Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 10 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

A new character set must be able to represent 70 different characters.

Identify the minimum number of bits needed to represent each character.

[1 mark]
  • A6
  • B7
  • C8
  • D70
Mark scheme
  • B 7 (1)
  • The only correct answer is B. The correct answer is 7.
  • A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
  • C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
  • D is not correct because 70 is the number of characters needed, not a number of bits
Example answers and how they were marked
Full marks1/1

B 7

Why: The only correct answer: 7 bits give 128 combinations, enough for 70 characters, and it is the smallest number of bits that does (1).

No marks0/1

C 8

Why: Distractor, no credit: a single-tick item has no partial credit, and 8 bits is not the minimum because 7 bits already give 128 combinations, so the scheme's C line gives no mark.

No marks0/1

A 6

Why: Misconception, no credit: 6 bits give only 64 combinations, which cannot represent 70 different characters, so the scheme's A line gives no mark.

2Short recall1 markSound Swap Remove

A digital sound representation is created by sampling an analogue sound wave.

State one way the accuracy of this representation can be increased.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • Increase the sample rate / take more samples per second (1)
  • Increase the bit depth/sample resolution / use more bits per sample (1)
  • Decrease the sample interval (1)

Do not accept increase the amplitude/volume

Do not accept decrease the sample rate / increase the sample interval

Example answers and how they were marked
Full marks1/1

Increase the sample rate.

Why: Creditworthy point: increase the sample rate (1).

No marks0/1

Decrease the sample rate.

Why: Near-miss: decreasing the sample rate reduces accuracy, so no mark; the mark scheme's do-not-accept line covers this (0).

No marks0/1

Increase the volume of the sound.

Why: Misconception: loudness/amplitude is not a way to increase sampling accuracy; do not accept increase amplitude/volume (0).

3Explain2 marksImages Swap Remove

A bitmap image uses a colour depth of 8 bits. Each pixel is stored as a binary value.

Explain how the colour of a pixel is represented in a bitmap image.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each pixel is stored as a binary value/code (1) which represents/maps to a colour (1)
  • The binary value is used to look up a colour in a palette (1) so the pixel can be displayed in that colour (1)
  • A bit pattern is assigned to each colour (1) and each pixel stores the bit pattern for its colour (1)
  • The number of bits per pixel sets how many different colour codes exist (1) so each code can represent a different colour (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'pixels are binary' or 'the image is made of 1s and 0s' without saying a pixel's colour is represented by a binary value.

Do not accept RGB values stored as denary or hexadecimal.

Example answers and how they were marked
Full marks2/2

Each pixel stores a binary value (1); this value is used to look up the pixel's colour in a palette (1).

Why: Linked point (1) and reason (1): a binary value is stored for each pixel and maps to a colour.

Some marks1/2

A bit pattern is assigned to each colour.

Why: One mark for stating that colours have bit patterns; it does not say that each pixel stores the pattern for its colour.

No marks0/2

Each pixel stores the RGB colour as denary numbers between 0 and 255.

Why: Bitmap pixels are stored in binary, not as denary values; this common misconception earns no mark.

4Discuss6 marksImages Swap Remove

A school is creating a small logo to display on its website. The logo is stored as a bitmap image. Each pixel in the logo is stored as a binary value.

Discuss how the bitmap image of the logo is represented in binary.

Your answer should include:

  • pixels
  • binary values
  • the grid of pixels.
[6 marks]
Mark scheme

Indicative content

Pixels

  • A bitmap image is made up of picture elements, called pixels.
  • Each pixel is the smallest identifiable area of the image and has a single colour.
  • The logo is stored as a grid of pixels, and its width and height in pixels give its dimensions.
  • Each pixel is stored separately, so a larger grid needs more pixel values to be stored.

Binary values

  • Each pixel's colour is represented by a binary value.
  • The number of bits used for each pixel is the colour depth.
  • With n bits per pixel there are 2^n different binary values, so 2^n possible colours.
  • A black-and-white image can use one bit per pixel, with 0 for white and 1 for black.
  • More bits per pixel allow more colours to be represented in the logo.

Grid

  • The binary values are stored in order, row by row, so the computer can rebuild the grid.
  • The resolution is the number of pixels in the image, for example width × height.
  • A higher-resolution grid stores more pixels, so the logo can show more detail.
  • The image file stores the pixel values and data such as the image dimensions.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both pixels and binary values.

Do not accept resolution as the number of colours.

Example answers and how they were marked
Full marks6/6

A bitmap is a grid of pixels. Each pixel is one small area of the logo and has a single colour. The width and height of the grid are measured in pixels, so the logo's dimensions tell us how many pixels it contains. Each pixel's colour is stored as a binary value. The number of bits used for each pixel is the colour depth, and with n bits there are 2^n possible values, so 2^n possible colours. For example, 3 bits per pixel would allow 8 colours. The binary values are stored row by row so that the computer can rebuild the grid. A larger grid stores more pixel values, but it can show more detail. More bits per pixel let the logo use more colours, such as the school's colours.

Why: Covers pixels as the smallest areas of a grid (AO1), binary values with colour depth and 2^n colours (AO1), and applies these to the logo's grid and colours (AO2). Sustained and structured, so Level 3.

Some marks4/6

A bitmap is a grid of pixels. Each pixel is a small square with one colour. Each pixel is stored as a binary value. The logo needs a binary value for every pixel, so a bigger logo has more values. More bits per pixel means more colours.

Why: Gives pixels and binary values, with a simple link to the logo's size. Points are mostly independent and not developed into a full discussion, so Level 2.

Some marks1/6

A bitmap image is a grid of pixels. Resolution is the number of colours in the image. Each pixel is stored as a letter, so the logo can use any colour.

Why: One basic point: a bitmap is a grid of pixels. The rest is incorrect: resolution is not the number of colours, and pixel values are stored as binary, not letters.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.