Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 13 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]
  • AAddress bus
  • BControl bus
  • CData bus
  • DSystem bus
Mark scheme
  • A Address bus (1)
  • The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
  • B is not correct because the control bus carries control signals in both directions between the CPU and other components
  • C is not correct because the data bus carries data in both directions between the CPU and main memory
  • D is not correct because the system bus is the collection of all three buses
Example answers and how they were marked
Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

2Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

3Short recall2 marksUnits & Conversion Swap Remove

Data storage is measured in binary multiples.

Define the term bit.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • A binary digit (1)
  • Has the value 0 or 1 (1)
  • The smallest unit of data storage (1)
  • A single 0 or 1 (1)

Allow binary digit/binary place value for binary digit

Allow a single binary digit for a single 0 or 1

Do not accept a group of 8 bits/half a nibble of 4 bits, which describe a byte or a nibble

Do not accept a binary number/binary on its own

Example answers and how they were marked
Full marks2/2

A binary digit that can have the value 0 or 1.

Why: A binary digit (1) and has the value 0 or 1 (1).

Some marks1/2

It is the smallest unit of data storage.

Why: Smallest unit of data storage (1), but does not state that it is a binary digit or that it has the value 0 or 1.

No marks0/2

A group of 8 bits.

Why: Describes a byte, not a bit; no creditworthy point and named in the Do not accept line.

4Describe2 marksUtility Software Swap Remove

A hard disk can become fragmented as files are saved and deleted.

Describe how disk defragmentation software improves the performance of a hard disk.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Parts of a file are moved so they are stored together/in consecutive locations (1) so the read/write head has less distance to travel to read the file (1)
  • Files are rearranged so that each file is stored in one block (1) which reduces the time taken to open/load the file (1)
  • Free space on the disk is collected into one area (1) so new files can be saved without becoming fragmented (1)
  • The parts of each fragmented file are put in order (1) so fewer movements of the read/write head are needed to read it (1)

Do not accept responses about compressing files, deleting files or increasing the amount of storage, as these are not what defragmentation software does.

Do not accept 'it makes the disk faster' without saying how the files are changed.

Example answers and how they were marked
Full marks2/2

It moves the parts of a file so they are stored together in consecutive locations (1), so the read/write head does not have to move as far and the file opens more quickly (1).

Why: Linked point (1) and development (1): the file parts are stored together, which reduces read/write head movement.

Some marks1/2

It reorganises the files on the hard disk so that they are stored together.

Why: The point is made (1) but there is no development saying how this improves performance, so the second mark is not awarded.

No marks0/2

It compresses the files so that they take up less space on the disk.

Why: This describes data compression software, which the mark scheme says is not accepted; no creditworthy point is made.

5Discuss6 marksTranslators Swap Remove

A company writes a photo editing program in a high-level language. The company will sell the finished program to customers. Each customer will install the program on their own computer and run it many times.

Discuss whether the company should use a compiler or an interpreter to translate the program before it is sold.

Your answer should include:

  • the output of each type of translator
  • whether the program has to be translated each time it is run
  • what the customer needs on their computer to run the program.
[6 marks]
Mark scheme

Indicative content

The output of each type of translator

  • A compiler translates the whole program in one go and produces object code.
  • The object code is saved as an executable file, which is already in machine code so the processor can run it directly.
  • An interpreter does not produce object code, so no translated file exists for the company to save and sell.
  • An interpreter translates one line at a time and executes it immediately, but that translation is not kept.

Whether the program has to be translated each time it is run

  • Compiled code is translated once, so the executable can be run as many times as the customer likes without being translated again.
  • If the source code is edited, the whole program has to be compiled again to produce a new executable.
  • An interpreted program is translated again every time it is run, so a customer who runs the program often waits for translation at every run.
  • An executable runs faster than interpreted code because it is already in machine code.

What the customer needs on their computer to run the program

  • A customer who installs the executable needs no compiler on their computer, so the program will run straight away.
  • If the company supplied the source code instead, the customer would need an interpreter installed, and it would have to be an interpreter for their type of computer.
  • A customer given only the executable does not have the source code, so cannot change the program.

Conclusion

  • A compiler is the better choice for this company, because the executable can be sold and the customer runs it without it being translated again and without being given the source code.
  • Using an interpreter would mean supplying the source code to customers and translating the program on every run.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover all three bullets for this company's program, including translating once rather than on every run, and reach a conclusion.

Do not accept 'a compiler fixes errors' (a compiler reports syntax errors at the end of translation, it does not fix them) or 'a compiler is easier to use' with no link to output, translation or the customer. Do not accept answers about translating to assembly language.

Example answers and how they were marked
Full marks6/6

The company should use a compiler. A compiler translates the whole program in one go and produces object code, which is saved as an executable file. This executable is already in machine code, so the customer's processor can run it directly. The program is translated only once, so a customer who runs the program many times does not wait for it to be translated again, and it runs faster than interpreted code would. An interpreter produces no object code, so the company would have nothing to sell as an executable. The customer would have to be given the source code and would need an interpreter installed on their computer, and the program would be translated again every time it was run.

Why: Level 3. Covers the output of both translators (executable from the compiler, no object code from the interpreter), the effect of translating once rather than on every run, and what the customer needs on their computer, all applied to the company selling the program, with a clear conclusion.

Some marks3/6

A compiler produces an executable file, which the company can save and sell to its customers. An interpreter does not produce an executable file, so the customer would need the source code and an interpreter installed on their computer to run the program. This means a compiler is better for the company, because customers can just run the file they are given.

Why: Level 2. Gives the output of both translators and links this to what the customer needs, with a conclusion, but never says the compiled program is translated once while an interpreted one is translated on every run, so the reasoning is not developed enough for Level 3.

No marks0/6

The company should use a compiler because it is easier to write programs with a compiler and it fixes the errors in the program before the customers get it.

Why: Level 0. No creditworthy point: 'easier to write programs' is not linked to the output, the translation each run or the customer, and 'fixes the errors' is a misconception, as the mark scheme's guidance says a compiler only reports errors at the end of translation.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.