Edexcel GCSE Computer Science (1CP2) Exam Questions

• A Decodes instructions (1)
• The only correct answer is A. The correct answer is Decodes instructions.
• B is not correct because the arithmetic logic unit performs arithmetic operations
• C is not correct because main memory stores data and instructions
• D is not correct because registers temporarily store data being processed

• B 4 (1)
• The only correct answer is B. The correct answer is 4 (2 bits give 2^2 = 4 values).
• A is not correct because 2 is the number of bits used to store each sample
• C is not correct because 8 different amplitude values would need 3 bits
• D is not correct because 16 different amplitude values would need 4 bits

Award one mark for any of the following up to a maximum of two marks:

• Program instructions are stored in main memory/RAM (1)
• The data used by the program is stored in main memory/RAM (1)
• The CPU fetches/reads instructions from main memory to execute them (1)
• The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Award one mark for any of the following up to a maximum of two marks:

• A binary digit (1)
• Has the value 0 or 1 (1)
• The smallest unit of data storage (1)
• A single 0 or 1 (1)

Allow binary digit/binary place value for binary digit

Allow a single binary digit for a single 0 or 1

Do not accept a group of 8 bits/half a nibble of 4 bits, which describe a byte or a nibble

Do not accept a binary number/binary on its own

Award up to two marks for a linked description such as:

• Makes a file/files smaller (1) so less storage space is needed on the disk (1)
• Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
• Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
• Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Award up to two marks for a linked description such as:

• The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
• Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
• The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
• The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Award up to two marks for a linked explanation such as:

• Each router chooses the best route at the time (1) so when a route becomes busy/congested or fails, later packets are forwarded along a different path (1)
• Routers forward each packet separately (1) so the path a packet takes depends on the traffic conditions when that packet arrives (1)
• A router may send a packet to a different next router (1) if its routing table shows a better/less congested route for that packet (1)
• Traffic on the internet changes (1) so no single path is kept for the file and each packet can use whichever route is best when it is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow reference to a routing table, or to how a router decides the route, as part of the linked reason.

Do not accept 'the packets have different IP addresses' because all packets from the same file have the same destination IP address, even though their routes can differ.

Do not accept 'the internet is busy' or 'there is a lot of traffic' on its own without linking this to the router choosing a different route.

Do not accept 'different routers send the packets' on its own without a reason why a different router/route is chosen.

Do not accept an answer that only says the packets take different routes without explaining why.

Award one mark for each correct nibble in the correct order:

• 0100 (1)
• 0000 (1)

0 marks if the response is not 8-bit binary.

Indicative content

How the CPU is shared between processes

• The operating system uses multitasking to give each process a short time slice on the CPU, so the music, video editor and download appear to run at the same time.
• The operating system decides which ready process will run next, so one program cannot keep the CPU to itself.
• The operating system can stop a running process and move it back to ready when its time slice ends, so all processes make progress.

The states a process can be in

• When a program is opened, the operating system creates a process and moves its instructions into RAM so it is ready.
• The operating system moves a ready process to running when the CPU is free.
• A running process becomes blocked when it is waiting for input or data, such as the download waiting for data to arrive.
• When the process finishes, the operating system terminates it and releases the resources it was using.

How the operating system responds when a process needs attention

• An interrupt is a signal to the CPU that needs immediate attention, so the operating system suspends the current process and runs the interrupt handler.
• A hardware interrupt could be a printer out of paper, and a software interrupt could be an error in a program.
• After the interrupt has been handled, the operating system can return the interrupted process to the CPU.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover at least two of scheduling, process states and interrupts.
• A response that only states that the OS 'manages processes' or gives a program a turn, without expansion, is limited to Level 1.

Indicative content

How each translator deals with a syntax error

• An interpreter stops as soon as it finds a syntax error and displays an error message.
• With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
• A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

• An interpreter translates one line at a time and executes each line immediately.
• A compiler translates the whole program in one go before any of it is run.
• A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
• An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

• An interpreter suits this student because the program can be run straight away after each small change.
• The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
• Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
• The student should use an interpreter while testing, and compile the finished program once it works.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.