Edexcel GCSE Computer Science (1CP2) Exam Questions

Award up to two marks for a linked description such as:

• The program's instructions (and the data it uses) are held in main memory/RAM (1) so the CPU fetches both the instructions and the data from that one memory (1)
• The CPU fetches the next instruction from main memory/RAM (1) using the address of the memory location that holds it (1)
• The CPU reads/fetches data from main memory/RAM (1) when an instruction needs it and writes the result back to main memory/RAM (1)
• The program's instructions are held in main memory/RAM while the program runs (1) and the CPU fetches them one at a time/one after another to be decoded and executed (1)

Allow 'memory' for main memory/RAM.

Allow 'gets' for fetches/reads.

For both marks, the development must say what the CPU does with the contents of main memory (fetches/reads/writes), not just that main memory is used.

Do not accept answers about the program being stored in secondary storage, such as on a hard drive, or about it being loaded from there.

Do not accept benefits such as the computer running faster or being easier for the user.

Do not accept naming CPU components (control unit, arithmetic logic unit, registers) or buses on their own, without saying what is stored or fetched.

Do not accept 'the computer stores data' on its own, without a link to the instructions of a program.

Award up to two marks for a linked description such as:

• Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
• A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
• Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
• The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Indicative content

Magnetic storage

• A magnetic hard disk drive stores data on a magnetic platter that spins, with a read/write head on an actuator arm that moves over its surface.
• The read/write head magnetises small areas of the platter to represent binary 1s and 0s, and reads the magnetic pattern back when the data is needed.
• The data is held on concentric tracks that are divided into sectors. (Accept data being stored magnetically without further detail, but a vague 'it uses a magnet' is not enough for this point.)
• The platter and the read/write head are sealed inside the drive unit because of the precision needed.

Solid state storage

• A solid state drive stores data in flash memory chips and has no moving parts.
• A large electric current forces electrons through a barrier and traps them in a floating gate; the presence or absence of this trapped charge represents a 1 or a 0. (Accept either convention for which charge state represents a 1 and which represents a 0.)
• The charged cells are detected to read the data back. (Accept: the data can be erased and rewritten by applying a new current.)
• As there is no disk to spin to the correct position and no arm to move, data can be read from and written to solid state storage very quickly.

Suitability for the company's video files

• A magnetic HDD has a very large capacity and is generally cheaper per gigabyte than an SSD of the same capacity, which suits a company that stores many large video files.
• An SSD has very fast read/write speeds, so the company's large video files open and save quickly while they are being edited.
• An SSD has no moving parts, so it is more durable if the company's computers are carried between filming locations.
• A magnetic HDD could store finished videos as an archive and an SSD could hold the project being edited, so the company gets high speed while editing and low-cost capacity for storage.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 answers must give accurate accounts of how data is stored on both magnetic and solid state storage and sustain a line of reasoning that applies at least one of them to the company's video files. An answer that covers only one storage type, or that describes both types without any application to the company, cannot go above Level 2.
• Do not accept descriptions of optical storage (pits and lands, a laser) as magnetic or solid state storage, and do not accept 'magnetic storage uses a laser' or 'solid state storage is volatile' or 'solid state storage is RAM'.

Indicative content

What an embedded system is

• An embedded system is a computer system that forms part of a larger device, such as the fitness tracker.
• It performs a single, dedicated or specific task rather than being a general purpose computer.
• It is often built around a microcontroller, which contains the processor, RAM and ROM on a single chip.
• Its software is held in ROM so the tracker can run its program as soon as it is switched on.

Functions in the tracker

• Monitoring the heart rate using a sensor and processing the readings so that they can be displayed on the screen.
• Counting steps using an accelerometer and using the count to calculate the distance walked or the calories burned.
• Tracking sleep by monitoring the wearer's movement during the night.
• Controlling the touch screen so that the user can move between displays.
• Managing the battery, for example stopping the charging when the battery is full and saving power when the tracker is idle.
• Sending the collected data to a smartphone using Bluetooth so that it can be viewed in an app. Accept any other specific function of the fitness tracker that an embedded system could control.

Why an embedded system is suitable for this device

• It has low power consumption, so the battery lasts longer between charges, which matters for a device that is worn all day.
• It is small and light, so it can be fitted into a wristband.
• Its dedicated function means it does not need a full operating system, so it is reliable and does not need restarting.
• The program is small and stored in ROM, so the tracker needs only a small amount of memory.
• It can be optimised for its specific tasks, so it responds quickly to the readings from its sensors.
• The low cost per unit keeps the tracker affordable for the customer.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover what an embedded system is, the functions it performs in the tracker and why it is suitable for the tracker.
• Do not award installing new software/apps, functions the tracker does not perform (such as playing music) or 'it is like a phone'.