Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Describe2 marksStored Program Computers Swap Remove

The control unit (CU) is a component inside the CPU.

Describe the role of the control unit in the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Decodes each (fetched) instruction (1) to work out which operation is needed / which components should carry it out (1)
  • Coordinates/directs the other components (1) by sending control signals along the control bus (1)
  • Fetches the next instruction (1) by sending its address to main memory along the address bus (1)
  • Sends a read/write control signal to main memory (1) so that the instruction or data is transferred during the fetch/execute stage (1)

Do not accept answers about synchronising the CPU or timing the cycles (that is the role of the clock).

Do not accept answers about carrying out arithmetic or logical operations (that is the ALU).

Do not accept answers about holding data or the results of instructions (that is registers/main memory).

Do not accept generic answers that only say the CU controls the CPU or processes instructions, with no linked development.

Only award one mark for a response that only repeats that the CU sends control signals; the second mark needs a linked outcome such as coordination, a memory read/write, or fetching an instruction.

Do not accept 'during the decode stage' as the development for the decoding point, as it restates the question.

Example answers and how they were marked
Full marks2/2

It decodes the instruction that has been fetched so that it knows which operation the CPU must carry out and which components should do it.

Why: Decoding named with the acceptable wording 'each (fetched) instruction' (1), plus the linked development that this identifies the operation and components (1).

Some marks1/2

It decodes each instruction during the decode stage of the cycle.

Why: Earns (1) for decoding the instruction. 'During the decode stage' restates the question and is not accepted as a development, so the second mark is not earned.

No marks0/2

It carries out the calculations and comparisons when the instruction is executed.

Why: Calculations and comparisons are the ALU's role, which the 'Do not accept' line rules out, so no mark is earned.

2Describe2 marksStored Program Computers Swap Remove

A computer is based on the von Neumann stored program concept.

Describe how the CPU uses main memory (RAM) during the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The program's instructions (and the data it uses) are held in main memory/RAM (1) so the CPU fetches both the instructions and the data from that one memory (1)
  • The CPU fetches the next instruction from main memory/RAM (1) using the address of the memory location that holds it (1)
  • The CPU reads/fetches data from main memory/RAM (1) when an instruction needs it and writes the result back to main memory/RAM (1)
  • The program's instructions are held in main memory/RAM while the program runs (1) and the CPU fetches them one at a time/one after another to be decoded and executed (1)

Allow 'memory' for main memory/RAM.

Allow 'gets' for fetches/reads.

For both marks, the development must say what the CPU does with the contents of main memory (fetches/reads/writes), not just that main memory is used.

Do not accept answers about the program being stored in secondary storage, such as on a hard drive, or about it being loaded from there.

Do not accept benefits such as the computer running faster or being easier for the user.

Do not accept naming CPU components (control unit, arithmetic logic unit, registers) or buses on their own, without saying what is stored or fetched.

Do not accept 'the computer stores data' on its own, without a link to the instructions of a program.

Example answers and how they were marked
Full marks2/2

The program's instructions and the data it uses are both held in the same main memory (RAM), so the CPU can fetch the instructions and the data it needs from that one memory.

Why: Linked point (1) that instructions and data are stored together in main memory, with the development (1) that the CPU fetches both from the same memory.

Some marks1/2

The CPU fetches the instructions from main memory so that they are processed more quickly.

Why: The first point earns (1) for the CPU fetching instructions from main memory. The second statement is a benefit (speed), which the 'Do not accept benefits' line rules out, so it earns nothing.

No marks0/2

The control unit decodes each instruction and the ALU carries out the calculations.

Why: Both statements name CPU components without saying what is stored, fetched or written, which the mark scheme tells examiners not to accept, so neither earns a mark.

3Explain2 marksEmbedded Systems Swap Remove

An engine control unit (ECU) in a car is an embedded system.

