Edexcel GCSE Computer Science (1CP2) Exam Questions

• A Decodes instructions (1)
• The only correct answer is A. The correct answer is Decodes instructions.
• B is not correct because the arithmetic logic unit performs arithmetic operations
• C is not correct because main memory stores data and instructions
• D is not correct because registers temporarily store data being processed

Award one mark for any of the following up to a maximum of two marks:

• Microwave (oven) (1)
• Washing machine (1)
• Dishwasher (1)
• Digital camera (1)
• Satellite navigation/satnav system (1)
• Traffic light(s) (1)
• Central heating controller/thermostat (1)
• Digital watch/fitness tracker (1)
• Vending machine (1)
• Car (as it contains embedded systems) (1)

Allow any other device that contains an embedded system.

Do not accept general purpose devices such as a laptop, desktop computer, tablet or smartphone (these can run many different programs).

Indicative content

Control unit and ALU

• The control unit fetches and decodes each instruction that the new computers are running, so it works out which operation has to be carried out.
• The control unit sends control signals to the ALU and to main memory over the control bus so that the other components carry out the instruction.
• The control unit receives the clock signal, so each stage of the cycle begins on a clock tick.
• The ALU carries out arithmetic operations, such as adding two values, and logical operations, such as comparing two values, during the execute stage.
• The ALU is the component that performs the calculations that a program running on the new computers needs.
• The data the ALU works on is held in registers, and the result of the operation is stored in a register such as the accumulator.

Registers

• Registers are small, very fast memory locations inside the CPU that hold the instructions and data the CPU is working on.
• The program counter holds the address of the next instruction to be fetched, and it is incremented each time an instruction is fetched.
• The memory address register (MAR) holds the address of the main memory location that is to be read from or written to during the fetch stage.
• The memory data register (MDR) holds the instruction or data brought from main memory (RAM) over the data bus before it is decoded.
• The accumulator holds the result of an operation carried out by the ALU.
• Because registers are inside the CPU, the CPU can keep working on a value without going back to slower main memory during the cycle.

Working together as the cycle repeats

• In the fetch stage, the address of the next instruction is copied from the program counter into the memory address register and sent to main memory over the address bus, and the instruction comes back over the data bus into the memory data register.
• In the decode stage the control unit interprets the instruction and works out which components are needed for it.
• In the execute stage the control unit signals the ALU or main memory so that the instruction is carried out, and the result is held in a register.
• The clock sends a regular pulse so that the fetch, decode and execute stages of each instruction happen in step.
• The program counter is then incremented, so the cycle repeats with the address of the next instruction to be fetched.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• A list of correct but independent roles, with no linkage between the components and no reference to the stages of the cycle, is limited to Level 1; an answer that gives the roles of the components but does not link them to the fetch, decode and execute stages is limited to Level 2; a Level 3 answer must cover the control unit/ALU and registers and link them to the stages of the cycle.
• Award no credit for 'the control unit is the brain of the CPU', 'the ALU stores data' or 'registers are the same as RAM'; accept the program counter, MAR, MDR and accumulator as examples of registers, accept the clock, address bus, data bus and control bus where they are linked to a stage of the cycle, and accept 'main memory' or 'RAM' as equivalent.

Indicative content

What an embedded system is

• An embedded system is a computer system that forms part of a larger device, such as the fitness tracker.
• It performs a single, dedicated or specific task rather than being a general purpose computer.
• It is often built around a microcontroller, which contains the processor, RAM and ROM on a single chip.
• Its software is held in ROM so the tracker can run its program as soon as it is switched on.

Functions in the tracker

• Monitoring the heart rate using a sensor and processing the readings so that they can be displayed on the screen.
• Counting steps using an accelerometer and using the count to calculate the distance walked or the calories burned.
• Tracking sleep by monitoring the wearer's movement during the night.
• Controlling the touch screen so that the user can move between displays.
• Managing the battery, for example stopping the charging when the battery is full and saving power when the tracker is idle.
• Sending the collected data to a smartphone using Bluetooth so that it can be viewed in an app. Accept any other specific function of the fitness tracker that an embedded system could control.

Why an embedded system is suitable for this device

• It has low power consumption, so the battery lasts longer between charges, which matters for a device that is worn all day.
• It is small and light, so it can be fitted into a wristband.
• Its dedicated function means it does not need a full operating system, so it is reliable and does not need restarting.
• The program is small and stored in ROM, so the tracker needs only a small amount of memory.
• It can be optimised for its specific tasks, so it responds quickly to the readings from its sensors.
• The low cost per unit keeps the tracker affordable for the customer.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover what an embedded system is, the functions it performs in the tracker and why it is suitable for the tracker.
• Do not award installing new software/apps, functions the tracker does not perform (such as playing music) or 'it is like a phone'.