Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

A new character set must be able to represent 70 different characters.

Identify the minimum number of bits needed to represent each character.

[1 mark]
  • A6
  • B7
  • C8
  • D70
Mark scheme
  • B 7 (1)
  • The only correct answer is B. The correct answer is 7.
  • A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
  • C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
  • D is not correct because 70 is the number of characters needed, not a number of bits
Example answers and how they were marked
Full marks1/1

B 7

Why: The only correct answer: 7 bits give 128 combinations, enough for 70 characters, and it is the smallest number of bits that does (1).

No marks0/1

C 8

Why: Distractor, no credit: a single-tick item has no partial credit, and 8 bits is not the minimum because 7 bits already give 128 combinations, so the scheme's C line gives no mark.

No marks0/1

A 6

Why: Misconception, no credit: 6 bits give only 64 combinations, which cannot represent 70 different characters, so the scheme's A line gives no mark.

2Short recall2 marksSound Swap Remove

A sound wave is sampled and the amplitude of each sample is stored using a small number of bits.

Give two limitations of storing the sound in binary when only a small number of bits is available for each sample.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Only a limited/fixed number of amplitude values can be stored (1)
  • The amplitude of each sample is rounded/approximated to the nearest value that can be stored (1)
  • The recording is less accurate than the original analogue sound/does not match the analogue wave exactly (1)
  • Sounds louder than the highest amplitude that can be stored are clipped/distorted (1)
  • Sounds quieter than the lowest amplitude that can be stored cannot be represented/are lost (1)

Allow quantisation error/noise for the amplitude being rounded to the nearest value that can be stored, but do not award a second mark for the same idea

Allow a stated consequence as a separate mark only when it is a different point from the list, e.g. fewer amplitude values can be stored (1) so very quiet sounds are lost (1)

Do not accept 'lower quality'/'poorer sound' on its own; the answer must say the recording is less accurate than the original/does not match the analogue wave

Do not accept sample rate/sample interval/number of channels (stereo/mono), as these are not limited by the number of bits available for each sample

Do not accept remedies such as 'a larger bit depth would make it more accurate', as these do not describe a limitation

Do not accept answers about file size, compression or playback method

Do not accept a statement that repeats the stem, e.g. 'the sound is stored in binary using a fixed number of bits'

Example answers and how they were marked
Full marks2/2

The amplitude of each sample has to be rounded to the nearest value that can be stored, and very quiet sounds cannot be represented.

Why: Amplitude rounded to the nearest stored value (1) and quiet sounds cannot be represented (1): two different points from the list.

Some marks1/2

The recording is less accurate than the original sound.

Why: The recording is less accurate than the original analogue sound (1); a second, different limitation is not given.

No marks0/2

The sample rate is too low, so parts of the wave are missed.

Why: Sample rate is not limited by the number of bits per sample, so it is not accepted.

3Explain2 marksSound Swap Remove

Analogue sound is converted to binary by sampling at regular intervals.

Explain one reason why increasing the sample rate improves the quality of a digitised sound.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • More samples are taken every second / the sample rate is higher (1) so the digital wave follows the shape of the analogue wave more closely (1)
  • The amplitude is measured more often / at shorter intervals (1) so fewer changes in the sound are missed between measurements (1)
  • The sample interval is shorter (1) so less of the sound wave is lost/goes unrecorded between samples (1)
  • More data points are recorded for the same length of sound (1) so the digital representation is a closer copy of the original sound (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the quality is better/higher' or 'the sound is clearer' as a point on its own without a reason such as more samples or more detail.

Do not accept 'the samples are more accurate' or 'more data is collected' without saying what becomes more accurate or what the extra data records.

Do not accept 'the file size is larger' as a reason for improved quality.

Do not accept answers about using more bits per sample, as these describe bit depth, not the sample rate.

Example answers and how they were marked
Full marks2/2

More samples are taken every second, so the digital representation follows the shape of the analogue wave more closely.

Why: Point (more samples each second) (1) with linked reason (follows the analogue wave more closely) (1).

Some marks1/2

More samples are taken every second.

Why: Creditworthy point (1) but no linked reason about what the extra samples achieve, so stays on one mark.

No marks0/2

Each sample is stored using more bits, so every measurement is more accurate.

Why: This describes bit depth, not the sample rate, so neither mark is awarded.

4Explain2 marksSound Swap Remove

Each sample of a sound wave is stored as a binary number.

Explain how increasing the bit depth affects the representation of a sound wave.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each sample is stored using more bits (1) so the amplitude can be recorded more precisely (1)
  • More different amplitude values can be represented (1) because each extra bit doubles the number of possible values (1)
  • The height of the wave at each sample point is measured more accurately (1) so the digital wave is closer to the analogue wave (1)
  • The gap between the true amplitude and the stored value is smaller (1) because there are more values for the sample to be rounded to (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the sound is sampled more often' or 'more samples are taken per second', as these describe the sample rate, not the bit depth.

Do not accept 'the file size increases' on its own as an effect on the representation of the sound.

Example answers and how they were marked
Full marks2/2

Each sample is stored using more bits, so the amplitude at each sample point can be recorded more precisely.

Why: Point (more bits per sample) (1) with linked reason (amplitude recorded more precisely) (1).

Some marks1/2

Each sample is stored using more bits.

Why: Creditworthy point (1) but no linked effect on the accuracy of the representation, so only one mark.

No marks0/2

It takes more samples every second, so the wave is stored in more detail.

Why: Confuses bit depth with sample rate, so no mark is awarded.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.