Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

2Describe2 marksSecondary Memory Swap Remove

Computers use secondary storage.

Describe the role of secondary storage.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
  • Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
  • Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Example answers and how they were marked
Full marks2/2

Secondary storage stores programs and data that are not currently in use so that they can be loaded into RAM when they are needed.

Why: Role point (1) linked to loading into RAM when needed (1).

Some marks1/2

It stores files and programs that are not currently in use.

Why: Correct role on its own earns one mark (1); no linked development, so the second mark is not awarded.

No marks0/2

It holds the data and instructions the CPU is working on so the computer runs faster.

Why: Describes primary storage/RAM and a speed benefit, which the mark scheme does not accept; no role of secondary storage is given.

3Describe2 marksStored Program Computers Swap Remove

The CPU contains an arithmetic logic unit (ALU).

Describe the purpose of the arithmetic logic unit (ALU).

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Carries out arithmetic operations/calculations, such as addition or subtraction (1) so that the result can be stored in a register (1)
  • Carries out logical operations, such as comparing two data items (1) to see which one is greater/larger (1)
  • Compares two data items (1) to decide whether a condition is true / which path a program takes next (1)

Allow the result of an arithmetic or logical operation being held/stored in a register, but only where the operation is named.

Do not accept answers that say the ALU stores data or results without naming an operation (registers/main memory store data).

Do not accept answers about controlling components, decoding instructions or timing (that is the control unit or the clock).

Do not award credit for 'it processes data' on its own; an arithmetic or a logical operation must be named.

An example on its own, e.g. 'it adds two numbers', does not earn a second mark; the second mark needs a linked development.

Example answers and how they were marked
Full marks2/2

The ALU carries out arithmetic operations such as addition and subtraction, and the result of the calculation is stored in a register.

Why: Linked point (1) for arithmetic operations with an example, and development (1) for the result being stored in a register.

Some marks1/2

It does all the calculations in the CPU, for example adding two numbers together.

Why: Point (1) for arithmetic operations/calculations named with an example; no linked development, so the second mark is not earned.

No marks0/2

It stores the results of calculations so that they can be used by the CPU later.

Why: Storing results with no arithmetic or logical operation named, which the 'Do not accept' line rules out, so no mark is earned.

4Discuss6 marksStored Program Computers Swap Remove

A college is buying new computers for its computer science classroom. A technician explains that the CPU uses three buses to communicate with main memory and other components.

Discuss the role of the address bus, the data bus and the control bus in the fetch-decode-execute cycle.

Your answer should include:

  • what each bus carries
  • the direction in which each bus carries it
  • the role of the buses in the fetch-decode-execute cycle.
[6 marks]
Mark scheme

Indicative content

What each bus carries

  • The address bus carries the address of a memory location that the CPU wants to read from or write to.
  • The data bus carries data and instructions between the CPU and main memory, and between the CPU and other components such as the input and output controllers.
  • The control bus carries control signals, such as read and write, that coordinate the activities of the computer.
  • The clock is a separate component that sends regular pulses, and the control bus carries the signals that keep the other components in time with those pulses.

Direction

  • The address bus is one-way, carrying addresses from the CPU to main memory.
  • The data bus is two-way, so data and instructions can travel both to and from the CPU.
  • The control bus carries control signals from the control unit to the other components, and it is not the clock signal itself.
  • The number of bits in the address bus determines how many memory locations can be addressed, and the number of bits in the data bus determines how much can be transferred at one time.

The role of the buses in the fetch-decode-execute cycle

  • Fetch: the address of the next instruction, held in a register in the CPU, is placed on the address bus so that main memory knows which location to read.
  • Fetch: the control unit sends a read signal on the control bus to main memory.
  • Fetch: the instruction held in that location is returned to the CPU on the data bus.
  • Decode: the control unit decodes the instruction and sends control signals on the control bus to set up the other components, for example telling the ALU which operation to carry out.
  • Execute: the address of any data needed is placed on the address bus, a read or write signal is sent on the control bus, and the data itself travels between the CPU and main memory on the data bus.
  • The cycle repeats, with each step taking place in time with a pulse from the clock.

Level 3 responses must cover all three buses and link them to the fetch-decode-execute cycle, including the fetch stage and at least one of the decode and execute stages. Answers that describe each bus correctly but link none of them to a stage of the cycle are limited to Level 1.

Do not accept 'the address bus carries data', 'the data bus carries addresses', 'the data bus carries instructions only during the fetch stage', 'the control bus carries the clock signal' or 'the control bus is the clock'; the clock is a separate component whose pulses the control signals coordinate with.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)
Example answers and how they were marked
Full marks6/6

At the start of the fetch stage the address of the next instruction, which is held in a register, is placed on the address bus, which is one-way, so that main memory knows which location to read. The control unit sends a read signal on the control bus, and the instruction held at that address is returned to the CPU on the data bus, which is two-way. In the decode stage the control unit works out what the instruction means and sends control signals on the control bus to set up the other components, for example telling the ALU which operation to carry out. In the execute stage, if the instruction needs data from memory, the address of that data is placed on the address bus, a read or write signal is sent on the control bus and the data itself travels on the data bus. Every step happens on a pulse from the clock, which is a separate component, and the control bus carries the signals that keep the components in time with it. The widths of the buses matter too: more address bits mean more memory locations can be addressed and more data bits mean more can be moved at once.

Why: Level 3 (6 marks): all three buses are covered, with what each carries and its direction, and each is linked to the fetch, decode and execute stages, plus the role of the clock and the effect of bus widths.

Some marks2/6

The address bus carries addresses from the CPU to the memory and it is one-way. The data bus carries data and it is two-way. The control bus carries control signals. During the fetch stage the CPU fetches the instruction from memory using these buses.

Why: Level 1 (2 marks): each bus is named with a basic correct statement (address bus carries addresses one-way, data bus is two-way, control bus carries control signals), but no bus is linked to a stage of the cycle, so the guidance line limits this to Level 1; the general mention of the fetch stage is not tied to any bus.

No marks0/6

The address bus carries the data to the CPU. The data bus carries the addresses to the memory. The control bus is the clock that makes the CPU run faster.

Why: Level 0 (0 marks): the address bus and data bus roles are swapped, which the scheme says not to accept, and the control bus is wrongly described as the clock, which is also not accepted, so there is no rewardable content.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.