Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

5 questions · 17 marks

Pick again

1Multiple choice1 markCharacter Sets Swap Remove

ASCII is a character set used for representing text.

Identify the number of bits used to encode each character in ASCII.

[1 mark]

Mark scheme

B 7 (1)
The only correct answer is B. The correct answer is 7 bits.
A is not correct because 6 bits give only 64 different characters
C is not correct because 8 bits are used by extended ASCII to give 256 characters
D is not correct because 16 bits give 65 536 different characters, which is far more than the 128 in ASCII

Example answers and how they were marked

Full marks1/1

B 7

Why: B is the only correct answer: each ASCII character is encoded using 7 bits (1).

No marks0/1

C 8

Why: Near miss scoring 0: 8 bits is extended ASCII, and the scheme's C line says extended ASCII, not ASCII, is not the answer.

No marks0/1

A 6

Why: Misconception scoring 0: 6 bits give only 64 different characters, so it cannot be ASCII.

2Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]

Mark scheme

Award one mark for any of the following up to a maximum of two marks:

Program instructions are stored in main memory/RAM (1)
The data used by the program is stored in main memory/RAM (1)
The CPU fetches/reads instructions from main memory to execute them (1)
The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked

Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

3Explain2 marksProtocols & Layers Swap Remove

A bank's website can use HTTP or HTTPS.

Explain one benefit to a customer of the bank's website using HTTPS.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Data is encrypted/scrambled (1) so it cannot be read/understood if it is intercepted (1)
The customer's bank/personal details are kept secure/private (1) because the data is encrypted/scrambled during transmission (1)
The customer's login details/password cannot be read by an eavesdropper (1) because HTTPS encrypts/scrambles the data sent to and from the web server (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'scrambled' as an alternative to 'encrypted'.

Do not accept 'it is more secure/safe' or 'the data is secure' on its own, without saying how it is made secure (e.g. encryption/scrambling).

Do not accept faster loading/speed, or claims that HTTPS stops viruses or always proves the website is genuine.

Example answers and how they were marked

Full marks2/2

The data is encrypted (1) so anyone intercepting it cannot read the customer's bank details (1).

Why: Linked point (1) and reason (1): encryption means intercepted data cannot be read.

Some marks1/2

The data is encrypted (1) so the website is secure.

Why: Point (1) for encryption, but 'secure' on its own is a near-miss that the mark scheme does not credit as the linked reason; it must say why, e.g. that intercepted data cannot be read.

No marks0/2

HTTPS is faster than HTTP (0) so the customer can log in more quickly.

Why: Speed is not a benefit of HTTPS and is named in a 'Do not accept' line, so no creditworthy point is given.

4Discuss6 marksPurpose & Function of Operating Systems Swap Remove

A home computer is used to stream music, edit a video and download files at the same time.

Discuss how the operating system manages the processes running on the computer.

Your answer should include:

how the CPU is shared between processes
the states a process can be in
how the operating system responds when a process needs attention

[6 marks]

Mark scheme

Indicative content

How the CPU is shared between processes

The operating system uses multitasking to give each process a short time slice on the CPU, so the music, video editor and download appear to run at the same time.
The operating system decides which ready process will run next, so one program cannot keep the CPU to itself.
The operating system can stop a running process and move it back to ready when its time slice ends, so all processes make progress.

The states a process can be in

When a program is opened, the operating system creates a process and moves its instructions into RAM so it is ready.
The operating system moves a ready process to running when the CPU is free.
A running process becomes blocked when it is waiting for input or data, such as the download waiting for data to arrive.
When the process finishes, the operating system terminates it and releases the resources it was using.

How the operating system responds when a process needs attention

An interrupt is a signal to the CPU that needs immediate attention, so the operating system suspends the current process and runs the interrupt handler.
A hardware interrupt could be a printer out of paper, and a software interrupt could be an error in a program.
After the interrupt has been handled, the operating system can return the interrupted process to the CPU.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

Level 3 responses must cover at least two of scheduling, process states and interrupts.
A response that only states that the OS 'manages processes' or gives a program a turn, without expansion, is limited to Level 1.

Example answers and how they were marked

Full marks6/6

The OS uses multitasking to share the CPU. It gives each process, such as the music player and the video editor, a small time slice so they appear to run at the same time. It decides which ready process is next and how long it runs. When the video editor is opened, the OS creates a process and moves its instructions into RAM so it is ready; when the CPU is free it moves it to running. If the download is waiting for data, the OS marks it blocked so the CPU is not wasted. If the printer runs out of paper, a hardware interrupt tells the CPU to stop and run the interrupt handler; afterwards the OS returns to the process.

Why: Covers scheduling with time slices, process states (ready, running, blocked) and interrupts, with sustained application to the music, video editor and download. Level 3.

Some marks4/6

The operating system uses multitasking so the music and video editor can run at the same time. It gives each program a small amount of time on the CPU. When a program is opened it creates a process and puts it in RAM. If a process is waiting for input it is blocked.

Why: Covers CPU sharing and process states, with some application, but says nothing about interrupts. Level 2.

Some marks1/6

The operating system manages processes by giving each program a turn on the CPU. This stops the computer crashing when too many programs are open.

Why: Gives only a basic, undeveloped point about giving each program a turn, with no linkage or application. Level 1.

5Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

machine independence
processor specificity
how the code is translated for each type of computer.

[6 marks]

Mark scheme

Indicative content

Machine independence

A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.

Example answers and how they were marked

Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

More ways to revise Edexcel GCSE Computer Science (1CP2)