Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksStored Program Computers Swap Remove

The central processing unit (CPU) contains an arithmetic logic unit (ALU).

State two types of operation carried out by the ALU.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • An arithmetic operation, e.g. addition/subtraction/multiplication/division (1)
  • A logical operation, e.g. comparing two values (is A > B?) / using AND, OR, NOT (1)

Do not accept decoding instructions, fetching instructions or controlling the timing of the CPU, as these are carried out by the control unit.

Example answers and how they were marked
Full marks2/2

It carries out arithmetic operations such as addition and subtraction, and logical operations such as comparing two values to see if one is greater than the other.

Why: Arithmetic operation (1) and logical operation (1).

Some marks1/2

It adds numbers together and works out the result.

Why: Arithmetic operation, addition (1). No logical operation.

No marks0/2

It decodes the instructions that have been fetched from main memory.

Why: Decoding and fetching are the control unit's role; the mark scheme's do-not-accept line covers this.

2Short recall2 marksUnits & Conversion Swap Remove

A solid state drive has a capacity of 5 gibibytes.

Give an expression to calculate the number of bits in 5 gibibytes. You do not need to do the calculation.

[2 marks]
Mark scheme

Award one mark for each of:

  • 5 × 1024^3 / 5 × 1024 × 1024 × 1024 / 5 × 2^30, for the number of bytes (1)
  • A fully correct expression with × 8 to convert bytes to bits, in any order, e.g. 5 × 1024^3 × 8, 8 × 5 × 2^30 (1)

Accept 5 × 1 073 741 824 × 8.

Accept 5 × 2^33 or 42 949 672 960 as a fully correct expression (2 marks).

Do not accept 5 × 1000^3 × 8, which uses decimal multiples.

Do not accept ÷ 8, which converts bits to bytes.

Example answers and how they were marked
Full marks2/2

8 × 5 × 2^30

Why: 5 × 2^30 is the number of bytes (1) and × 8 converts bytes to bits (1).

Some marks1/2

5 × 2^30

Why: Correct number of bytes using the binary multiple 2^30 (1), but no conversion to bits.

No marks0/2

5 × 1000^3 × 8

Why: Uses decimal 1000^3 instead of binary 1024^3, so the expression is not fully correct; no creditworthy point.

3Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a file/files smaller (1) so less storage space is needed on the disk (1)
  • Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
  • Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
  • Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked
Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

4Discuss6 marksFile Management Swap Remove

A small business has one computer with a single hard disk. Two employees save documents and photographs to it every day. The operating system manages the disk.

Discuss why the operating system needs to manage where files are stored on the disk.

Your answer should include:

  • how the operating system allocates disk space when a file is saved
  • how the operating system keeps track of each file
  • what could happen if the operating system did not manage files
[6 marks]
Mark scheme

Indicative content

Allocating space

  • The operating system checks that there is enough free space before a file is saved, so a large photograph does not make the save fail.
  • The operating system finds free space on the disk and allocates it to the new file, so the file's data has somewhere to be written.
  • Disk space is allocated so that a file is not written on top of data that already belongs to another file.
  • When a file is deleted, the operating system marks its space as free so it can be used again by the next document that is saved.

Keeping track

  • The operating system keeps a record of the name, size and location of every file, so it knows where each file is stored.
  • The record is updated whenever a file is saved, renamed or deleted, so it still matches what is on the disk.
  • The operating system uses this record to find a file again, so an employee can open a document or photograph that was saved earlier.
  • The record lets the operating system tell the two employees' documents and photographs apart, even though they are all on the same disk.

Without this management

  • Two files could be given the same space, so one document would overwrite another and the work would be lost.
  • The operating system would not know where a file is stored, so a saved document could not be found and opened again.
  • Space used by deleted files might never be freed, so the disk would fill up and new files could not be saved.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both the allocation of space and the tracking of files, with at least one consequence of no management linked to its cause. Reference to a file being split across blocks that are not next to each other, or to the record holding the location of each block, is Level 3 detail and is not required.

Basic, unlinked points with no application to the business's documents or photographs, and a consequence such as 'files would be lost' with no cause given, are limited to Level 1; to reach Level 2 a point must be linked to a reason (for example, the record is kept so a document can be found again) and be applied to the context. Do not accept defragmentation, process scheduling, user management, peripheral management, or backup and antivirus scanning, as file management.

Example answers and how they were marked
Full marks6/6

Before a document is saved, the operating system checks that there is enough free space on the single disk, so a large photograph cannot make the save fail. It then finds free space and allocates it to the new file, making sure it does not write over data that already belongs to another file. The operating system keeps a record of the name, size and location of every file and updates it whenever a file is saved or deleted. It uses this record to find a file again, so an employee can open a document that was saved earlier. Without this, the two employees could be given the same space, so one document would overwrite the other, or the operating system would not know where a file is stored and the business could not find its work again.

Why: Covers both allocation (free space check, free space given to the file, no overwriting) and tracking (record of name, size and location, updated on save, used to find the file), applies it to the business's single disk and its two employees' documents and photographs, and links the consequences of no management to their causes: Level 3.

Some marks2/6

The operating system decides where on the disk a file is saved. It also keeps a record of where each file is stored. Without this, files would be lost.

Why: Two basic points are made: space is allocated when a file is saved, and a record of where each file is stored is kept. Neither is linked to a reason, there is no application to the business's documents and photographs, and 'files would be lost' is given with no cause: Level 1, top of the level.

Some marks1/6

The operating system puts files in the right place so the disk does not get full. It also defragments the disk to make the files smaller.

Why: One basic point about the operating system placing files on the disk so it does not fill up (Level 1). Defragmentation is not file management and does not make files smaller, so it is not credited: Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.