Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

8 questions · 13 marks

Pick again

1Multiple choice1 markCharacter Sets Swap Remove

A new character set must be able to represent 70 different characters.

Identify the minimum number of bits needed to represent each character.

[1 mark]

Mark scheme

B 7 (1)
The only correct answer is B. The correct answer is 7.
A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
D is not correct because 70 is the number of characters needed, not a number of bits

Example answers and how they were marked

Full marks1/1

B 7

Why: The only correct answer: 7 bits give 128 combinations, enough for 70 characters, and it is the smallest number of bits that does (1).

No marks0/1

C 8

Why: Distractor, no credit: a single-tick item has no partial credit, and 8 bits is not the minimum because 7 bits already give 128 combinations, so the scheme's C line gives no mark.

No marks0/1

A 6

Why: Misconception, no credit: 6 bits give only 64 combinations, which cannot represent 70 different characters, so the scheme's A line gives no mark.

2Short recall1 markSound Swap Remove

To store sound in binary, an analogue sound wave is sampled at regular intervals.

Define the term 'sample rate'.

[1 mark]

Mark scheme

Award one mark for:

The number of samples taken per second (1)

Allow captured/recorded for taken.

Allow 'samples per second'.

Allow 'each second' for 'per second'.

Allow Hz/hertz as the unit.

Do not accept the time between samples/sample interval.

Do not accept 'the number of samples' without a per second/time reference.

Do not accept the number of bits used per sample/bit depth.

Example answers and how they were marked

Full marks1/1

The number of samples taken per second.

Why: States samples per second (1); 'per second' is accepted.

No marks0/1

The time between each sample.

Why: Defines sample interval, not sample rate; do not accept.

No marks0/1

The number of bits used for each sample.

Why: Describes bit depth, not sample rate; do not accept.

3Short recall1 markSound Swap Remove

A digital sound representation is created by sampling an analogue sound wave.

State one way the accuracy of this representation can be increased.

[1 mark]

Mark scheme

Award one mark for any of the following:

Increase the sample rate / take more samples per second (1)
Increase the bit depth/sample resolution / use more bits per sample (1)
Decrease the sample interval (1)

Do not accept increase the amplitude/volume

Do not accept decrease the sample rate / increase the sample interval

Example answers and how they were marked

Full marks1/1

Increase the sample rate.

Why: Creditworthy point: increase the sample rate (1).

No marks0/1

Decrease the sample rate.

Why: Near-miss: decreasing the sample rate reduces accuracy, so no mark; the mark scheme's do-not-accept line covers this (0).

No marks0/1

Increase the volume of the sound.

Why: Misconception: loudness/amplitude is not a way to increase sampling accuracy; do not accept increase amplitude/volume (0).

4Short recall2 marksImages Swap Remove

Bitmap images are stored as a grid of pixels.

Define the term pixel.

[2 marks]

Mark scheme

Award one mark for any of the following up to a maximum of two marks:

The smallest element/area of a bitmap image (1)
The smallest identifiable part of an image (1)
Stores/represents a single colour as a binary value (1)
Stores/represents a single colour using a number of bits/colour depth (1)

Allow 'picture element' for element/part in the first two bullets, but not on its own

Allow 'bit depth' for colour depth

Do not accept 'picture element'/'pixel' on its own

Do not accept 'a group of pixels' or 'a dot' on its own; allow 'dot' only when it is described as the smallest element/area of the image

Do not accept 'single colour' on its own for the second mark; it must be linked to a binary value/number of bits

Do not accept 'lots of coloured dots' (it contradicts a single colour)

Example answers and how they were marked

Full marks2/2

The smallest identifiable area of a bitmap image, which has one colour stored as a binary value.

Why: Smallest identifiable area (1) and single colour stored as a binary value (1)

Some marks1/2

The smallest part of a bitmap image, made of one colour.

Why: Smallest part (1); no credit for the second mark because the single colour is not linked to a binary value or number of bits

No marks0/2

A picture element made from lots of coloured dots.

Why: 'Picture element' on its own is not accepted and 'lots of coloured dots' contradicts a single colour

5Describe2 marksSound Swap Remove

Sound is converted into binary using a limited bit depth.

Describe one limitation of representing a sound sample with a limited bit depth.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

Only a fixed number of amplitude values/levels can be represented (1) so the amplitude is rounded to the nearest available value/level (1)
Fewer amplitude values/levels are available to choose from (1) so similar/close amplitudes cannot be stored as different values (1)
The exact amplitude often falls between available values/levels (1) so the stored amplitude is not exact/less accurate (1)

Answers must relate to the number of bits per sample (bit depth) and the amplitude values/levels it can represent.

Do not accept answers about the sample rate, sample interval or the number of samples taken, or that confuse bit depth with the number of samples.