Explain one benefit of using an embedded system for the engine control unit instead of a general purpose computer.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
  • (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
  • (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
  • (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
  • (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Example answers and how they were marked
Full marks2/2

It is more reliable than a general purpose computer because it only runs the one program so it will not crash and stop the engine working.

Why: Benefit stated (1) with a linked reason (1); the reason shows why only running one program makes it reliable.

Some marks1/2

It is more reliable because it is part of the car's engine.

Why: Only the benefit earns a mark (1); being part of the car is a location, not a linked reason why it is reliable.

No marks0/2

It is faster than a general purpose computer because it is embedded in the engine.

Why: Misconception that an embedded system is faster; embedded systems have limited processing resources, so neither point nor reason is creditworthy.

4Discuss6 marksPrimary Memory Swap Remove

An employee is writing a report on a laptop. There is a power cut and the laptop turns off. When power is restored, the employee cannot find the report file.

Discuss the role of RAM in this situation.

Your answer should include:

  • why the report was lost
  • the difference between RAM and secondary storage
  • how the employee could prevent this in future.
[6 marks]
Mark scheme

Indicative content

Why the report was lost

  • The report was being created and edited in RAM, which is volatile.
  • Volatile memory loses its contents when the power supply is removed.
  • The power cut removed the power, so the data in RAM was lost.
  • The report had not been saved to secondary storage before the power cut.
  • Only data that had been saved to secondary storage would remain after the power cut.

The difference between RAM and secondary storage

  • RAM is volatile and holds data temporarily while the computer is on.
  • Secondary storage is non-volatile and keeps data permanently when the power is off.
  • RAM is directly accessible by the CPU and is much faster than secondary storage.
  • Secondary storage has a larger capacity and is cheaper per gigabyte than RAM.
  • RAM holds the programs and data currently in use; secondary storage holds files for long-term storage.

How the employee could prevent this in future

  • The employee should save the report regularly to secondary storage, such as the hard drive or a USB flash drive.
  • The employee could enable autosave or autosave/recovery features in the word processor.
  • The employee could use cloud storage that saves changes automatically.
  • The employee could use an uninterruptible power supply (UPS) or battery to keep the laptop on during a power cut.
  • The employee should not rely on RAM to keep work permanently.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must explain that RAM is volatile and contrast this with non-volatile secondary storage.
  • Do not award marks for stating that the report was lost from secondary storage unless it had been saved there.
Example answers and how they were marked
Full marks6/6

The report was lost because it was being held in RAM, which is volatile memory. RAM only keeps its contents while the computer has power. When the power cut happened, the laptop turned off and everything in RAM was lost, including the unsaved report. RAM is different from secondary storage because secondary storage is non-volatile and keeps data permanently even when the power is off. For example, the hard drive would still contain the report if it had been saved. RAM is also much faster than secondary storage and is used for programs and data currently in use. To prevent this in future, the employee should save the report regularly to the hard drive or use autosave. They could also save to cloud storage, which saves automatically, or use a UPS to keep the laptop running during a power cut.

Why: Comprehensive understanding of RAM volatility, clear contrast with non-volatile secondary storage, and well-linked prevention methods applied to the employee's situation.

Some marks4/6

The report was lost because it was in RAM. RAM is temporary memory and it loses data when the power goes off. Secondary storage is permanent, so if the employee had saved the report it would still be there. RAM is faster than secondary storage. To prevent it, they should save their work.

Why: Adequate understanding shown through the volatility of RAM and the difference from permanent secondary storage, but the answer lacks detail about why the report was specifically lost and gives only a brief prevention method.

No marks0/6

The report was lost from the hard drive because the power cut erased it. RAM is permanent storage, so the report should have been saved there. The employee should buy more RAM to stop this happening again.

Why: No creditworthy points. The answer wrongly says the report was lost from the hard drive and that RAM is permanent storage, and it suggests more RAM will prevent power-loss data loss. These are misconceptions.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.