Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 17 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

Characters are encoded using 7-bit ASCII.

Identify the number of different characters that can be represented using 7-bit ASCII.

[1 mark]
  • A64
  • B127
  • C128
  • D256
Mark scheme
  • C 128 (1)
  • The only correct answer is C. The correct answer is 128.
  • A is not correct because 6 bits give only 64 different combinations
  • B is not correct because 127 is the largest 7-bit value, not the number of characters that 7 bits can represent
  • D is not correct because 256 characters need 8 bits, as used by 8-bit extended ASCII
Example answers and how they were marked
Full marks1/1

C 128

Why: Selects the only correct option (1): 7 bits give 2 to the power of 7, which is 128 different characters.

No marks0/1

D 256

Why: Near miss scoring 0: 256 is the number of characters that 8 bits give in extended ASCII, not 7-bit ASCII.

No marks0/1

B 127

Why: Misconception scoring 0, the off-by-one error the examiners' report describes: 127 is the largest 7-bit value, but 7 bits give 128 different characters.

2Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

3Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a file/files smaller (1) so less storage space is needed on the disk (1)
  • Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
  • Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
  • Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked
Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

4Discuss6 marksFile Management Swap Remove

A student keeps school work and photographs on a laptop. The laptop's storage is almost full. The student uses the operating system's file management.

Discuss the file management tasks the operating system provides that the student can use to manage these files.

Your answer should include:

  • saving files
  • deleting files
  • copying files
[6 marks]
Mark scheme

Indicative content

Saving files

  • When saving, the operating system lets the student choose the folder and the file name, so new work goes into the correct subject folder instead of the root.
  • The operating system warns the student before a file with the same name is overwritten, so an earlier version of an essay is not lost by accident.
  • The operating system writes the file into free space on the laptop and records where it is, so the student can open it again later.

Deleting files

  • The operating system lets the student delete files that are no longer needed, which frees space so new photographs can be saved.
  • Deleted files are usually moved to the recycle bin first, so a file removed by mistake can be restored.
  • Emptying the recycle bin removes the data permanently and releases the space for other files.

Copying files

  • The operating system lets the student copy files to a USB flash drive, so there is a second copy if the laptop is lost or damaged.
  • Copying leaves the original file in place, so the student can carry on working on the laptop's copy.
  • A whole folder can be copied in one action, including its subfolders, which is quicker than copying each file separately.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover saving, deleting and copying.

Do not accept answers about the processor or defragmentation as file management tasks.

Example answers and how they were marked
Full marks6/6

When the student saves a file, the operating system lets them pick the folder and name, and it warns before a file with the same name is overwritten, so an earlier essay is not lost. Because the laptop is nearly full, the student can delete photographs they no longer need; these go to the recycle bin at first, so a file removed by mistake can be restored, and emptying the bin releases the space for good. The student can also copy their school work to a USB flash drive, which leaves the original on the laptop and gives a backup if the laptop is damaged.

Why: Saving (choice of folder and name, overwrite warning), deleting (recycle bin, restoring, releasing space) and copying (backup on a USB drive, original kept) are all explained and tied to the student's full laptop.

Some marks3/6

The student can save files into folders so they know where they are. They can delete files they do not need to free up space. They can copy files onto a memory stick.

Why: Three tasks are named with a reason for deleting, but saving and copying are not developed and there is little linkage between the points, so Level 2.

No marks0/6

The operating system saves files automatically and deletes old files when the RAM is full. The processor copies the files to the hard disk.

Why: No creditworthy point: files are not saved automatically, RAM filling does not trigger file deletion, and copying is not done by the processor. Typical confusion between file management and memory or processor management.

5Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

  • machine independence
  • processor specificity
  • how the code is translated for each type of computer.
[6 marks]
Mark scheme

Indicative content

Machine independence

  • A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
  • The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
  • Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

  • A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
  • Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
  • Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
  • Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

  • High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
  • Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
  • Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
  • Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
  • Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.
Example answers and how they were marked
Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.