Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

2Describe2 marksSecondary Memory Swap Remove

A computer uses a magnetic hard disk.

Describe how data is stored on a magnetic hard disk.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A read/write head moves over the surface of the disk (1) to read/write data by detecting or changing the magnetic alignment of areas of the surface (1)
  • The head magnetises areas of the disk surface in different directions (1) so each area represents a binary 1 or 0 (1)
  • Data is stored on concentric circles called tracks (1) which are divided into sectors (1)

Allow one mark for tracks/concentric circles on their own.

For the second mark in the first two bullets, the response must refer to the magnetic alignment/charge being detected or changed, not just that the head reads/writes data.

Do not award a mark for 'it is magnetic' or 'it stores data in binary' with no description of how the data is stored.

Do not accept descriptions of optical storage (e.g. a laser, pits and lands) or solid state storage (e.g. electric charges in chips).

Example answers and how they were marked
Full marks2/2

The read/write head moves over the magnetic surface and magnetises areas of the disk to store the 1s and 0s.

Why: Head moves over the surface (1) and magnetises areas to represent 1s and 0s (1).

Some marks1/2

The data is stored on tracks on the disk.

Why: Tracks/concentric circles (1), but no development such as tracks divided into sectors.

No marks0/2

It is magnetic and saves the data in 1s and 0s.

Why: Near-miss: 'magnetic' alone and 'data in binary/1s and 0s' with no description of how data is stored, which the mark scheme does not award.

3Explain2 marksPrimary Memory Swap Remove

RAM is used to store data while a computer is running.

Explain one reason why the data in RAM is lost when a computer is switched off.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • RAM is volatile (memory) (1) because it needs a constant/continuous power supply to hold/store the data it contains (1)
  • Data is held in RAM as electrical states/charges (1) so when the power supply is removed these states cannot be kept/refreshed and the data is lost (1)
  • RAM is used as short-term storage for the data and instructions currently in use (1) because it can only hold them while the computer has power (1)

For both marks, the expansion must follow/associate with the statement and must link the loss of the data to the power supply being removed.

Accept 'RAM is volatile' on its own for the first mark; the second mark is only awarded for a linked reason about the power supply.

Do not accept 'RAM is temporary/short-term memory' or 'RAM is cleared when the computer is switched off' on its own for both marks, as neither gives a reason.

Do not accept answers that say the data is deleted/cleared/erased by the computer or the operating system, or that the data is saved/moved to secondary storage, without saying why the data cannot be kept (e.g. because RAM needs power/is volatile).

Example answers and how they were marked
Full marks2/2

RAM is volatile memory, which means it needs a constant power supply to keep the data it is holding. When the power is switched off, the data is lost.

Why: Linked point (1) for 'RAM is volatile memory' and reason (1) for needing a constant power supply to hold the data.

Some marks1/2

The data in RAM is lost because RAM is volatile memory.

Why: Point (1) for 'RAM is volatile' but no linked reason about the power supply, and the mark scheme states that 'RAM is volatile' alone earns only the first mark.

No marks0/2

The data is deleted from RAM by the operating system when the computer is shut down so that the memory is free for next time.

Why: No creditworthy point: the answer says the data is deleted without saying why it cannot be kept, which the mark scheme's 'Do not accept' line rules out.

4Discuss6 marksSecondary Memory Swap Remove

An independent film studio sells its films on discs. It also offers the same films as downloads. The studio is deciding whether to keep selling films on optical discs.

Discuss the use of optical storage for selling films.

Your answer should include:

  • how data is stored on optical media
  • the benefits of optical discs for selling films
  • the drawbacks of optical discs for selling films.

You do not need to consider other types of secondary storage.

[6 marks]
Mark scheme

Indicative content

How data is stored on optical media

  • Data is stored as pits and lands burnt or pressed into a spiral track on the disc.
  • A laser beam is shone at the disc and the light that is reflected back is measured; pits and lands reflect the light differently.
  • The differences in the reflected light are read as binary 1s and 0s.

Benefits of optical discs for selling films

  • Optical discs are cheap to mass produce once the master disc has been pressed, so the studio can sell each film at a low price.
  • A disc is small and light, so a customer can easily store it, carry it home or give it as a gift.
  • A Blu-ray disc can hold a whole high-definition film (up to 50 GB), so a customer can watch the film without an internet connection.
  • Artwork can be printed on the disc and its case, which helps the studio sell the film.

Drawbacks of optical discs for selling films

  • A DVD holds only about 8.4 GB, so a high-definition film with extra features may not fit on one and the studio would need to sell it on a Blu-ray instead.
  • Optical discs are easily scratched, which can cause read errors so the film will not play.
  • Many modern devices, such as some laptops, no longer have a disc drive, so some customers would not be able to play the film.
  • Discs can be affected by heat and sunlight, so they may deteriorate over time.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 2 requires points to be linked or developed, for example a benefit or drawback explained in terms of the studio or its customers. An answer that only lists basic, independent points, with no linkage, is limited to Level 1.
  • Level 3 requires all three areas and a judgement about whether the studio should keep selling films on optical discs. Do not credit magnetic storage or solid state storage as a description of how optical media stores data; credit these only where they are compared with optical media.
Example answers and how they were marked
Full marks6/6

Optical media stores data as pits and lands burnt into a spiral track. A laser beam is shone at the disc and the reflected light is measured; pits and lands reflect it differently, and this pattern is read as binary 1s and 0s. Optical discs are cheap to mass produce, so the studio can sell each film at a low price, and a disc is small and light so a customer can store it or give it as a gift. A Blu-ray holds a whole high-definition film and can be played without an internet connection. However, a DVD may not hold a high-definition film with extra features, so the studio would need a Blu-ray, and discs are easily scratched, which can cause read errors so the film will not play. Many modern laptops have no disc drive, so some customers could not play the film. Overall the studio should keep selling discs as well as downloads, because the discs are cheap to produce and give customers a copy that works without an internet connection, even though some customers will prefer to download.

Why: Explains how data is stored on optical media using pits, lands, reflected light and binary (AO1); gives benefits applied to selling films (cheap mass production, portability, Blu-ray holds a film and plays offline) and drawbacks (DVD capacity, scratches causing read errors, no disc drive in modern laptops); ends with a sustained judgement and recommendation, so it meets the Level 3 guidance.

Some marks2/6

Optical storage uses a laser to read pits and lands. It is cheap to make discs, so the studio can sell them cheaply. Discs are portable. But they can be scratched and damaged. Some computers don't have a disc drive.

Why: Basic point about how data is stored, a laser reading pits and lands (1), plus basic points about benefits (cheap to produce, portable) and drawbacks (scratched, no disc drive), but the points are independent and undeveloped with no linkage or application to the studio, so it is the top of Level 1: 2 marks.

No marks0/6

Optical storage uses magnets to store data. The film studio should use optical discs because they are very fast and have a large capacity. They are not affected by scratches.

Why: No creditworthy points. Confuses optical storage with magnetic storage; claims it is fast, has a large capacity and is not affected by scratches, all of which are incorrect. Level 0.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.