Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 544 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 8 marks

Pick again
Print
1Multiple choice1 markStored Program Computers Swap Remove

Identify the function of the control unit in the fetch-decode-execute cycle.

[1 mark]
  • ADecodes instructions
  • BPerforms arithmetic operations
  • CStores data and instructions
  • DTemporarily stores data being processed
Mark scheme
  • A Decodes instructions (1)
  • The only correct answer is A. The correct answer is Decodes instructions.
  • B is not correct because the arithmetic logic unit performs arithmetic operations
  • C is not correct because main memory stores data and instructions
  • D is not correct because registers temporarily store data being processed
Example answers and how they were marked
Full marks1/1

A Decodes instructions

Why: Correct option: the control unit decodes instructions during the fetch-decode-execute cycle (1).

No marks0/1

C Stores data and instructions

Why: Main memory stores data and instructions, not the control unit; this is a common distractor, so no mark.

No marks0/1

B Performs arithmetic operations

Why: Arithmetic operations are performed by the ALU, not the control unit; a common confusion between CPU components, so no mark.

2Multiple choice1 markSound Swap Remove

A sound wave is sampled and the amplitude of each sample is stored using 2 bits.

Identify the number of different amplitude values that can be stored for each sample.

[1 mark]
  • A2
  • B4
  • C8
  • D16
Mark scheme
  • B 4 (1)
  • The only correct answer is B. The correct answer is 4 (2 bits give 2^2 = 4 values).
  • A is not correct because 2 is the number of bits used to store each sample
  • C is not correct because 8 different amplitude values would need 3 bits
  • D is not correct because 16 different amplitude values would need 4 bits
Example answers and how they were marked
Full marks1/1

B 4

Why: Selects the only correct option (1).

No marks0/1

C 8

Why: Near miss: 8 values would need 3 bits, one more than this recording uses (0).

No marks0/1

A 2

Why: Typical misconception: 2 is the number of bits, not the number of amplitude values those bits can store (0).

3Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

4Describe2 marksTranslators Swap Remove

A compiler and an interpreter both translate source code.

Describe one difference between what a compiler produces and what an interpreter produces.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A compiler produces object code/machine code/an executable (file) (1) whereas an interpreter produces no object code/translated file (1)
  • A compiler produces a machine code file (1) that can be run on its own/without the compiler/translator being present (1)
  • An interpreter produces no object code/file (1) because it translates and executes each line instead of saving translated code (1)
  • The compiler's output can be saved/stored (1) and run again later, while interpreted code has to be translated again each time it is run (1)

Allow binary for machine code.

Allow executable/an executable for object code.

Do not accept responses about translating the whole program, reporting errors or the speed of execution.

Do not accept 'the interpreter translates/executes one line at a time' on its own: this is how it translates, not what it produces. It earns the development only when linked to no object code/translated file being produced.

Do not accept the interpreter producing object code/an executable.

Example answers and how they were marked
Full marks2/2

A compiler produces object code, which is saved as a file, whereas an interpreter does not produce a file because it translates and executes each line.

Why: Compiler produces object code (1) contrasted with the interpreter producing no object code/translated file (1).

Some marks1/2

The compiler produces machine code.

Why: Machine code/object code produced (1); there is no contrast with the interpreter, so the development is not earned.

No marks0/2

The interpreter produces object code for each line it translates.

Why: Reverses the translators' outputs: the interpreter produces no object code, so nothing is creditworthy.

5Explain2 marksProtocols & Layers Swap Remove

Email protocols are used when an email is sent and received.

Explain the role of SMTP when an email is sent.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Sends outgoing email from the client to the mail server (1) so it can be forwarded/relayed to the recipient's mail server (1)
  • Transfers email between mail servers (1) so it reaches the destination server (1)
  • Pushes/sends the email message (1) because it handles outgoing mail while POP3/IMAP handle incoming mail (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept receiving/downloading email or storing email on the server, which is POP3/IMAP.

Example answers and how they were marked
Full marks2/2

SMTP sends the email from the sender's computer to the mail server (1) so it can be forwarded on to the recipient's mail server (1).

Why: Linked point (1) and reason (1): sends to the mail server so it can be forwarded.

Some marks1/2

SMTP is used to send emails (1).

Why: Role (1) identified, but no linked reason or expansion of what sending involves.

No marks0/2

SMTP downloads the email to the recipient's device (0) so they can read it.

Why: Downloading email is the role of POP3/IMAP, not SMTP, so no credit is given.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 30
Network Security Risks 18 questions Preventing Network Security Risks 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.