Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

4 questions · 11 marks

Pick again

1Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]

AAddress bus
BControl bus
CData bus
DSystem bus

Mark scheme

A Address bus (1)
The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
B is not correct because the control bus carries control signals in both directions between the CPU and other components
C is not correct because the data bus carries data in both directions between the CPU and main memory
D is not correct because the system bus is the collection of all three buses

Example answers and how they were marked

Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

2Short recall2 marksEmbedded Systems Swap Remove

A digital camera contains an embedded system.

Give two functions that the embedded system performs in the digital camera.

[2 marks]

Mark scheme

Award one mark for any of the following up to a maximum of two marks:

Focus the lens/autofocus (1)
Control the shutter (speed) (1)
Control the flash/decide when the flash is needed (1)
Measure the light level to set the exposure/the aperture (1)
Stabilise the lens/image stabilisation (1)
Zoom the lens in and out (1)
Detect a face/smile (1)

Do not accept 'take a photograph'/'take a picture'/'capture an image', as taking photographs is the function of the camera, which is given in the question.

Do not accept 'press the button' as this is an action of the user, not a function performed by the embedded system.

Do not accept vague answers such as 'use the camera', 'turn the camera on and off' or 'make the camera work', which do not name a function that the embedded system performs.

Example answers and how they were marked

Full marks2/2

It focuses the lens and decides when the flash should fire.

Why: Focus the lens (1) and control the flash (1).

Some marks1/2

It controls the zoom and takes a picture when the button is pressed.

Why: Zoom the lens credited (1); 'takes a picture' is not accepted because taking photographs is the function of the camera, which is given in the question, and 'press the button' is the user's action, not a function of the embedded system.

No marks0/2

It takes a picture when the button is pressed and it makes the camera work.

Why: No mark: 'takes a picture' repeats the camera's function given in the question, 'press the button' is an action of the user, and 'makes the camera work' is too vague to name a function.

3Explain2 marksTopologies Swap Remove

A small office uses a star topology with a central switch.

Explain one benefit of using a star topology in the office.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

If one cable/device fails, the other devices on the network are not affected (1) because each device has its own separate connection to the central switch (1)
Faults are easier to find (1) because each device has its own cable, so the faulty cable can be checked on its own (1)
Data is sent only to the intended device (1) because the central switch forwards the data only to the device it is addressed to (1)
Data transfer is fast (1) because each device has its own cable, so devices do not share the cable with each other (1)
New devices can be added easily (1) because a device only needs one cable to a spare port on the central switch (1)

For both marks, the expansion must follow/associate with the statement.

A benefit stated on its own can earn one mark; the second mark is only for a linked reason.

Accept 'switch' for the central device.

Do not accept 'server' or 'hub' for the central device.

Do not accept 'hub', as a hub sends data to all devices, not only to the intended device.

Do not award a mark for responses that say only that the network is better/more reliable/easier without naming a benefit.

Example answers and how they were marked

Full marks2/2

If one of the cables breaks, the other devices can still communicate because each device has its own separate cable connected to the central switch.

Why: Linked benefit (1) and reason (1): a single cable failure does not affect the other devices because each device has a separate connection to the switch.

Some marks1/2

If one cable breaks, the other devices are not affected.

Why: A benefit is stated on its own (1), but there is no linked reason about each device having its own connection to the central switch, so the second mark is not awarded.

No marks0/2

It is better than a bus topology because every device connects to the central server.

Why: No credit: 'better' does not name a benefit, so no first mark, and 'server' is not accepted as the central device, so there is no linked reason either.

4Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

how each translator deals with a syntax error
how much of the program is translated at a time
how this affects the student's testing.

[6 marks]

Mark scheme

Indicative content

How each translator deals with a syntax error

An interpreter stops as soon as it finds a syntax error and displays an error message.
With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

An interpreter translates one line at a time and executes each line immediately.
A compiler translates the whole program in one go before any of it is run.
A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

An interpreter suits this student because the program can be run straight away after each small change.
The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
The student should use an interpreter while testing, and compile the finished program once it works.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked

Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

4.2 Network security

5.1 Environmental

5.2 Ethical and legal

More ways to revise Edexcel GCSE Computer Science (1CP2)