Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 9 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

Characters are encoded using 7-bit ASCII.

Identify the number of different characters that can be represented using 7-bit ASCII.

[1 mark]
  • A64
  • B127
  • C128
  • D256
Mark scheme
  • C 128 (1)
  • The only correct answer is C. The correct answer is 128.
  • A is not correct because 6 bits give only 64 different combinations
  • B is not correct because 127 is the largest 7-bit value, not the number of characters that 7 bits can represent
  • D is not correct because 256 characters need 8 bits, as used by 8-bit extended ASCII
Example answers and how they were marked
Full marks1/1

C 128

Why: Selects the only correct option (1): 7 bits give 2 to the power of 7, which is 128 different characters.

No marks0/1

D 256

Why: Near miss scoring 0: 256 is the number of characters that 8 bits give in extended ASCII, not 7-bit ASCII.

No marks0/1

B 127

Why: Misconception scoring 0, the off-by-one error the examiners' report describes: 127 is the largest 7-bit value, but 7 bits give 128 different characters.

2Explain2 marksCharacter Sets Swap Remove

The ASCII code for the uppercase letter A is 65, which is stored as the 7-bit pattern 1000001.

Explain why the lowercase letter a is stored using a different 7-bit pattern.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The computer needs to tell/distinguish the uppercase A from the lowercase a (1) because each different character has its own unique 7-bit code/pattern (1)
  • A and a are different characters (1) so each needs a different 7-bit pattern to be stored and displayed correctly (1)
  • If A and a had the same 7-bit pattern (1) the computer could not tell which character to display (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'because they are different letters/cases' without saying they need different/unique codes or that the computer must tell them apart.

Do not accept 'because A is a capital letter' on its own.

Do not accept 'because the codes are different numbers' or '65 is not 97' without linking to the need to tell the characters apart or to unique codes.

Example answers and how they were marked
Full marks2/2

Each character needs its own unique code, so the computer can tell that A and a are different characters and display the right one.

Why: Gives the point that the computer must tell A and a apart (1) and links it to the reason that each character needs its own unique code (1).

Some marks1/2

The computer must be able to tell the difference between uppercase and lowercase letters.

Why: Gives the point that the computer must tell the two characters apart (1) but gives no linked reason about unique codes or different 7-bit patterns.

No marks0/2

Because A is a capital letter and a is lowercase.

Why: Only states that the letters are different cases, which the mark scheme says is not accepted without saying they need unique codes or that the computer must tell them apart.

3Explain2 marksImages Swap Remove

A bitmap image uses a colour depth of 8 bits. Each pixel is stored as a binary value.

Explain how the colour of a pixel is represented in a bitmap image.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each pixel is stored as a binary value/code (1) which represents/maps to a colour (1)
  • The binary value is used to look up a colour in a palette (1) so the pixel can be displayed in that colour (1)
  • A bit pattern is assigned to each colour (1) and each pixel stores the bit pattern for its colour (1)
  • The number of bits per pixel sets how many different colour codes exist (1) so each code can represent a different colour (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'pixels are binary' or 'the image is made of 1s and 0s' without saying a pixel's colour is represented by a binary value.

Do not accept RGB values stored as denary or hexadecimal.

Example answers and how they were marked
Full marks2/2

Each pixel stores a binary value (1); this value is used to look up the pixel's colour in a palette (1).

Why: Linked point (1) and reason (1): a binary value is stored for each pixel and maps to a colour.

Some marks1/2

A bit pattern is assigned to each colour.

Why: One mark for stating that colours have bit patterns; it does not say that each pixel stores the pattern for its colour.

No marks0/2

Each pixel stores the RGB colour as denary numbers between 0 and 255.

Why: Bitmap pixels are stored in binary, not as denary values; this common misconception earns no mark.

4Explain2 marksImages Swap Remove

An image uses a colour depth of 2 bits per pixel. The original image contains 12 different colours.

Explain why the image cannot be represented accurately at this colour depth.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only 4 colours can be represented (1) because 2 bits give 2^2 = 4 possible values (1)
  • Some of the 12 colours cannot be stored (1) so they are lost/replaced with a colour that can be represented (1)
  • The image will not match the original exactly (1) because there are fewer colour codes than the number of colours needed (1)
  • Many colours will share the same binary value (1) so the image will lose colour detail (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'four colours' or '2^2'.

Do not accept 'only two colours' (confusing the number of bits with the number of values) or 'resolution is too low'.

Example answers and how they were marked
Full marks2/2

Only four colours can be represented (1) because two bits give four possible binary values (1).

Why: Linked point (1) and reason (1): 2 bits give 2^2 = 4 colour codes.

Some marks1/2

Only four colours can be represented.

Why: One mark for identifying that four colours can be represented; the linked reason about two bits giving four values is missing.

No marks0/2

Only two colours can be represented because each pixel has two bits.

Why: A common misconception: two bits give four possible values, not two, so no creditworthy point is given.

5Explain2 marksSound Swap Remove

Each sample of a sound wave is stored in binary using a fixed number of bits.

Explain one limitation of representing an analogue sound wave in binary when only a small number of bits is available for each sample.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only a limited number of different amplitude values can be stored (1) so each sample is rounded to the nearest available value and the digital wave does not match the analogue wave exactly (1)
  • The wave is continuous but only a limited set of values can be represented (1) so amplitude detail/accuracy is lost (1)
  • Quiet and loud parts of the sound may be stored as the same value (1) because there are too few values to tell them apart (1)
  • The range of amplitudes that can be represented is limited (1) so the loudest/quietest parts of the sound cannot be stored accurately (1)

For both marks, the expansion must follow/associate with the statement.

Do not award marks for answers that say the sound cannot be stored or heard at all.

Do not award answers about the number of samples taken/sample rate, as the number of bits limits the amplitude values, not how often the wave is sampled.

Do not accept 'lower quality'/'less accurate'/'less detail' on its own without a link to the amplitude values that can be stored/the number of bit combinations.

Do not accept 'the file size is smaller' without a link to the accuracy or the range of values that can be stored.

Example answers and how they were marked
Full marks2/2

Only a small number of amplitude values can be stored, so each sample is rounded to the nearest value and does not match the original wave exactly.

Why: Point (limited number of amplitude values) (1) with linked reason (samples are rounded and the wave is not exact) (1).

Some marks1/2

Only a small number of amplitude values can be stored.

Why: Creditworthy point (1) but no linked limitation such as rounding or lost accuracy, so only one mark.

No marks0/2

The sound cannot be stored at all because there are not enough bits to hold every sample.

Why: Misconception: the sound can still be stored, just less accurately, so no mark is awarded.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.