Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

8 questions · 14 marks

Pick again

1Multiple choice1 markCharacter Sets Swap Remove

A new character set must be able to represent 70 different characters.

Identify the minimum number of bits needed to represent each character.

[1 mark]

Mark scheme

B 7 (1)
The only correct answer is B. The correct answer is 7.
A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
D is not correct because 70 is the number of characters needed, not a number of bits

Example answers and how they were marked

Full marks1/1

B 7

Why: The only correct answer: 7 bits give 128 combinations, enough for 70 characters, and it is the smallest number of bits that does (1).

No marks0/1

C 8

Why: Distractor, no credit: a single-tick item has no partial credit, and 8 bits is not the minimum because 7 bits already give 128 combinations, so the scheme's C line gives no mark.

No marks0/1

A 6

Why: Misconception, no credit: 6 bits give only 64 combinations, which cannot represent 70 different characters, so the scheme's A line gives no mark.

2Short recall1 markSound Swap Remove

To store sound in binary, an analogue sound wave is sampled at regular intervals.

Define the term 'sample rate'.

[1 mark]

Mark scheme

Award one mark for:

The number of samples taken per second (1)

Allow captured/recorded for taken.

Allow 'samples per second'.

Allow 'each second' for 'per second'.

Allow Hz/hertz as the unit.

Do not accept the time between samples/sample interval.

Do not accept 'the number of samples' without a per second/time reference.

Do not accept the number of bits used per sample/bit depth.

Example answers and how they were marked

Full marks1/1

The number of samples taken per second.

Why: States samples per second (1); 'per second' is accepted.

No marks0/1

The time between each sample.

Why: Defines sample interval, not sample rate; do not accept.

No marks0/1

The number of bits used for each sample.

Why: Describes bit depth, not sample rate; do not accept.

3Short recall2 marksSound Swap Remove

A sound wave is sampled and the amplitude of each sample is stored using a small number of bits.

Give two limitations of storing the sound in binary when only a small number of bits is available for each sample.

[2 marks]

Mark scheme

Award one mark for any of the following up to a maximum of two marks:

Only a limited/fixed number of amplitude values can be stored (1)
The amplitude of each sample is rounded/approximated to the nearest value that can be stored (1)
The recording is less accurate than the original analogue sound/does not match the analogue wave exactly (1)
Sounds louder than the highest amplitude that can be stored are clipped/distorted (1)
Sounds quieter than the lowest amplitude that can be stored cannot be represented/are lost (1)

Allow quantisation error/noise for the amplitude being rounded to the nearest value that can be stored, but do not award a second mark for the same idea

Allow a stated consequence as a separate mark only when it is a different point from the list, e.g. fewer amplitude values can be stored (1) so very quiet sounds are lost (1)

Do not accept 'lower quality'/'poorer sound' on its own; the answer must say the recording is less accurate than the original/does not match the analogue wave

Do not accept sample rate/sample interval/number of channels (stereo/mono), as these are not limited by the number of bits available for each sample

Do not accept remedies such as 'a larger bit depth would make it more accurate', as these do not describe a limitation

Do not accept answers about file size, compression or playback method

Do not accept a statement that repeats the stem, e.g. 'the sound is stored in binary using a fixed number of bits'

Example answers and how they were marked

Full marks2/2

The amplitude of each sample has to be rounded to the nearest value that can be stored, and very quiet sounds cannot be represented.

Why: Amplitude rounded to the nearest stored value (1) and quiet sounds cannot be represented (1): two different points from the list.

Some marks1/2

The recording is less accurate than the original sound.

Why: The recording is less accurate than the original analogue sound (1); a second, different limitation is not given.

No marks0/2

The sample rate is too low, so parts of the wave are missed.

Why: Sample rate is not limited by the number of bits per sample, so it is not accepted.

4Describe2 marksSound Swap Remove

Each sample of a sound is stored as a binary number.

Describe how bit depth affects the stored value of a sound sample.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

The bit depth is the number of bits used to store each sample/measurement (1) so a higher bit depth gives more possible/discrete values for the amplitude (1)
A higher bit depth records the amplitude more accurately (1) because the stored value can be closer to the actual height of the wave (1)
A low bit depth gives fewer possible amplitude values (1) so the amplitude is rounded to the nearest value, making the recording less accurate (1)

Do not accept sample rate/sample interval (number of samples per second) in place of bit depth.

Do not accept 'more bits gives better quality' or 'more accurate' on its own, without a development linked to the number of values or the amplitude stored.

Do not accept file size on its own, and a file size point cannot earn the second mark, as it does not describe the stored value.

Example answers and how they were marked

Full marks2/2

The bit depth is the number of bits used to store each sample, so a higher bit depth gives more possible values for the amplitude that can be stored.

Why: First point, the number of bits per sample (1), then the linked development, more possible values for the amplitude (1).

Some marks1/2

The bit depth is the number of bits used to store one sample.

Why: Gives the first point, the number of bits per sample (1), but does not develop how this affects the value that is stored.

No marks0/2

A higher bit depth makes the sound better quality and more accurate.

Why: Near-miss: 'better quality' and 'more accurate' on their own, with no development linked to the number of values or the amplitude, so no mark is awarded.

5Explain2 marksCharacter Sets Swap Remove

Characters typed on a keyboard are stored using ASCII.

