Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 530 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

6 questions · 14 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the function of the control unit in the fetch-decode-execute cycle.

[1 mark]
  • ADecodes instructions
  • BPerforms arithmetic operations
  • CStores data and instructions
  • DTemporarily stores data being processed
Mark scheme
  • A Decodes instructions (1)
  • The only correct answer is A. The correct answer is Decodes instructions.
  • B is not correct because the arithmetic logic unit performs arithmetic operations
  • C is not correct because main memory stores data and instructions
  • D is not correct because registers temporarily store data being processed
Example answers and how they were marked
Full marks1/1

A Decodes instructions

Why: Correct option: the control unit decodes instructions during the fetch-decode-execute cycle (1).

No marks0/1

C Stores data and instructions

Why: Main memory stores data and instructions, not the control unit; this is a common distractor, so no mark.

No marks0/1

B Performs arithmetic operations

Why: Arithmetic operations are performed by the ALU, not the control unit; a common confusion between CPU components, so no mark.

2Short recall1 markUnits & Conversion Swap Remove

A file has a size of 2 kibibytes.

State the number of bytes in the file.

[1 mark]
Mark scheme

Award one mark for:

  • 2048 (1)
  • 2 × 1024 (1)
  • 2^11 (1)

Allow 2048 bytes.

Do not accept 2000, which is the number of bytes in two decimal kilobytes.

Do not accept 1024, which is the number of bytes in one kibibyte.

Do not accept 16, which is the number of bits in two bytes.

Example answers and how they were marked
Full marks1/1

2048

Why: 2048 is 2 × 1024, the number of bytes in 2 kibibytes (1).

No marks0/1

2000

Why: 2000 uses the decimal kilobyte, not the binary kibibyte; the mark scheme does not accept it.

No marks0/1

16

Why: 16 is the number of bits in two bytes, confusing bits with bytes; the mark scheme does not accept it.

3Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a file/files smaller (1) so less storage space is needed on the disk (1)
  • Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
  • Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
  • Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked
Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

4Describe2 marksTranslators Swap Remove

High-level code can be translated by a compiler or by an interpreter.

Describe how a compiler translates high-level code differently from an interpreter.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The compiler translates the whole program/complete source code in one go (1) whereas the interpreter translates one line/statement at a time (1)
  • The compiler translates all of the source code before any of it is run/executed (1) but the interpreter translates each line/statement as it reads it (1)
  • The interpreter translates one line/statement at a time (1) and the compiler translates the whole program/source code together (1)

Accept the compiler point and the interpreter point in either order.

Do not accept responses about object code/executable files, when the translated code is executed, how errors are reported, or speed/memory use.

Do not accept 'the interpreter executes/runs each line' on its own, without saying that it translates one line/statement at a time.

Example answers and how they were marked
Full marks2/2

A compiler translates the whole program in one go, while an interpreter translates one line at a time.

Why: Whole program translated in one go (1) and interpreter translates one line at a time (1).

Some marks1/2

A compiler translates the whole program in one go.

Why: Whole program translated in one go (1); no linked point about the interpreter translating a line at a time.

No marks0/2

A compiler produces an executable file, but an interpreter does not.

Why: Describes the output, not the amount translated at a time; object code/executable files are not accepted.

5Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive (1) because they follow the same set of rules for communication (1).

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format (1).

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster (0) because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

6Discuss6 marksSoftware Basics Swap Remove

A dental practice has a network of computers used by receptionists, dentists and managers. Patient records are stored in shared folders and staff have different levels of access.

Discuss how the operating system's file management and user management support the dental practice.

Your answer should consider:

  • file management
  • user management
[6 marks]
Mark scheme

Indicative content

File management

  • The operating system organises the practice's patient records into folders, so staff can find a patient's record quickly during an appointment.
  • It carries out file operations such as saving, moving, renaming and deleting, so a dentist can save updated notes to the correct record.
  • It sets permissions on shared folders and files, so that only authorised staff, such as dentists, can open a patient's clinical records; this reduces the risk of confidential records being seen by the wrong staff.
  • It can give read-only access to some files, so receptionists can view appointment details but cannot change clinical notes.
  • It shows the size of files and the free space on the practice's shared storage, so managers can see when more storage is needed for records.

User management

  • The operating system creates a user account for each member of staff, with a username and password, so that each person has their own access to the system.
  • It allocates access rights to each account, so receptionists, dentists and managers each see only the folders and files their role needs.
  • It allows accounts to be grouped by role, so a new dentist can be given the same permissions as the existing dentists quickly instead of setting each one by hand.
  • It can require strong passwords, which makes it harder for one member of staff to log on using another person's account and open patient records.
  • It can disable or delete an account when a member of staff leaves, so that they can no longer open patient records.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both file management and user management and develop how each supports the practice, for example linking permissions to who can open patient records. Answers that only state basic, undeveloped points such as 'the operating system puts files in folders' or 'users have a username and password', with little reference to the practice, are limited to Level 1 (maximum 2 marks).

Do not accept backup, disk defragmentation or anti-malware software as operating system file management, or encryption, as these are outside the operating system's file management; they are utility software or security measures.

Example answers and how they were marked
Full marks6/6

The operating system's file management lets the practice keep each patient's records in folders, and it carries out the saving, moving and deleting of those files, so a dentist can add notes to the right record after an appointment. File management also sets permissions on the shared folders, so receptionists can be given read-only access to appointment details but cannot change clinical notes, while dentists have write access. This reduces the risk of confidential patient records being seen or changed by the wrong staff. User management supports this because the operating system gives every member of staff their own account with a username and password, so anything done to a record can be traced to the person who did it. Accounts can be grouped by role, so when the practice takes on a new dentist the account can be given the same rights as the other dentists quickly rather than setting each permission by hand. When a member of staff leaves, their account can be disabled so they can no longer open patient records. Together this means the practice can share records across reception, dentists and managers while each person only reaches what their role needs.

Why: Level 3: both file management (folders, saving, permissions, read-only access) and user management (accounts, grouping by role, disabling accounts) are covered and developed, with sustained reasoning linking them to the practice's shared records and staff access.

Some marks2/6

File management puts the patient records into folders so they can be found. User management gives each member of staff a username and password so they can log on to the computer.

Why: Level 1: two basic, independent points, one on each area, with little development and little application to how they support the practice, so it is capped by the Level 1 guidance at 2 marks.

Some marks1/6

File management is when the operating system backs up all the files every night. User management is when the computer has a username so it stops viruses.

Why: Level 1 (1 mark): backup is not accepted as operating system file management, but the basic point that a user account has a username is creditworthy; the claim that it stops viruses is not creditworthy.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.