Do not award 'lower quality'/'more detail'/'less detail' unless it is linked to the number of amplitude values/levels.

Do not accept 'the sound cannot be played/stored' without a linked limitation.

Example answers and how they were marked

Full marks2/2

Only a fixed number of amplitude values can be represented, so the amplitude is rounded to the nearest available value and some detail is lost.

Why: Linked points: fixed number of amplitude values (1) and rounding to the nearest available value (1).

Some marks1/2

Only a fixed number of amplitude values can be represented.

Why: Gives the first linked point only (1); it does not develop what this limitation leads to.

No marks0/2

A lower bit depth means fewer samples are taken, so parts of the sound are missed.

Why: Confuses bit depth with the number of samples/sample rate; no creditworthy point about amplitude values is given.

6Explain2 marksImages Swap Remove

Two versions of the same photograph are displayed at the same size on a screen. Version A is 800 × 600 pixels. Version B is 1600 × 1200 pixels.

Explain why Version B can show more detail.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1)
Version B has a higher pixel density (1) so finer detail can be represented (1)
The pixels in Version B are smaller (1) so more detail can be captured in the same space (1)
Version B has a higher resolution (1) because there are more pixels per unit of area (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'more pixels' on its own without saying same area/pixel density/smaller pixels.

Do not accept higher colour depth or more colours.

Example answers and how they were marked

Full marks2/2

Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1).

Why: Linked point (1) and reason (1): more pixels in the same area means smaller pixels and more detail.

Some marks1/2

Version B has more pixels in the same area.

Why: One mark for the point about pixel density; the linked reason about smaller pixels or finer detail is missing.

No marks0/2

Version B has a higher colour depth, so it can display more colours.

Why: Colour depth is not the reason for more detail here; this is the common misconception that colour depth increases resolution.

7Explain2 marksImages Swap Remove

An image uses a colour depth of 2 bits per pixel. The original image contains 12 different colours.

Explain why the image cannot be represented accurately at this colour depth.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Only 4 colours can be represented (1) because 2 bits give 2^2 = 4 possible values (1)
Some of the 12 colours cannot be stored (1) so they are lost/replaced with a colour that can be represented (1)
The image will not match the original exactly (1) because there are fewer colour codes than the number of colours needed (1)
Many colours will share the same binary value (1) so the image will lose colour detail (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'four colours' or '2^2'.

Do not accept 'only two colours' (confusing the number of bits with the number of values) or 'resolution is too low'.

Example answers and how they were marked

Full marks2/2

Only four colours can be represented (1) because two bits give four possible binary values (1).

Why: Linked point (1) and reason (1): 2 bits give 2^2 = 4 colour codes.

Some marks1/2

Only four colours can be represented.

Why: One mark for identifying that four colours can be represented; the linked reason about two bits giving four values is missing.

No marks0/2

Only two colours can be represented because each pixel has two bits.

Why: A common misconception: two bits give four possible values, not two, so no creditworthy point is given.

8Explain2 marksSound Swap Remove

Each sample of a sound wave is stored in binary using a fixed number of bits.

Explain one limitation of representing an analogue sound wave in binary when only a small number of bits is available for each sample.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Only a limited number of different amplitude values can be stored (1) so each sample is rounded to the nearest available value and the digital wave does not match the analogue wave exactly (1)
The wave is continuous but only a limited set of values can be represented (1) so amplitude detail/accuracy is lost (1)
Quiet and loud parts of the sound may be stored as the same value (1) because there are too few values to tell them apart (1)
The range of amplitudes that can be represented is limited (1) so the loudest/quietest parts of the sound cannot be stored accurately (1)

For both marks, the expansion must follow/associate with the statement.

Do not award marks for answers that say the sound cannot be stored or heard at all.

Do not award answers about the number of samples taken/sample rate, as the number of bits limits the amplitude values, not how often the wave is sampled.

Do not accept 'lower quality'/'less accurate'/'less detail' on its own without a link to the amplitude values that can be stored/the number of bit combinations.

Do not accept 'the file size is smaller' without a link to the accuracy or the range of values that can be stored.

Example answers and how they were marked

Full marks2/2

Only a small number of amplitude values can be stored, so each sample is rounded to the nearest value and does not match the original wave exactly.

Why: Point (limited number of amplitude values) (1) with linked reason (samples are rounded and the wave is not exact) (1).

Some marks1/2

Only a small number of amplitude values can be stored.

Why: Creditworthy point (1) but no linked limitation such as rounding or lost accuracy, so only one mark.

No marks0/2

The sound cannot be stored at all because there are not enough bits to hold every sample.

Why: Misconception: the sound can still be stored, just less accurately, so no mark is awarded.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

More ways to revise Edexcel GCSE Computer Science (1CP2)