Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 10 marks

Pick again
Print
1Multiple choice1 markCharacter Sets Swap Remove

ASCII is a character set used for representing text.

Identify the number of bits used to encode each character in ASCII.

[1 mark]
  • A6
  • B7
  • C8
  • D16
Mark scheme
  • B 7 (1)
  • The only correct answer is B. The correct answer is 7 bits.
  • A is not correct because 6 bits give only 64 different characters
  • C is not correct because 8 bits are used by extended ASCII to give 256 characters
  • D is not correct because 16 bits give 65 536 different characters, which is far more than the 128 in ASCII
Example answers and how they were marked
Full marks1/1

B 7

Why: B is the only correct answer: each ASCII character is encoded using 7 bits (1).

No marks0/1

C 8

Why: Near miss scoring 0: 8 bits is extended ASCII, and the scheme's C line says extended ASCII, not ASCII, is not the answer.

No marks0/1

A 6

Why: Misconception scoring 0: 6 bits give only 64 different characters, so it cannot be ASCII.

2Short recall1 markEmbedded Systems Swap Remove

A ticket machine only performs the tasks needed to sell tickets.

State the name of this type of computer system.

[1 mark]
Mark scheme

Award one mark for:

  • Embedded (computer) system (1)

Allow embedded computer/embedded device.

Allow dedicated (computer) system.

Do not accept microcontroller/microprocessor controlled system.

Do not accept general purpose computer/PC/laptop.

Example answers and how they were marked
Full marks1/1

An embedded system.

Why: Correct name of the type of computer system (1).

No marks0/1

A microcontroller.

Why: Near miss: a microcontroller is a component inside an embedded system, not the name of the type of system, so the 'Do not accept' line applies and it scores nothing.

No marks0/1

A general purpose computer.

Why: Misconception: the stem states the system only performs the tasks needed to sell tickets, so 'Do not accept general purpose computer' applies and it scores nothing.

3Explain2 marksProtocols & Layers Swap Remove

The TCP/IP model has four layers.

Explain one function of the transport layer when a file is sent over a network.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Splits the data/file into packets (1) so each packet can be sent separately across the network (1)
  • Adds a packet/sequence number to each packet (1) so the packets can be put back into the correct order at the destination (1)
  • Detects lost/missing packets (1) so they can be requested/resent (1)
  • Creates a connection between the two computers/hosts (1) before the file is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'segments' for 'packets' (TCP divides the data into segments, which become packets at the internet layer).

Do not accept 'sends the data/file' on its own without saying what the transport layer does to the data.

Do not accept naming TCP or a port number on its own without expansion.

Do not accept routing/addressing packets using IP addresses, which is the internet layer.

Example answers and how they were marked
Full marks2/2

The transport layer splits the data into packets (1) so each packet can be sent separately across the network (1).

Why: Linked point (1) and reason (1): splitting into packets lets each one be sent separately.

Some marks1/2

It splits the data into packets (1).

Why: Point (1) identified, but no linked reason given, so only the first mark is awarded.

No marks0/2

It routes the packets using IP addresses (0) so they reach the right destination.

Why: Routing using IP addresses is the internet layer, not the transport layer, so no credit is given.

4Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

  • machine independence
  • processor specificity
  • how the code is translated for each type of computer.
[6 marks]
Mark scheme

Indicative content

Machine independence

  • A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
  • The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
  • Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

  • A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
  • Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
  • Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
  • Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

  • High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
  • Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
  • Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
  • Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
  • Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.
Example answers and how they were marked
Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.