Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 10 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

A new character set must be able to represent 70 different characters.

Identify the minimum number of bits needed to represent each character.

[1 mark]
  • A6
  • B7
  • C8
  • D70
Mark scheme
  • B 7 (1)
  • The only correct answer is B. The correct answer is 7.
  • A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
  • C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
  • D is not correct because 70 is the number of characters needed, not a number of bits
Example answers and how they were marked
Full marks1/1

B 7

Why: The only correct answer: 7 bits give 128 combinations, enough for 70 characters, and it is the smallest number of bits that does (1).

No marks0/1

C 8

Why: Distractor, no credit: a single-tick item has no partial credit, and 8 bits is not the minimum because 7 bits already give 128 combinations, so the scheme's C line gives no mark.

No marks0/1

A 6

Why: Misconception, no credit: 6 bits give only 64 combinations, which cannot represent 70 different characters, so the scheme's A line gives no mark.

2Short recall1 markUnits & Conversion Swap Remove

A file has a size of 2 kibibytes.

State the number of bytes in the file.

[1 mark]
Mark scheme

Award one mark for:

  • 2048 (1)
  • 2 × 1024 (1)
  • 2^11 (1)

Allow 2048 bytes.

Do not accept 2000, which is the number of bytes in two decimal kilobytes.

Do not accept 1024, which is the number of bytes in one kibibyte.

Do not accept 16, which is the number of bits in two bytes.

Example answers and how they were marked
Full marks1/1

2048

Why: 2048 is 2 × 1024, the number of bytes in 2 kibibytes (1).

No marks0/1

2000

Why: 2000 uses the decimal kilobyte, not the binary kibibyte; the mark scheme does not accept it.

No marks0/1

16

Why: 16 is the number of bits in two bytes, confusing bits with bytes; the mark scheme does not accept it.

3Explain2 marksThe Internet Swap Remove

Every device that connects to the internet is given an IP address.

Explain one reason why every device on the internet needs a unique IP address.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Data/packets are delivered to the correct device (1) because the IP address identifies that device on the internet (1)
  • A reply is sent back to the device that made a request (1) because the sender's IP address is used as the destination address for the reply (1)
  • Routers can forward packets to the right device (1) because each packet's destination IP address matches only one device (1)
  • A device can be contacted by other devices (1) because other devices use its IP address to send data to it (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'so the router knows where to send data' only when expanded to say the IP address identifies the destination device / is used by routers to forward the packet to that device.

Do not accept 'so it can connect to the internet' / 'so it can access the internet' without saying how the address is used to identify the device or deliver data to it.

Do not accept 'so the device can be identified' on its own without saying what the identification is used for, e.g. delivering data or returning a reply.

Do not award a mark for restating that an IP address is unique / every device has a different address.

Example answers and how they were marked
Full marks2/2

So that data reaches the correct device. The IP address is how the internet tells one device apart from another, so packets are sent to that device and not to a different one.

Why: Point (1): data reaches the correct device. Reason (1): the IP address identifies/tells devices apart, so packets are sent to that device.

Some marks1/2

So that packets go to the right device, because every device has a different address.

Why: Point (1): packets go to the right device. The reason only restates that every device has a different address, which the mark scheme says does not earn the second mark.

No marks0/2

So it can connect to the internet.

Why: No linked explanation of how the address is used; 'so it can connect to the internet' is not accepted without expansion.

4Discuss6 marksPurpose & Function of Operating Systems Swap Remove

A home computer is used to stream music, edit a video and download files at the same time.

Discuss how the operating system manages the processes running on the computer.

Your answer should include:

  • how the CPU is shared between processes
  • the states a process can be in
  • how the operating system responds when a process needs attention
[6 marks]
Mark scheme

Indicative content

How the CPU is shared between processes

  • The operating system uses multitasking to give each process a short time slice on the CPU, so the music, video editor and download appear to run at the same time.
  • The operating system decides which ready process will run next, so one program cannot keep the CPU to itself.
  • The operating system can stop a running process and move it back to ready when its time slice ends, so all processes make progress.

The states a process can be in

  • When a program is opened, the operating system creates a process and moves its instructions into RAM so it is ready.
  • The operating system moves a ready process to running when the CPU is free.
  • A running process becomes blocked when it is waiting for input or data, such as the download waiting for data to arrive.
  • When the process finishes, the operating system terminates it and releases the resources it was using.

How the operating system responds when a process needs attention

  • An interrupt is a signal to the CPU that needs immediate attention, so the operating system suspends the current process and runs the interrupt handler.
  • A hardware interrupt could be a printer out of paper, and a software interrupt could be an error in a program.
  • After the interrupt has been handled, the operating system can return the interrupted process to the CPU.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover at least two of scheduling, process states and interrupts.
  • A response that only states that the OS 'manages processes' or gives a program a turn, without expansion, is limited to Level 1.
Example answers and how they were marked
Full marks6/6

The OS uses multitasking to share the CPU. It gives each process, such as the music player and the video editor, a small time slice so they appear to run at the same time. It decides which ready process is next and how long it runs. When the video editor is opened, the OS creates a process and moves its instructions into RAM so it is ready; when the CPU is free it moves it to running. If the download is waiting for data, the OS marks it blocked so the CPU is not wasted. If the printer runs out of paper, a hardware interrupt tells the CPU to stop and run the interrupt handler; afterwards the OS returns to the process.

Why: Covers scheduling with time slices, process states (ready, running, blocked) and interrupts, with sustained application to the music, video editor and download. Level 3.

Some marks4/6

The operating system uses multitasking so the music and video editor can run at the same time. It gives each program a small amount of time on the CPU. When a program is opened it creates a process and puts it in RAM. If a process is waiting for input it is blocked.

Why: Covers CPU sharing and process states, with some application, but says nothing about interrupts. Level 2.

Some marks1/6

The operating system manages processes by giving each program a turn on the CPU. This stops the computer crashing when too many programs are open.

Why: Gives only a basic, undeveloped point about giving each program a turn, with no linkage or application. Level 1.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.