) so the code is efficient and needs little memory, which suits a device that has limited memory (1)
  • Each instruction maps to one machine code instruction (1) so the driver code is small enough to fit in the memory of the device (1)

Extra detail, such as naming the device the driver controls, is not needed to earn the marks.

Do not accept 'it is closer to machine code' on its own: it must be developed to show how this helps the driver, e.g. it can control the hardware directly.

Do not accept 'it is faster/quicker' with no link to the hardware/device, e.g. the device responds quickly.

Do not accept 'it is easier to learn', 'it is easier to debug' or 'it takes less time to write'.

Example answers and how they were marked
Full marks2/2

Low-level instructions can manipulate the hardware and memory directly (1) so the driver can control the specific device it was written for, such as a sound card (1).

Why: Point about direct control of hardware/memory (1) linked to controlling the specific device (1). The named device is extra detail and is not needed.

Some marks1/2

Low-level instructions can manipulate the hardware directly.

Why: Correct point (1) but no linked development saying how this helps the device driver.

No marks0/2

It is closer to machine code so it runs faster than a high-level language.

Why: 'Closer to machine code' is not developed into how this helps the driver, and 'runs faster' is not linked to the hardware/device, so no mark.

4Explain2 marksProtocols & Layers Swap Remove

The TCP/IP model has four layers.

Explain one function of the transport layer when a file is sent over a network.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Splits the data/file into packets (1) so each packet can be sent separately across the network (1)
  • Adds a packet/sequence number to each packet (1) so the packets can be put back into the correct order at the destination (1)
  • Detects lost/missing packets (1) so they can be requested/resent (1)
  • Creates a connection between the two computers/hosts (1) before the file is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'segments' for 'packets' (TCP divides the data into segments, which become packets at the internet layer).

Do not accept 'sends the data/file' on its own without saying what the transport layer does to the data.

Do not accept naming TCP or a port number on its own without expansion.

Do not accept routing/addressing packets using IP addresses, which is the internet layer.

Example answers and how they were marked
Full marks2/2

The transport layer splits the data into packets (1) so each packet can be sent separately across the network (1).

Why: Linked point (1) and reason (1): splitting into packets lets each one be sent separately.

Some marks1/2

It splits the data into packets (1).

Why: Point (1) identified, but no linked reason given, so only the first mark is awarded.

No marks0/2

It routes the packets using IP addresses (0) so they reach the right destination.

Why: Routing using IP addresses is the internet layer, not the transport layer, so no credit is given.

5Calculate2 marksBinary Shifts Swap Remove

Computers manipulate binary patterns.

Complete the table with the result of applying the shift to the binary pattern.

[2 marks]
Binary patternShift8-bit binary result
1000 0001Logical shift right by 1
Mark scheme

Award one mark for each correct nibble in the correct order:

  • 0100 (1)
  • 0000 (1)

0 marks if the response is not 8-bit binary.

Example answers and how they were marked
Full marks2/2

0100 0000

Why: Every bit moves 1 place right, with 0s in from the left: both nibbles are correct (2).

Some marks1/2

0100 0001

Why: A slip in the last bit. The first nibble is correct (1); the second is not.

No marks0/2

0000 0010

Why: Shifts the bits the wrong way. Neither nibble is correct.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 23
E-waste 15 questions Manufacturing Technology 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.