Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

9 questions · 19 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]
  • AAddress bus
  • BControl bus
  • CData bus
  • DSystem bus
Mark scheme
  • A Address bus (1)
  • The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
  • B is not correct because the control bus carries control signals in both directions between the CPU and other components
  • C is not correct because the data bus carries data in both directions between the CPU and main memory
  • D is not correct because the system bus is the collection of all three buses
Example answers and how they were marked
Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

2Multiple choice1 markCharacter Sets Swap Remove

ASCII is a character set used for representing text.

Identify the number of bits used to encode each character in ASCII.

[1 mark]
  • A6
  • B7
  • C8
  • D16
Mark scheme
  • B 7 (1)
  • The only correct answer is B. The correct answer is 7 bits.
  • A is not correct because 6 bits give only 64 different characters
  • C is not correct because 8 bits are used by extended ASCII to give 256 characters
  • D is not correct because 16 bits give 65 536 different characters, which is far more than the 128 in ASCII
Example answers and how they were marked
Full marks1/1

B 7

Why: B is the only correct answer: each ASCII character is encoded using 7 bits (1).

No marks0/1

C 8

Why: Near miss scoring 0: 8 bits is extended ASCII, and the scheme's C line says extended ASCII, not ASCII, is not the answer.

No marks0/1

A 6

Why: Misconception scoring 0: 6 bits give only 64 different characters, so it cannot be ASCII.

3Short recall1 markSecondary Memory Swap Remove

Data is stored on optical discs as pits and lands.

Name the component in an optical disc drive that reads this data.

[1 mark]
Mark scheme

Award one mark for:

  • Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Example answers and how they were marked
Full marks1/1

Laser

Why: Laser is the creditworthy answer (1).

No marks0/1

A read/write head

Why: Read/write head is not accepted by the mark scheme; it reads magnetic media, not optical discs, so no marks are awarded.

No marks0/1

Pits and lands

Why: Pits and lands are what the laser reads, not the component that reads the data, so the mark scheme does not accept them.

4Short recall2 marksUnits & Conversion Swap Remove

Data storage is measured in binary multiples.

Define the term bit.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • A binary digit (1)
  • Has the value 0 or 1 (1)
  • The smallest unit of data storage (1)
  • A single 0 or 1 (1)

Allow binary digit/binary place value for binary digit

Allow a single binary digit for a single 0 or 1

Do not accept a group of 8 bits/half a nibble of 4 bits, which describe a byte or a nibble

Do not accept a binary number/binary on its own

Example answers and how they were marked
Full marks2/2

A binary digit that can have the value 0 or 1.

Why: A binary digit (1) and has the value 0 or 1 (1).

Some marks1/2

It is the smallest unit of data storage.

Why: Smallest unit of data storage (1), but does not state that it is a binary digit or that it has the value 0 or 1.

No marks0/2

A group of 8 bits.

Why: Describes a byte, not a bit; no creditworthy point and named in the Do not accept line.

5Describe2 marksUtility Software Swap Remove

A hard disk can become fragmented as files are saved and deleted.

Describe how disk defragmentation software improves the performance of a hard disk.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Parts of a file are moved so they are stored together/in consecutive locations (1) so the read/write head has less distance to travel to read the file (1)
  • Files are rearranged so that each file is stored in one block (1) which reduces the time taken to open/load the file (1)
  • Free space on the disk is collected into one area (1) so new files can be saved without becoming fragmented (1)
  • The parts of each fragmented file are put in order (1) so fewer movements of the read/write head are needed to read it (1)

Do not accept responses about compressing files, deleting files or increasing the amount of storage, as these are not what defragmentation software does.

Do not accept 'it makes the disk faster' without saying how the files are changed.

Example answers and how they were marked
Full marks2/2

It moves the parts of a file so they are stored together in consecutive locations (1), so the read/write head does not have to move as far and the file opens more quickly (1).

Why: Linked point (1) and development (1): the file parts are stored together, which reduces read/write head movement.

Some marks1/2

It reorganises the files on the hard disk so that they are stored together.

Why: The point is made (1) but there is no development saying how this improves performance, so the second mark is not awarded.

No marks0/2

It compresses the files so that they take up less space on the disk.

Why: This describes data compression software, which the mark scheme says is not accepted; no creditworthy point is made.

6Describe2 marksLow and High Level Languages Swap Remove

A programmer has written a program in assembly language.

Describe why it is necessary to translate the program into machine code before it can be run.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
  • Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
  • The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
  • The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Example answers and how they were marked
Full marks2/2

The processor can only execute machine code, so the assembly instructions must be converted into machine code before the program can run.

Why: States what the processor can execute (1) and links it to converting the program's instructions into machine code (1).

Some marks1/2

Each assembly instruction matches one machine code instruction.

Why: Correct point about the one-to-one match (1) but no development saying that this is because the processor only executes machine code.

No marks0/2

Because an assembler translates assembly language into machine code.

Why: Names the translator but gives no reason tied to the processor only being able to execute machine code, so no mark; this is in the 'Do not accept' guidance.

