Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 544 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 8 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]
  • AAddress bus
  • BControl bus
  • CData bus
  • DSystem bus
Mark scheme
  • A Address bus (1)
  • The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
  • B is not correct because the control bus carries control signals in both directions between the CPU and other components
  • C is not correct because the data bus carries data in both directions between the CPU and main memory
  • D is not correct because the system bus is the collection of all three buses
Example answers and how they were marked
Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

2Multiple choice1 markCharacter Sets Swap Remove

ASCII is a character set used for representing text.

Identify the number of bits used to encode each character in ASCII.

[1 mark]
  • A6
  • B7
  • C8
  • D16
Mark scheme
  • B 7 (1)
  • The only correct answer is B. The correct answer is 7 bits.
  • A is not correct because 6 bits give only 64 different characters
  • C is not correct because 8 bits are used by extended ASCII to give 256 characters
  • D is not correct because 16 bits give 65 536 different characters, which is far more than the 128 in ASCII
Example answers and how they were marked
Full marks1/1

B 7

Why: B is the only correct answer: each ASCII character is encoded using 7 bits (1).

No marks0/1

C 8

Why: Near miss scoring 0: 8 bits is extended ASCII, and the scheme's C line says extended ASCII, not ASCII, is not the answer.

No marks0/1

A 6

Why: Misconception scoring 0: 6 bits give only 64 different characters, so it cannot be ASCII.

3Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

4Describe2 marksUtility Software Swap Remove

A computer can lose power while a file is being saved.

Describe what file repair software does.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Attempts to repair/rebuild the corrupted file (1) so that it can be opened by its program again (1)
  • Recovers/retrieves the parts of the file that can still be read (1) so that the user does not lose all of the data in the file (1)
  • Reconstructs the file from data held in other parts of the disk (1) because part of the file/the disk is corrupted (1)
  • Saves a new/repaired copy of the file (1) as some of the data in it may not be recoverable (1)

Do not accept 'it repairs the file' on its own, as this repeats the question.

Do not accept responses about restoring a backup/previous version of the file, as this is backup software.

Do not accept responses about scanning for or removing malware.

Example answers and how they were marked
Full marks2/2

It recovers the parts of the file that can still be read (1) so that the user does not lose everything that was saved in it (1).

Why: The point (1) and a linked development giving the effect (1).

Some marks1/2

It rebuilds the damaged file from other parts of the disk.

Why: A valid point is made (1) but there is no development of what this achieves, so the second mark is not awarded.

No marks0/2

It restores the last backup of the file so the user gets the data back.

Why: This describes backup software, which the mark scheme does not accept for this question.

5Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive (1) because they follow the same set of rules for communication (1).

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format (1).

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster (0) because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 30
Network Security Risks 18 questions Preventing Network Security Risks 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.