Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 9 marks

Pick again
Print
1Short recall2 marksStored Program Computers Swap Remove

The central processing unit (CPU) contains an arithmetic logic unit (ALU).

State two types of operation carried out by the ALU.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • An arithmetic operation, e.g. addition/subtraction/multiplication/division (1)
  • A logical operation, e.g. comparing two values (is A > B?) / using AND, OR, NOT (1)

Do not accept decoding instructions, fetching instructions or controlling the timing of the CPU, as these are carried out by the control unit.

Example answers and how they were marked
Full marks2/2

It carries out arithmetic operations such as addition and subtraction, and logical operations such as comparing two values to see if one is greater than the other.

Why: Arithmetic operation (1) and logical operation (1).

Some marks1/2

It adds numbers together and works out the result.

Why: Arithmetic operation, addition (1). No logical operation.

No marks0/2

It decodes the instructions that have been fetched from main memory.

Why: Decoding and fetching are the control unit's role; the mark scheme's do-not-accept line covers this.

2Describe2 marksLow and High Level Languages Swap Remove

A programmer has written a program in assembly language.

Describe why it is necessary to translate the program into machine code before it can be run.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
  • Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
  • The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
  • The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Example answers and how they were marked
Full marks2/2

The processor can only execute machine code, so the assembly instructions must be converted into machine code before the program can run.

Why: States what the processor can execute (1) and links it to converting the program's instructions into machine code (1).

Some marks1/2

Each assembly instruction matches one machine code instruction.

Why: Correct point about the one-to-one match (1) but no development saying that this is because the processor only executes machine code.

No marks0/2

Because an assembler translates assembly language into machine code.

Why: Names the translator but gives no reason tied to the processor only being able to execute machine code, so no mark; this is in the 'Do not accept' guidance.

3Explain2 marksTopologies Swap Remove

A bus topology has a terminator at each end of its cable.

Explain why terminators are needed in a bus topology.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Terminators absorb the signal at the ends of the cable (1) so it is not reflected back along the bus (1)
  • Terminators prevent signals reflecting/bouncing back (1) so the reflected signal does not corrupt data on the cable (1)
  • Terminators absorb the signal (1) so it does not collide/interfere with data being sent by other devices (1)
  • Terminators stop the signal reflecting back down the cable (1) so data can be transmitted and received without errors (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'interfere'/'corrupt' only where the answer says the reflected signal mixes with/collides with data on the cable.

Do not accept 'to stop the signal' on its own, as stopping the signal is not the same as stopping it reflecting back along the cable.

Do not accept 'to terminate the cable/network', 'to end the cable' or 'to stop the cable breaking'.

Do not award responses that only repeat the stem, e.g. 'because there is a terminator at each end'.

Example answers and how they were marked
Full marks2/2

Terminators absorb the signal at each end of the cable (1) so that it does not reflect back along the bus (1).

Why: Linked point (1) and reason (1): absorbing the signal is linked to it not being reflected back along the bus.

Some marks1/2

Terminators absorb the signal at the ends of the cable.

Why: Awarded 1 mark for the point that the signal is absorbed, but no linked consequence is given.

No marks0/2

They terminate the network so the cable does not break.

Why: No credit: it does not say the signal is absorbed or that reflections are prevented, and the mark scheme rejects 'to terminate the network' and 'to stop the cable breaking'.

4Calculate3 marksAdding Binary Numbers Swap Remove

Binary patterns can represent numbers.

(a)

Complete the table to show the 8-bit result of the binary addition.

[2 marks]
1286432168421
11011011
11011100
Mark scheme

Award one mark for each correct nibble in the correct order:

  • 1011 (1)
  • 0111 (1)

0 marks if the response is not 8-bit binary.

Ignore a carry shown beyond the eighth bit.

Example answers and how they were marked
Full marks2/2

1011 0111

Why: 219 + 220 = 439, which needs 9 bits; the 8 bits that are kept are both correct (2).

Some marks1/2

0000 0111

Why: Forgets to carry the 1s. The second nibble is correct (1); the first is not.

No marks0/2

1101 1111

Why: Never carries. Neither nibble is correct.

(b)

State the name of the error that occurs when this addition is carried out.

[1 mark]
Mark scheme

Award one mark for:

  • overflow (error) (1)
Example answers and how they were marked
Full marks1/1

Overflow

Why: The result needs more bits than are available (1).

No marks0/1

Underflow

Why: A near miss: the result is too big for 8 bits, not too small.

No marks0/1

A syntax error

Why: A syntax error is a mistake in a program's code, not in arithmetic.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.