Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]
  • AAddress bus
  • BControl bus
  • CData bus
  • DSystem bus
Mark scheme
  • A Address bus (1)
  • The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
  • B is not correct because the control bus carries control signals in both directions between the CPU and other components
  • C is not correct because the data bus carries data in both directions between the CPU and main memory
  • D is not correct because the system bus is the collection of all three buses
Example answers and how they were marked
Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

2Short recall2 marksPrimary Memory Swap Remove

A computer is designed using the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The program instructions and data are stored together in main memory/RAM (1)
  • The same memory is used for both instructions and data (1)
  • The instructions are fetched from main memory and executed by the CPU (1)
  • The instructions are fetched and executed one at a time / in sequence (1)
  • The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Example answers and how they were marked
Full marks2/2

The program instructions and the data are stored together in main memory, and the CPU fetches the instructions one at a time and executes them.

Why: Creditworthy point that instructions and data are stored in the same main memory (1) and the linked point that the CPU fetches and executes them from memory (1).

Some marks1/2

The program is held in the main memory (RAM) so that the computer can run it.

Why: Earns the point that the program instructions are stored in main memory (1), but does not say that the CPU fetches and executes them, so the second mark is not earned.

No marks0/2

The program is stored on the hard disk and loaded into the CPU when it is run.

Why: Both parts are misconceptions named in the Do not accept lines: the stored program concept keeps the instructions in main memory, not on secondary storage or in the CPU.

3Describe2 marksStored Program Computers Swap Remove

The CPU contains an arithmetic logic unit (ALU).

Describe the purpose of the arithmetic logic unit (ALU).

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Carries out arithmetic operations/calculations, such as addition or subtraction (1) so that the result can be stored in a register (1)
  • Carries out logical operations, such as comparing two data items (1) to see which one is greater/larger (1)
  • Compares two data items (1) to decide whether a condition is true / which path a program takes next (1)

Allow the result of an arithmetic or logical operation being held/stored in a register, but only where the operation is named.

Do not accept answers that say the ALU stores data or results without naming an operation (registers/main memory store data).

Do not accept answers about controlling components, decoding instructions or timing (that is the control unit or the clock).

Do not award credit for 'it processes data' on its own; an arithmetic or a logical operation must be named.

An example on its own, e.g. 'it adds two numbers', does not earn a second mark; the second mark needs a linked development.

Example answers and how they were marked
Full marks2/2

The ALU carries out arithmetic operations such as addition and subtraction, and the result of the calculation is stored in a register.

Why: Linked point (1) for arithmetic operations with an example, and development (1) for the result being stored in a register.

Some marks1/2

It does all the calculations in the CPU, for example adding two numbers together.

Why: Point (1) for arithmetic operations/calculations named with an example; no linked development, so the second mark is not earned.

No marks0/2

It stores the results of calculations so that they can be used by the CPU later.

Why: Storing results with no arithmetic or logical operation named, which the 'Do not accept' line rules out, so no mark is earned.

4Explain2 marksPrimary Memory Swap Remove

A computer follows the von Neumann stored program concept. A program's instructions are stored on secondary storage before the program is run.

Explain one reason why the instructions of a program must be held in RAM before they can be executed.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The CPU can only fetch/read instructions from main memory/RAM (1) so the instructions of a running program must be copied/loaded into RAM before they can be executed (1)
  • RAM is faster to access than secondary storage (1) so the instructions can be fetched quickly enough for the CPU to execute them (1)
  • The CPU needs the instructions in RAM to fetch and execute them (1) because the fetch-decode-execute cycle reads each instruction from main memory/RAM (1)
  • The address of the next instruction is sent to RAM on the address bus (1) so the instruction can be transferred to the CPU/registers for decoding/execution (1)

For both marks, the expansion must follow/associate with the statement.

Allow the point and reason in either order if they are linked.

Do not accept answers that only say the CPU needs instructions, or that RAM is faster, without linking this to fetching/executing the instructions.

Do not accept answers that only say RAM holds data and instructions without linking this to the fetch-decode-execute cycle.

Do not accept 'RAM is permanent/non-volatile storage, so the instructions are kept safe' - RAM is volatile.

The response does not need to name the address bus or the fetch stage for full marks; a linked reason that explains why instructions must be in RAM (for example, the CPU can only fetch from RAM, or RAM is faster than secondary storage) is enough.

Example answers and how they were marked
Full marks2/2

The CPU can only fetch instructions from main memory, so the instructions of a running program must be copied into RAM before they can be executed.

Why: Linked point (1) for the CPU only being able to fetch instructions from main memory/RAM, and reason (1) for instructions being copied into RAM before execution.

Some marks1/2

The CPU can only fetch instructions from main memory.

Why: Point (1) only; there is no linked reason that explains why this means the instructions must be held in RAM before execution, such as RAM being faster than secondary storage.

No marks0/2

Instructions are kept in RAM because RAM is permanent storage and does not lose the instructions when the power is turned off.

Why: Misconception: RAM is described as permanent/non-volatile, which the mark scheme's 'Do not accept' line rules out; no creditworthy linked point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.