Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 6 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

Characters are encoded using 7-bit ASCII.

Identify the number of different characters that can be represented using 7-bit ASCII.

[1 mark]
  • A64
  • B127
  • C128
  • D256
Mark scheme
  • C 128 (1)
  • The only correct answer is C. The correct answer is 128.
  • A is not correct because 6 bits give only 64 different combinations
  • B is not correct because 127 is the largest 7-bit value, not the number of characters that 7 bits can represent
  • D is not correct because 256 characters need 8 bits, as used by 8-bit extended ASCII
Example answers and how they were marked
Full marks1/1

C 128

Why: Selects the only correct option (1): 7 bits give 2 to the power of 7, which is 128 different characters.

No marks0/1

D 256

Why: Near miss scoring 0: 256 is the number of characters that 8 bits give in extended ASCII, not 7-bit ASCII.

No marks0/1

B 127

Why: Misconception scoring 0, the off-by-one error the examiners' report describes: 127 is the largest 7-bit value, but 7 bits give 128 different characters.

2Short recall2 marksCharacter Sets Swap Remove

ASCII is a character set that uses 7 bits to represent each character.

Give two limitations of 7-bit ASCII when it is used to represent text.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • (Only) 128 different characters can be represented / 7 bits give 2^7 = 128 different codes (1)
  • It cannot represent characters from languages other than English / non-English alphabets, e.g. Greek, Chinese (1)
  • It cannot represent accented characters, e.g. é, ñ (1)
  • It cannot represent symbols or emoji that are not in the ASCII character set (1)

Award a maximum of one mark for the last three bullets, as they are all examples of characters that fall outside the 128 ASCII codes.

Allow 'it can only represent 128 characters, so some characters are missing' for the first bullet.

Do not accept 'it uses 7 bits' / 'it only uses 7 bits' on its own, without saying what this limits.

Do not accept 'it can only store a limited amount of text' / 'it can only store short messages', as 7 bits limits the number of characters available, not the length of a message.

Do not accept 'it can only represent the characters in the ASCII character set', as this repeats the question.

Do not accept 'it is old/out of date' or 'it cannot store numbers'.

Example answers and how they were marked
Full marks2/2

Only 128 different characters can be represented, so it cannot store characters from other languages such as Greek.

Why: 128 character limit (1) and characters from other languages (1); two separate creditworthy limitations.

Some marks1/2

It cannot show accented characters like é and it only uses 7 bits.

Why: Accented characters (1); 'only uses 7 bits' is not qualified, so scores 0.

No marks0/2

It only uses 7 bits, so it can only store a small amount of text.

Why: Scores 0: text length is not a limitation of 7-bit ASCII, and 'only uses 7 bits' is unqualified; both Do not accept lines apply.

3Short recall1 markSound Swap Remove

A digital sound representation is created by sampling an analogue sound wave.

State one way the accuracy of this representation can be increased.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • Increase the sample rate / take more samples per second (1)
  • Increase the bit depth/sample resolution / use more bits per sample (1)
  • Decrease the sample interval (1)

Do not accept increase the amplitude/volume

Do not accept decrease the sample rate / increase the sample interval

Example answers and how they were marked
Full marks1/1

Increase the sample rate.

Why: Creditworthy point: increase the sample rate (1).

No marks0/1

Decrease the sample rate.

Why: Near-miss: decreasing the sample rate reduces accuracy, so no mark; the mark scheme's do-not-accept line covers this (0).

No marks0/1

Increase the volume of the sound.

Why: Misconception: loudness/amplitude is not a way to increase sampling accuracy; do not accept increase amplitude/volume (0).

4Explain2 marksCharacter Sets Swap Remove

A computer system uses a 4-bit code to represent the characters typed on its keyboard.

Explain one limitation of using 4 bits to represent characters.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only 16 different characters can be represented (1) so there are not enough characters codes for every letter of the alphabet (1)
  • 4 bits give only 16 different combinations (1) which is not enough for the uppercase letters, lowercase letters, digits and symbols on a keyboard (1)
  • More than 16 characters are needed on a keyboard (1) so some letters, digits or symbols cannot be represented (1)
  • The number of character codes available is limited to 16 (1) because 4 bits give 2 to the power of 4 combinations (1)

For both marks, the expansion must follow/associate with the statement.

Calculating that 4 bits give 2 to the power of 4 = 16 combinations can earn either the point or the linked reason, provided the other half of the answer says what this means (too few characters/codes).

Allow an expansion that names only the letters of the alphabet, e.g. there are not enough character codes for the 26 letters (1).

Do not accept '4 bits can only store 4 characters' (the number of bits is not the number of characters).

Do not accept 'it can only store 16 bits' (16 is the number of character codes/combinations, not the number of bits).

Do not accept 'not enough memory/storage' (the limitation is the number of character codes, not the amount of storage).

Do not accept 'it is limited/smaller' without saying how many characters/codes are available or what cannot be represented.

Example answers and how they were marked
Full marks2/2

Only 16 different characters can be represented, so there are not enough character codes for all 26 letters.

Why: Gives the point that only 16 characters can be represented (1) and links it to the reason that this is fewer than the letters needed (1).

Some marks1/2

Only 16 different characters can be represented.

Why: Gives the point that only 16 characters can be represented (1) but does not explain what cannot be represented.

No marks0/2

It can only store 4 characters because there are 4 bits.

Why: Misconception that the number of bits equals the number of characters, which the mark scheme says not to accept; no creditworthy point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.