Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 8 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the function of the control unit in the fetch-decode-execute cycle.

[1 mark]
  • ADecodes instructions
  • BPerforms arithmetic operations
  • CStores data and instructions
  • DTemporarily stores data being processed
Mark scheme
  • A Decodes instructions (1)
  • The only correct answer is A. The correct answer is Decodes instructions.
  • B is not correct because the arithmetic logic unit performs arithmetic operations
  • C is not correct because main memory stores data and instructions
  • D is not correct because registers temporarily store data being processed
Example answers and how they were marked
Full marks1/1

A Decodes instructions

Why: Correct option: the control unit decodes instructions during the fetch-decode-execute cycle (1).

No marks0/1

C Stores data and instructions

Why: Main memory stores data and instructions, not the control unit; this is a common distractor, so no mark.

No marks0/1

B Performs arithmetic operations

Why: Arithmetic operations are performed by the ALU, not the control unit; a common confusion between CPU components, so no mark.

2Multiple choice1 markCharacter Sets Swap Remove

A text file stores each character using 7-bit ASCII.

Identify the denary ASCII code for the space character.

[1 mark]
  • A32
  • B33
  • C48
  • D65
Mark scheme
  • A 32 (1)
  • The only correct answer is A. The correct answer is 32.
  • B is not correct because 33 is the ASCII code for the exclamation mark (!)
  • C is not correct because 48 is the ASCII code for the character 0
  • D is not correct because 65 is the ASCII code for the uppercase letter A
Example answers and how they were marked
Full marks1/1

A 32

Why: Correct option: the space character has the ASCII code 32 (1).

No marks0/1

C 48

Why: Near miss scoring 0: 48 is the ASCII code for the character 0, not the space character.

No marks0/1

D 65

Why: Misconception scoring 0: 65 is the ASCII code for the uppercase letter A, so a well-known code is given but not the code for a space.

3Short recall2 marksUnits & Conversion Swap Remove

A solid state drive has a capacity of 5 gibibytes.

Give an expression to calculate the number of bits in 5 gibibytes. You do not need to do the calculation.

[2 marks]
Mark scheme

Award one mark for each of:

  • 5 × 1024^3 / 5 × 1024 × 1024 × 1024 / 5 × 2^30, for the number of bytes (1)
  • A fully correct expression with × 8 to convert bytes to bits, in any order, e.g. 5 × 1024^3 × 8, 8 × 5 × 2^30 (1)

Accept 5 × 1 073 741 824 × 8.

Accept 5 × 2^33 or 42 949 672 960 as a fully correct expression (2 marks).

Do not accept 5 × 1000^3 × 8, which uses decimal multiples.

Do not accept ÷ 8, which converts bits to bytes.

Example answers and how they were marked
Full marks2/2

8 × 5 × 2^30

Why: 5 × 2^30 is the number of bytes (1) and × 8 converts bytes to bits (1).

Some marks1/2

5 × 2^30

Why: Correct number of bytes using the binary multiple 2^30 (1), but no conversion to bits.

No marks0/2

5 × 1000^3 × 8

Why: Uses decimal 1000^3 instead of binary 1024^3, so the expression is not fully correct; no creditworthy point.

4Describe2 marksLow and High Level Languages Swap Remove

A programmer has written a program in assembly language.

Describe why it is necessary to translate the program into machine code before it can be run.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
  • Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
  • The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
  • The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Example answers and how they were marked
Full marks2/2

The processor can only execute machine code, so the assembly instructions must be converted into machine code before the program can run.

Why: States what the processor can execute (1) and links it to converting the program's instructions into machine code (1).

Some marks1/2

Each assembly instruction matches one machine code instruction.

Why: Correct point about the one-to-one match (1) but no development saying that this is because the processor only executes machine code.

No marks0/2

Because an assembler translates assembly language into machine code.

Why: Names the translator but gives no reason tied to the processor only being able to execute machine code, so no mark; this is in the 'Do not accept' guidance.

5Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive (1) because they follow the same set of rules for communication (1).

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format (1).

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster (0) because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.