Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

6 questions · 19 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]
  • AAddress bus
  • BControl bus
  • CData bus
  • DSystem bus
Mark scheme
  • A Address bus (1)
  • The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
  • B is not correct because the control bus carries control signals in both directions between the CPU and other components
  • C is not correct because the data bus carries data in both directions between the CPU and main memory
  • D is not correct because the system bus is the collection of all three buses
Example answers and how they were marked
Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

2Short recall2 marksUnits & Conversion Swap Remove

Data storage is measured in binary multiples.

Define the term bit.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • A binary digit (1)
  • Has the value 0 or 1 (1)
  • The smallest unit of data storage (1)
  • A single 0 or 1 (1)

Allow binary digit/binary place value for binary digit

Allow a single binary digit for a single 0 or 1

Do not accept a group of 8 bits/half a nibble of 4 bits, which describe a byte or a nibble

Do not accept a binary number/binary on its own

Example answers and how they were marked
Full marks2/2

A binary digit that can have the value 0 or 1.

Why: A binary digit (1) and has the value 0 or 1 (1).

Some marks1/2

It is the smallest unit of data storage.

Why: Smallest unit of data storage (1), but does not state that it is a binary digit or that it has the value 0 or 1.

No marks0/2

A group of 8 bits.

Why: Describes a byte, not a bit; no creditworthy point and named in the Do not accept line.

3Describe2 marksUtility Software Swap Remove

A hard disk can become fragmented as files are saved and deleted.

Describe how disk defragmentation software improves the performance of a hard disk.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Parts of a file are moved so they are stored together/in consecutive locations (1) so the read/write head has less distance to travel to read the file (1)
  • Files are rearranged so that each file is stored in one block (1) which reduces the time taken to open/load the file (1)
  • Free space on the disk is collected into one area (1) so new files can be saved without becoming fragmented (1)
  • The parts of each fragmented file are put in order (1) so fewer movements of the read/write head are needed to read it (1)

Do not accept responses about compressing files, deleting files or increasing the amount of storage, as these are not what defragmentation software does.

Do not accept 'it makes the disk faster' without saying how the files are changed.

Example answers and how they were marked
Full marks2/2

It moves the parts of a file so they are stored together in consecutive locations (1), so the read/write head does not have to move as far and the file opens more quickly (1).

Why: Linked point (1) and development (1): the file parts are stored together, which reduces read/write head movement.

Some marks1/2

It reorganises the files on the hard disk so that they are stored together.

Why: The point is made (1) but there is no development saying how this improves performance, so the second mark is not awarded.

No marks0/2

It compresses the files so that they take up less space on the disk.

Why: This describes data compression software, which the mark scheme says is not accepted; no creditworthy point is made.

4Explain2 marksProtocols & Layers Swap Remove

A bank's website can use HTTP or HTTPS.

Explain one benefit to a customer of the bank's website using HTTPS.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Data is encrypted/scrambled (1) so it cannot be read/understood if it is intercepted (1)
  • The customer's bank/personal details are kept secure/private (1) because the data is encrypted/scrambled during transmission (1)
  • The customer's login details/password cannot be read by an eavesdropper (1) because HTTPS encrypts/scrambles the data sent to and from the web server (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'scrambled' as an alternative to 'encrypted'.

Do not accept 'it is more secure/safe' or 'the data is secure' on its own, without saying how it is made secure (e.g. encryption/scrambling).

Do not accept faster loading/speed, or claims that HTTPS stops viruses or always proves the website is genuine.

Example answers and how they were marked
Full marks2/2

The data is encrypted (1) so anyone intercepting it cannot read the customer's bank details (1).

Why: Linked point (1) and reason (1): encryption means intercepted data cannot be read.

Some marks1/2

The data is encrypted (1) so the website is secure.

Why: Point (1) for encryption, but 'secure' on its own is a near-miss that the mark scheme does not credit as the linked reason; it must say why, e.g. that intercepted data cannot be read.

No marks0/2

HTTPS is faster than HTTP (0) so the customer can log in more quickly.

Why: Speed is not a benefit of HTTPS and is named in a 'Do not accept' line, so no creditworthy point is given.

5Discuss6 marksUser Management Swap Remove

A school library has 24 computers that are shared by students and teachers throughout the day. Each computer runs an operating system. The school wants users' work to be kept private and the computers to be used only by authorised people.

Discuss how the operating system's user management features can be used to share the computers securely.

Your answer should include:

  • user accounts
  • authentication
  • the benefits for the school.
[6 marks]
Mark scheme

Indicative content

User accounts

  • Each student and teacher should have their own user account, so the operating system can identify the person who is logged on.
  • The operating system keeps a record of all valid users on the computer, so unknown users are not allowed to log in.
  • A separate home area or folder can be created for each account, so a student's saved work is kept apart from other users' work.
  • An account can be disabled when a student leaves the school, so they can no longer access the computers.

Authentication

  • A username and password can be required at login, so only users with the correct details can use the computer.
  • The operating system checks the entered password against the stored password for that account before allowing access.
  • Users should be encouraged to choose a strong password, which makes it harder for someone else to guess and log in.
  • The operating system can lock an account after several failed login attempts, which reduces the chance of someone trying passwords repeatedly.

Benefits for the school

  • Many students can share the same computers because each person's files are kept separate.
  • Work is less likely to be deleted or changed by another student, because users only see their own files.
  • The school can see which account was used on a computer, so misuse can be traced to a user.
  • Teachers can be confident that only authorised people can use the library computers.
  • The school does not need a separate computer for every student, so it saves money.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both user accounts and authentication, and apply them to the school library.

Do not accept general operating system functions such as file management or process management unless they are explicitly linked to managing users.

Example answers and how they were marked
Full marks6/6

Each student and teacher should have their own user account with a username and password. When someone logs in, the operating system checks the password against the one stored for that account, so only authorised people can use the computer. Each account can have its own home folder, so a student's work is kept private and another student cannot open or delete it. If a student leaves the school, their account can be disabled so they cannot log in again. This lets the school share a smaller number of computers safely, as each user's work stays separate and any misuse can be traced to the logged-in account.

Why: Level 3. It explains user accounts, authentication and benefits, with sustained links to sharing computers in the school library.

Some marks4/6

Every user should have a username and password. The operating system checks the password so that people who are not allowed cannot log in. Each user should also have their own area to save files so they do not delete other people's work.

Why: Level 2. Basic accounts and authentication points are made and linked, but the benefits to the school are only briefly applied and not developed.

No marks0/6

The operating system manages the users by looking after the files in folders and by making sure the printer works for everyone. It also keeps the computer running quickly when lots of students use it.

Why: Level 0. These are general operating system functions such as file management and peripheral management, not user management, so no creditworthy point is made.

6Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

  • how each translator deals with a syntax error
  • how much of the program is translated at a time
  • how this affects the student's testing.
[6 marks]
Mark scheme

Indicative content

How each translator deals with a syntax error

  • An interpreter stops as soon as it finds a syntax error and displays an error message.
  • With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
  • A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

  • An interpreter translates one line at a time and executes each line immediately.
  • A compiler translates the whole program in one go before any of it is run.
  • A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
  • An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

  • An interpreter suits this student because the program can be run straight away after each small change.
  • The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
  • Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
  • The student should use an interpreter while testing, and compile the finished program once it works.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked
Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.