Explain how the computer encodes the letter A using ASCII.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

The computer looks up the character in the ASCII character set/table (1) to find the code that represents it (1)
Each character has its own unique ASCII code (1) so the letter A is converted to and stored as a 7-bit binary pattern (1)
ASCII uses 7 bits for each character (1) so A is stored as its ASCII code 1000001 (binary) / 65 (denary) (1)

The second mark requires a linked expansion, so a point on its own (e.g. 'A has the code 65') can only earn one mark.

For both marks, the expansion must follow/associate with the statement.

Accept an 8-bit pattern with a leading 0 (e.g. 01000001) as the binary code for A.

Do not accept 'the character is stored as text' without saying it is changed into a code/binary.

Do not accept a binary value on its own (e.g. 1000001) without saying that it is the ASCII code/that the character is converted to it.

Example answers and how they were marked

Full marks2/2

The computer finds the unique ASCII code for A, which is 65 in denary, and stores it as the 7-bit binary pattern 1000001.

Why: Linked point that A is given its unique ASCII code (1) and reason/expansion that it is converted to and stored as a 7-bit binary pattern (1).

Some marks1/2

The computer changes the letter A into a number.

Why: Gives the point that the character is given a code/number (1) but no linked expansion saying it is converted to binary or stored, so stays on one mark.

No marks0/2

The letter A is stored as the number 1 because it is the first letter of the alphabet.

Why: Wrong reason and no creditworthy point: it does not say that the character is given its ASCII code and converted to binary.

6Explain2 marksImages Swap Remove

Two versions of the same photograph are displayed at the same size on a screen. Version A is 800 × 600 pixels. Version B is 1600 × 1200 pixels.

Explain why Version B can show more detail.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1)
Version B has a higher pixel density (1) so finer detail can be represented (1)
The pixels in Version B are smaller (1) so more detail can be captured in the same space (1)
Version B has a higher resolution (1) because there are more pixels per unit of area (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'more pixels' on its own without saying same area/pixel density/smaller pixels.

Do not accept higher colour depth or more colours.

Example answers and how they were marked

Full marks2/2

Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1).

Why: Linked point (1) and reason (1): more pixels in the same area means smaller pixels and more detail.

Some marks1/2

Version B has more pixels in the same area.

Why: One mark for the point about pixel density; the linked reason about smaller pixels or finer detail is missing.

No marks0/2

Version B has a higher colour depth, so it can display more colours.

Why: Colour depth is not the reason for more detail here; this is the common misconception that colour depth increases resolution.

7Explain2 marksSound Swap Remove

Analogue sound is converted to binary by sampling at regular intervals.

Explain one reason why increasing the sample rate improves the quality of a digitised sound.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

More samples are taken every second / the sample rate is higher (1) so the digital wave follows the shape of the analogue wave more closely (1)
The amplitude is measured more often / at shorter intervals (1) so fewer changes in the sound are missed between measurements (1)
The sample interval is shorter (1) so less of the sound wave is lost/goes unrecorded between samples (1)
More data points are recorded for the same length of sound (1) so the digital representation is a closer copy of the original sound (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the quality is better/higher' or 'the sound is clearer' as a point on its own without a reason such as more samples or more detail.

Do not accept 'the samples are more accurate' or 'more data is collected' without saying what becomes more accurate or what the extra data records.

Do not accept 'the file size is larger' as a reason for improved quality.

Do not accept answers about using more bits per sample, as these describe bit depth, not the sample rate.

Example answers and how they were marked

Full marks2/2

More samples are taken every second, so the digital representation follows the shape of the analogue wave more closely.

Why: Point (more samples each second) (1) with linked reason (follows the analogue wave more closely) (1).

Some marks1/2

More samples are taken every second.

Why: Creditworthy point (1) but no linked reason about what the extra samples achieve, so stays on one mark.

No marks0/2

Each sample is stored using more bits, so every measurement is more accurate.

Why: This describes bit depth, not the sample rate, so neither mark is awarded.

8Explain2 marksSound Swap Remove

Each sample of a sound wave is stored as a binary number.

Explain how increasing the bit depth affects the representation of a sound wave.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Each sample is stored using more bits (1) so the amplitude can be recorded more precisely (1)
More different amplitude values can be represented (1) because each extra bit doubles the number of possible values (1)
The height of the wave at each sample point is measured more accurately (1) so the digital wave is closer to the analogue wave (1)
The gap between the true amplitude and the stored value is smaller (1) because there are more values for the sample to be rounded to (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the sound is sampled more often' or 'more samples are taken per second', as these describe the sample rate, not the bit depth.

Do not accept 'the file size increases' on its own as an effect on the representation of the sound.

Example answers and how they were marked

Full marks2/2

Each sample is stored using more bits, so the amplitude at each sample point can be recorded more precisely.

Why: Point (more bits per sample) (1) with linked reason (amplitude recorded more precisely) (1).

Some marks1/2

Each sample is stored using more bits.

Why: Creditworthy point (1) but no linked effect on the accuracy of the representation, so only one mark.

No marks0/2

It takes more samples every second, so the wave is stored in more detail.

Why: Confuses bit depth with sample rate, so no mark is awarded.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

More ways to revise Edexcel GCSE Computer Science (1CP2)