7Explain2 marksPacket Switching Swap Remove

A file is sent across the internet in packets.

Explain why packets from the same file may take different routes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each router chooses the best route at the time (1) so when a route becomes busy/congested or fails, later packets are forwarded along a different path (1)
  • Routers forward each packet separately (1) so the path a packet takes depends on the traffic conditions when that packet arrives (1)
  • A router may send a packet to a different next router (1) if its routing table shows a better/less congested route for that packet (1)
  • Traffic on the internet changes (1) so no single path is kept for the file and each packet can use whichever route is best when it is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow reference to a routing table, or to how a router decides the route, as part of the linked reason.

Do not accept 'the packets have different IP addresses' because all packets from the same file have the same destination IP address, even though their routes can differ.

Do not accept 'the internet is busy' or 'there is a lot of traffic' on its own without linking this to the router choosing a different route.

Do not accept 'different routers send the packets' on its own without a reason why a different router/route is chosen.

Do not accept an answer that only says the packets take different routes without explaining why.

Example answers and how they were marked
Full marks2/2

Each router chooses the best route at the time, so if one route becomes busy or fails, later packets are sent a different way.

Why: Linked point (1) that each router chooses the best route at the time and reason (1) that a busy or failed route means later packets take a different path.

Some marks1/2

Routers send packets along the least congested route.

Why: States that a router chooses the least congested route (1) but gives no linked reason why this makes the packets from the file take different routes.

No marks0/2

Because each packet is given a different IP address so they go to different places.

Why: Misconception named in the mark scheme: all packets from the same file share the same destination IP address, even though their routes can differ.

8Calculate2 marksAdding Binary Numbers Swap Remove

Computers manipulate binary patterns.

Complete the table to show the result of the 8-bit binary addition.

[2 marks]
1286432168421
10010101
01001111
Mark scheme

Award one mark for each correct nibble in the correct order:

  • 1110 (1)
  • 0100 (1)

0 marks if the response is not 8-bit binary.

Example answers and how they were marked
Full marks2/2

1110 0100

Why: 149 + 79 = 228, carrying where a column adds to 2: both nibbles are correct (2).

Some marks1/2

1110 0101

Why: A slip in the last bit. The first nibble is correct (1); the second is not.

No marks0/2

1101 1111

Why: Writes 1 in every column with a 1 and never carries. Neither nibble is correct.

9Discuss6 marksPurpose & Function of Operating Systems Swap Remove

A home computer is used to stream music, edit a video and download files at the same time.

Discuss how the operating system manages the processes running on the computer.

Your answer should include:

  • how the CPU is shared between processes
  • the states a process can be in
  • how the operating system responds when a process needs attention
[6 marks]
Mark scheme

Indicative content

How the CPU is shared between processes

  • The operating system uses multitasking to give each process a short time slice on the CPU, so the music, video editor and download appear to run at the same time.
  • The operating system decides which ready process will run next, so one program cannot keep the CPU to itself.
  • The operating system can stop a running process and move it back to ready when its time slice ends, so all processes make progress.

The states a process can be in

  • When a program is opened, the operating system creates a process and moves its instructions into RAM so it is ready.
  • The operating system moves a ready process to running when the CPU is free.
  • A running process becomes blocked when it is waiting for input or data, such as the download waiting for data to arrive.
  • When the process finishes, the operating system terminates it and releases the resources it was using.

How the operating system responds when a process needs attention

  • An interrupt is a signal to the CPU that needs immediate attention, so the operating system suspends the current process and runs the interrupt handler.
  • A hardware interrupt could be a printer out of paper, and a software interrupt could be an error in a program.
  • After the interrupt has been handled, the operating system can return the interrupted process to the CPU.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover at least two of scheduling, process states and interrupts.
  • A response that only states that the OS 'manages processes' or gives a program a turn, without expansion, is limited to Level 1.
Example answers and how they were marked
Full marks6/6

The OS uses multitasking to share the CPU. It gives each process, such as the music player and the video editor, a small time slice so they appear to run at the same time. It decides which ready process is next and how long it runs. When the video editor is opened, the OS creates a process and moves its instructions into RAM so it is ready; when the CPU is free it moves it to running. If the download is waiting for data, the OS marks it blocked so the CPU is not wasted. If the printer runs out of paper, a hardware interrupt tells the CPU to stop and run the interrupt handler; afterwards the OS returns to the process.

Why: Covers scheduling with time slices, process states (ready, running, blocked) and interrupts, with sustained application to the music, video editor and download. Level 3.

Some marks4/6

The operating system uses multitasking so the music and video editor can run at the same time. It gives each program a small amount of time on the CPU. When a program is opened it creates a process and puts it in RAM. If a process is waiting for input it is blocked.

Why: Covers CPU sharing and process states, with some application, but says nothing about interrupts. Level 2.

Some marks1/6

The operating system manages processes by giving each program a turn on the CPU. This stops the computer crashing when too many programs are open.

Why: Gives only a basic, undeveloped point about giving each program a turn, with no linkage or application. Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.