Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksStored Program Computers Swap Remove

The central processing unit (CPU) contains an arithmetic logic unit (ALU).

State two types of operation carried out by the ALU.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • An arithmetic operation, e.g. addition/subtraction/multiplication/division (1)
  • A logical operation, e.g. comparing two values (is A > B?) / using AND, OR, NOT (1)

Do not accept decoding instructions, fetching instructions or controlling the timing of the CPU, as these are carried out by the control unit.

Example answers and how they were marked
Full marks2/2

It carries out arithmetic operations such as addition and subtraction, and logical operations such as comparing two values to see if one is greater than the other.

Why: Arithmetic operation (1) and logical operation (1).

Some marks1/2

It adds numbers together and works out the result.

Why: Arithmetic operation, addition (1). No logical operation.

No marks0/2

It decodes the instructions that have been fetched from main memory.

Why: Decoding and fetching are the control unit's role; the mark scheme's do-not-accept line covers this.

2Describe2 marksSecondary Memory Swap Remove

Computers use secondary storage.

Describe the role of secondary storage.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
  • Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
  • Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Example answers and how they were marked
Full marks2/2

Secondary storage stores programs and data that are not currently in use so that they can be loaded into RAM when they are needed.

Why: Role point (1) linked to loading into RAM when needed (1).

Some marks1/2

It stores files and programs that are not currently in use.

Why: Correct role on its own earns one mark (1); no linked development, so the second mark is not awarded.

No marks0/2

It holds the data and instructions the CPU is working on so the computer runs faster.

Why: Describes primary storage/RAM and a speed benefit, which the mark scheme does not accept; no role of secondary storage is given.

3Explain2 marksEmbedded Systems Swap Remove

An engine control unit (ECU) in a car is an embedded system.

Explain one benefit of using an embedded system for the engine control unit instead of a general purpose computer.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
  • (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
  • (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
  • (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
  • (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Example answers and how they were marked
Full marks2/2

It is more reliable than a general purpose computer because it only runs the one program so it will not crash and stop the engine working.

Why: Benefit stated (1) with a linked reason (1); the reason shows why only running one program makes it reliable.

Some marks1/2

It is more reliable because it is part of the car's engine.

Why: Only the benefit earns a mark (1); being part of the car is a location, not a linked reason why it is reliable.

No marks0/2

It is faster than a general purpose computer because it is embedded in the engine.

Why: Misconception that an embedded system is faster; embedded systems have limited processing resources, so neither point nor reason is creditworthy.

4Discuss6 marksPrimary Memory Swap Remove

A school is buying new computers for its IT room. The computers the technician has ordered have 16 GB of RAM and a large hard drive.

Discuss why main memory (RAM) is needed for programs to run on these computers.

Your answer should include:

  • the role of RAM in the stored program concept
  • what happens to a program when it is opened
  • why the CPU cannot execute a program directly from secondary storage.
[6 marks]
Mark scheme

Indicative content

the role of RAM in the stored program concept

  • In the von Neumann stored program concept, a program's instructions and the data it uses are held together in main memory.
  • RAM holds the instructions and data of the program that the CPU is currently processing.
  • The CPU fetches each instruction from RAM during the fetch-decode-execute cycle, so a program must be in RAM before it can be run.
  • RAM is directly accessible by the CPU, so instructions can be fetched quickly enough for the CPU to keep working.

what happens to a program when it is opened

  • When a program is opened, a copy of its instructions and data is transferred from secondary storage, such as the hard drive, into RAM.
  • The operating system loads the program into RAM so that the CPU can start fetching and executing its instructions.
  • When the program is closed, it is removed from RAM, and the space it used is free for another program.
  • If a computer does not have enough RAM, the program may not open, or another open program has to be closed first.

why the CPU cannot execute a program directly from secondary storage

  • Secondary storage, such as a hard disk drive, is much slower to access than RAM.
  • The CPU can process instructions much faster than secondary storage can supply them, so the CPU would have to wait and would not be working at full speed.
  • RAM is fast electronic memory with no moving parts, so data can be read from it in a fraction of the time taken by a magnetic hard disk drive.
  • Running the school's programs directly from secondary storage would make the computers in the IT room very slow to use.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both the role of RAM in the stored program concept and the speed difference between RAM and secondary storage, with a reason such as the CPU having to wait for instructions.
  • Answers that make only basic, independent points, such as what RAM is, that a program is copied into RAM when it is opened, or that RAM is faster than a hard drive, without linking them to explain why the CPU would have to wait for instructions, are limited to Level 1.
  • Do not accept statements that RAM is permanent storage, that RAM replaces secondary storage, or that secondary storage is read-only.
Example answers and how they were marked
Full marks6/6

The computers need RAM because of the von Neumann stored program concept, in which the instructions of a program and the data it uses are both held in main memory. When a student opens a program on one of the new computers, the operating system copies it from the hard drive into RAM. The CPU then fetches each instruction from RAM in the fetch-decode-execute cycle, so the program must be in RAM before it can be run. The CPU cannot execute a program directly from secondary storage because a hard disk drive is much slower than RAM. It has moving parts and a much lower transfer rate, so the CPU would often have nothing to do while it waited for the next instruction. RAM is fast electronic memory that the CPU can read directly, which is why 16 GB of RAM lets the school run several programs at once and still keep the CPU working at full speed.

Why: Comprehensive understanding: the stored program concept is explained (instructions and data held in main memory), the program being opened is linked to it, and the speed difference is developed with the reason that the CPU would wait for instructions, all applied to the school's computers. Level 3.

Some marks2/6

RAM is the main memory of the computer. It stores the programs and data that are being used at the moment. When you open a program it is copied into RAM, and the CPU fetches instructions from RAM. RAM is faster than the hard drive, so a program runs better from RAM. Having 16 GB means the school can have more programs open at once.

Why: Basic, independent points only: what RAM is, that a program is copied into RAM when it is opened, that the CPU fetches instructions from RAM, and that RAM is faster than a hard drive. None is linked to the stored program concept or developed to explain why the CPU would have to wait for instructions, so Level 1, 2 marks.

No marks0/6

RAM is the permanent storage inside the computer, like a hard drive. The school needs 16 GB of RAM so that all the students' files can be saved permanently. When a program is opened, it is copied from RAM to the CPU. The CPU cannot execute from secondary storage because secondary storage is read-only.

Why: No creditworthy points. RAM is described as permanent storage, files are said to be saved permanently in RAM, a program is said to be copied from RAM to the CPU, and secondary storage is said to be read-only. All are the misconceptions listed in the Do not accept guidance, so Level 0.

Questions by topic

5.3 Cybersecurity

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.