Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

8 questions · 16 marks

Pick again

1Multiple choice1 markStored Program Computers Swap Remove

Identify the function of the control unit in the fetch-decode-execute cycle.

[1 mark]

ADecodes instructions
BPerforms arithmetic operations
CStores data and instructions
DTemporarily stores data being processed

Mark scheme

A Decodes instructions (1)
The only correct answer is A. The correct answer is Decodes instructions.
B is not correct because the arithmetic logic unit performs arithmetic operations
C is not correct because main memory stores data and instructions
D is not correct because registers temporarily store data being processed

Example answers and how they were marked

Full marks1/1

A Decodes instructions

Why: Correct option: the control unit decodes instructions during the fetch-decode-execute cycle (1).

No marks0/1

C Stores data and instructions

Why: Main memory stores data and instructions, not the control unit; this is a common distractor, so no mark.

No marks0/1

B Performs arithmetic operations

Why: Arithmetic operations are performed by the ALU, not the control unit; a common confusion between CPU components, so no mark.

2Multiple choice1 markSound Swap Remove

A sound wave is sampled and the amplitude of each sample is stored using 2 bits.

Identify the number of different amplitude values that can be stored for each sample.

[1 mark]

Mark scheme

B 4 (1)
The only correct answer is B. The correct answer is 4 (2 bits give 2^2 = 4 values).
A is not correct because 2 is the number of bits used to store each sample
C is not correct because 8 different amplitude values would need 3 bits
D is not correct because 16 different amplitude values would need 4 bits

Example answers and how they were marked

Full marks1/1

B 4

Why: Selects the only correct option (1).

No marks0/1

C 8

Why: Near miss: 8 values would need 3 bits, one more than this recording uses (0).

No marks0/1

A 2

Why: Typical misconception: 2 is the number of bits, not the number of amplitude values those bits can store (0).

3Short recall1 markSecondary Memory Swap Remove

Data is stored on optical discs as pits and lands.

Name the component in an optical disc drive that reads this data.

[1 mark]

Mark scheme

Award one mark for:

Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Example answers and how they were marked

Full marks1/1

Laser

Why: Laser is the creditworthy answer (1).

No marks0/1

A read/write head

Why: Read/write head is not accepted by the mark scheme; it reads magnetic media, not optical discs, so no marks are awarded.

No marks0/1

Pits and lands

Why: Pits and lands are what the laser reads, not the component that reads the data, so the mark scheme does not accept them.

4Short recall1 markUnits & Conversion Swap Remove

A file has a size of 2 kibibytes.

State the number of bytes in the file.

[1 mark]

Mark scheme

Award one mark for:

2048 (1)
2 × 1024 (1)
2^11 (1)

Allow 2048 bytes.

Do not accept 2000, which is the number of bytes in two decimal kilobytes.

Do not accept 1024, which is the number of bytes in one kibibyte.

Do not accept 16, which is the number of bits in two bytes.

Example answers and how they were marked

Full marks1/1

2048

Why: 2048 is 2 × 1024, the number of bytes in 2 kibibytes (1).

No marks0/1

2000

Why: 2000 uses the decimal kilobyte, not the binary kibibyte; the mark scheme does not accept it.

No marks0/1

Why: 16 is the number of bits in two bytes, confusing bits with bytes; the mark scheme does not accept it.

5Describe2 marksLow and High Level Languages Swap Remove

A device driver is software that allows the operating system to control a piece of hardware. Device drivers are often written in a low-level programming language.

Describe one reason why a low-level programming language is suitable for writing a device driver.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

Instructions can manipulate/control the hardware/memory/registers directly (1) so the driver can control the specific device it is written for (1)
The code is written for one specific processor/architecture (1) so it works with the exact hardware it will control (1)
The programmer controls exactly how memory/registers are used (1) so the code is efficient and needs little memory, which suits a device that has limited memory (1)
Each instruction maps to one machine code instruction (1) so the driver code is small enough to fit in the memory of the device (1)

Extra detail, such as naming the device the driver controls, is not needed to earn the marks.

Do not accept 'it is closer to machine code' on its own: it must be developed to show how this helps the driver, e.g. it can control the hardware directly.

Do not accept 'it is faster/quicker' with no link to the hardware/device, e.g. the device responds quickly.

Do not accept 'it is easier to learn', 'it is easier to debug' or 'it takes less time to write'.

Example answers and how they were marked

Full marks2/2

Low-level instructions can manipulate the hardware and memory directly (1) so the driver can control the specific device it was written for, such as a sound card (1).

Why: Point about direct control of hardware/memory (1) linked to controlling the specific device (1). The named device is extra detail and is not needed.

Some marks1/2

Low-level instructions can manipulate the hardware directly.

Why: Correct point (1) but no linked development saying how this helps the device driver.

No marks0/2

It is closer to machine code so it runs faster than a high-level language.

Why: 'Closer to machine code' is not developed into how this helps the driver, and 'runs faster' is not linked to the hardware/device, so no mark.

6Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked

Full marks2/2

Devices can understand the data they receive (1) because they follow the same set of rules for communication (1).

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format (1).

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster (0) because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

7Calculate2 marksBinary Shifts Swap Remove

Computers manipulate binary patterns.

Complete the table with the result of applying the shift to the binary pattern.

[2 marks]

Binary pattern	Shift	8-bit binary result
1000 0001	Logical shift right by 1

Mark scheme

Award one mark for each correct nibble in the correct order:

0100 (1)
0000 (1)

0 marks if the response is not 8-bit binary.

Example answers and how they were marked

Full marks2/2

0100 0000

Why: Every bit moves 1 place right, with 0s in from the left: both nibbles are correct (2).

Some marks1/2

0100 0001

Why: A slip in the last bit. The first nibble is correct (1); the second is not.

No marks0/2

0000 0010

Why: Shifts the bits the wrong way. Neither nibble is correct.

8Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

how each translator deals with a syntax error
how much of the program is translated at a time
how this affects the student's testing.

[6 marks]

Mark scheme

Indicative content

How each translator deals with a syntax error

An interpreter stops as soon as it finds a syntax error and displays an error message.
With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

An interpreter translates one line at a time and executes each line immediately.
A compiler translates the whole program in one go before any of it is run.
A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

An interpreter suits this student because the program can be run straight away after each small change.
The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
The student should use an interpreter while testing, and compile the finished program once it works.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked

Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

More ways to revise Edexcel GCSE Computer Science (1CP2)