Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 8 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

Characters are encoded using 7-bit ASCII.

Identify the number of different characters that can be represented using 7-bit ASCII.

[1 mark]
  • A64
  • B127
  • C128
  • D256
Mark scheme
  • C 128 (1)
  • The only correct answer is C. The correct answer is 128.
  • A is not correct because 6 bits give only 64 different combinations
  • B is not correct because 127 is the largest 7-bit value, not the number of characters that 7 bits can represent
  • D is not correct because 256 characters need 8 bits, as used by 8-bit extended ASCII
Example answers and how they were marked
Full marks1/1

C 128

Why: Selects the only correct option (1): 7 bits give 2 to the power of 7, which is 128 different characters.

No marks0/1

D 256

Why: Near miss scoring 0: 256 is the number of characters that 8 bits give in extended ASCII, not 7-bit ASCII.

No marks0/1

B 127

Why: Misconception scoring 0, the off-by-one error the examiners' report describes: 127 is the largest 7-bit value, but 7 bits give 128 different characters.

2Short recall1 markImages Swap Remove

A bitmap image uses one bit per pixel.

State the limitation this places on the number of colours in the image.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • Only two different colours can be represented/stored (1)
  • Each pixel can only be one of two values (1)
  • The image can only be shown in black and white (1)

Allow answers that give the number of colours, e.g. two colours, 2 colours

Allow any pair of two colours, e.g. black and white, black and grey

Do not accept low resolution/poor quality/lower quality

Do not accept only one colour/can only show black

Do not accept 2 bits/2^1 without a statement about the number of colours that can be represented

Example answers and how they were marked
Full marks1/1

Only two colours can be represented, such as black and white.

Why: States that only two different colours can be represented (1)

No marks0/1

The image will have a low resolution.

Why: Confuses colour depth with resolution; low resolution is not accepted

No marks0/1

The image can only show black.

Why: One colour is all a single value can give; the limitation is that only two colours can be represented, so this is not accepted

3Describe2 marksCharacter Sets Swap Remove

A computer uses 7-bit ASCII to represent characters.

The character M has the ASCII code 77. Describe how the character M is represented in the computer.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The denary code 77 is converted to binary (1) to give the 7-bit pattern 1001101 (1)
  • The character M is represented by a unique ASCII code/number (1) that is stored as a 7-bit binary pattern (1)
  • 7 bits are used to store the code for M (1) so 128 different characters can be represented (1)
  • The binary pattern 1001101 is stored in memory (1) using one 7-bit code for each character (1)

Do not accept answers that only state the ASCII code 77, as this is given in the question.

Do not accept 01001101, as this is an 8-bit pattern.

Do not accept ASCII described as a programming language or a method of encryption.

Example answers and how they were marked
Full marks2/2

77 is converted to binary, giving 1001101. This is stored using 7 bits for the character M.

Why: Linked description: converts the code to binary (1) to give the 7-bit pattern 1001101 (1).

Some marks1/2

77 is changed into binary so it can be stored.

Why: Gives the conversion of 77 to binary (1) but does not give the 7-bit pattern 1001101 (0).

No marks0/2

ASCII is a programming language that stores letters as numbers.

Why: Describes ASCII as a programming language, which the mark scheme says is not creditworthy; no linked description of how M is represented.

4Explain2 marksImages Swap Remove

A bitmap image uses a colour depth of 8 bits. Each pixel is stored as a binary value.

Explain how the colour of a pixel is represented in a bitmap image.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each pixel is stored as a binary value/code (1) which represents/maps to a colour (1)
  • The binary value is used to look up a colour in a palette (1) so the pixel can be displayed in that colour (1)
  • A bit pattern is assigned to each colour (1) and each pixel stores the bit pattern for its colour (1)
  • The number of bits per pixel sets how many different colour codes exist (1) so each code can represent a different colour (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'pixels are binary' or 'the image is made of 1s and 0s' without saying a pixel's colour is represented by a binary value.

Do not accept RGB values stored as denary or hexadecimal.

Example answers and how they were marked
Full marks2/2

Each pixel stores a binary value (1); this value is used to look up the pixel's colour in a palette (1).

Why: Linked point (1) and reason (1): a binary value is stored for each pixel and maps to a colour.

Some marks1/2

A bit pattern is assigned to each colour.

Why: One mark for stating that colours have bit patterns; it does not say that each pixel stores the pattern for its colour.

No marks0/2

Each pixel stores the RGB colour as denary numbers between 0 and 255.

Why: Bitmap pixels are stored in binary, not as denary values; this common misconception earns no mark.

5Explain2 marksSound Swap Remove

Analogue sound is converted to binary by sampling at regular intervals.

Explain one reason why increasing the sample rate improves the quality of a digitised sound.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • More samples are taken every second / the sample rate is higher (1) so the digital wave follows the shape of the analogue wave more closely (1)
  • The amplitude is measured more often / at shorter intervals (1) so fewer changes in the sound are missed between measurements (1)
  • The sample interval is shorter (1) so less of the sound wave is lost/goes unrecorded between samples (1)
  • More data points are recorded for the same length of sound (1) so the digital representation is a closer copy of the original sound (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the quality is better/higher' or 'the sound is clearer' as a point on its own without a reason such as more samples or more detail.

Do not accept 'the samples are more accurate' or 'more data is collected' without saying what becomes more accurate or what the extra data records.

Do not accept 'the file size is larger' as a reason for improved quality.

Do not accept answers about using more bits per sample, as these describe bit depth, not the sample rate.

Example answers and how they were marked
Full marks2/2

More samples are taken every second, so the digital representation follows the shape of the analogue wave more closely.

Why: Point (more samples each second) (1) with linked reason (follows the analogue wave more closely) (1).

Some marks1/2

More samples are taken every second.

Why: Creditworthy point (1) but no linked reason about what the extra samples achieve, so stays on one mark.

No marks0/2

Each sample is stored using more bits, so every measurement is more accurate.

Why: This describes bit depth, not the sample rate, so neither mark is awarded.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.