Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 17 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]
  • AAddress bus
  • BControl bus
  • CData bus
  • DSystem bus
Mark scheme
  • A Address bus (1)
  • The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
  • B is not correct because the control bus carries control signals in both directions between the CPU and other components
  • C is not correct because the data bus carries data in both directions between the CPU and main memory
  • D is not correct because the system bus is the collection of all three buses
Example answers and how they were marked
Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

2Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a file/files smaller (1) so less storage space is needed on the disk (1)
  • Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
  • Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
  • Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked
Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

3Explain2 marksProtocols & Layers Swap Remove

Email protocols are used when an email is sent and received.

Explain the role of SMTP when an email is sent.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Sends outgoing email from the client to the mail server (1) so it can be forwarded/relayed to the recipient's mail server (1)
  • Transfers email between mail servers (1) so it reaches the destination server (1)
  • Pushes/sends the email message (1) because it handles outgoing mail while POP3/IMAP handle incoming mail (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept receiving/downloading email or storing email on the server, which is POP3/IMAP.

Example answers and how they were marked
Full marks2/2

SMTP sends the email from the sender's computer to the mail server (1) so it can be forwarded on to the recipient's mail server (1).

Why: Linked point (1) and reason (1): sends to the mail server so it can be forwarded.

Some marks1/2

SMTP is used to send emails (1).

Why: Role (1) identified, but no linked reason or expansion of what sending involves.

No marks0/2

SMTP downloads the email to the recipient's device (0) so they can read it.

Why: Downloading email is the role of POP3/IMAP, not SMTP, so no credit is given.

4Discuss6 marksFile Management Swap Remove

A student keeps school work and photographs on a laptop. The laptop's storage is almost full. The student uses the operating system's file management.

Discuss the file management tasks the operating system provides that the student can use to manage these files.

Your answer should include:

  • saving files
  • deleting files
  • copying files
[6 marks]
Mark scheme

Indicative content

Saving files

  • When saving, the operating system lets the student choose the folder and the file name, so new work goes into the correct subject folder instead of the root.
  • The operating system warns the student before a file with the same name is overwritten, so an earlier version of an essay is not lost by accident.
  • The operating system writes the file into free space on the laptop and records where it is, so the student can open it again later.

Deleting files

  • The operating system lets the student delete files that are no longer needed, which frees space so new photographs can be saved.
  • Deleted files are usually moved to the recycle bin first, so a file removed by mistake can be restored.
  • Emptying the recycle bin removes the data permanently and releases the space for other files.

Copying files

  • The operating system lets the student copy files to a USB flash drive, so there is a second copy if the laptop is lost or damaged.
  • Copying leaves the original file in place, so the student can carry on working on the laptop's copy.
  • A whole folder can be copied in one action, including its subfolders, which is quicker than copying each file separately.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover saving, deleting and copying.

Do not accept answers about the processor or defragmentation as file management tasks.

Example answers and how they were marked
Full marks6/6

When the student saves a file, the operating system lets them pick the folder and name, and it warns before a file with the same name is overwritten, so an earlier essay is not lost. Because the laptop is nearly full, the student can delete photographs they no longer need; these go to the recycle bin at first, so a file removed by mistake can be restored, and emptying the bin releases the space for good. The student can also copy their school work to a USB flash drive, which leaves the original on the laptop and gives a backup if the laptop is damaged.

Why: Saving (choice of folder and name, overwrite warning), deleting (recycle bin, restoring, releasing space) and copying (backup on a USB drive, original kept) are all explained and tied to the student's full laptop.

Some marks3/6

The student can save files into folders so they know where they are. They can delete files they do not need to free up space. They can copy files onto a memory stick.

Why: Three tasks are named with a reason for deleting, but saving and copying are not developed and there is little linkage between the points, so Level 2.

No marks0/6

The operating system saves files automatically and deletes old files when the RAM is full. The processor copies the files to the hard disk.

Why: No creditworthy point: files are not saved automatically, RAM filling does not trigger file deletion, and copying is not done by the processor. Typical confusion between file management and memory or processor management.

5Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

  • machine independence
  • processor specificity
  • how the code is translated for each type of computer.
[6 marks]
Mark scheme

Indicative content

Machine independence

  • A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
  • The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
  • Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

  • A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
  • Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
  • Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
  • Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

  • High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
  • Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
  • Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
  • Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
  • Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.
Example answers and how they were marked
Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.