Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 16 marks

Pick again
Print
1Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

2Describe2 marksLow and High Level Languages Swap Remove

A programmer has written a program in assembly language.

Describe why it is necessary to translate the program into machine code before it can be run.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
  • Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
  • The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
  • The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Example answers and how they were marked
Full marks2/2

The processor can only execute machine code, so the assembly instructions must be converted into machine code before the program can run.

Why: States what the processor can execute (1) and links it to converting the program's instructions into machine code (1).

Some marks1/2

Each assembly instruction matches one machine code instruction.

Why: Correct point about the one-to-one match (1) but no development saying that this is because the processor only executes machine code.

No marks0/2

Because an assembler translates assembly language into machine code.

Why: Names the translator but gives no reason tied to the processor only being able to execute machine code, so no mark; this is in the 'Do not accept' guidance.

3Discuss6 marksFile Management Swap Remove

A student keeps school work and photographs on a laptop. The laptop's storage is almost full. The student uses the operating system's file management.

Discuss the file management tasks the operating system provides that the student can use to manage these files.

Your answer should include:

  • saving files
  • deleting files
  • copying files
[6 marks]
Mark scheme

Indicative content

Saving files

  • When saving, the operating system lets the student choose the folder and the file name, so new work goes into the correct subject folder instead of the root.
  • The operating system warns the student before a file with the same name is overwritten, so an earlier version of an essay is not lost by accident.
  • The operating system writes the file into free space on the laptop and records where it is, so the student can open it again later.

Deleting files

  • The operating system lets the student delete files that are no longer needed, which frees space so new photographs can be saved.
  • Deleted files are usually moved to the recycle bin first, so a file removed by mistake can be restored.
  • Emptying the recycle bin removes the data permanently and releases the space for other files.

Copying files

  • The operating system lets the student copy files to a USB flash drive, so there is a second copy if the laptop is lost or damaged.
  • Copying leaves the original file in place, so the student can carry on working on the laptop's copy.
  • A whole folder can be copied in one action, including its subfolders, which is quicker than copying each file separately.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover saving, deleting and copying.

Do not accept answers about the processor or defragmentation as file management tasks.

Example answers and how they were marked
Full marks6/6

When the student saves a file, the operating system lets them pick the folder and name, and it warns before a file with the same name is overwritten, so an earlier essay is not lost. Because the laptop is nearly full, the student can delete photographs they no longer need; these go to the recycle bin at first, so a file removed by mistake can be restored, and emptying the bin releases the space for good. The student can also copy their school work to a USB flash drive, which leaves the original on the laptop and gives a backup if the laptop is damaged.

Why: Saving (choice of folder and name, overwrite warning), deleting (recycle bin, restoring, releasing space) and copying (backup on a USB drive, original kept) are all explained and tied to the student's full laptop.

Some marks3/6

The student can save files into folders so they know where they are. They can delete files they do not need to free up space. They can copy files onto a memory stick.

Why: Three tasks are named with a reason for deleting, but saving and copying are not developed and there is little linkage between the points, so Level 2.

No marks0/6

The operating system saves files automatically and deletes old files when the RAM is full. The processor copies the files to the hard disk.

Why: No creditworthy point: files are not saved automatically, RAM filling does not trigger file deletion, and copying is not done by the processor. Typical confusion between file management and memory or processor management.

4Discuss6 marksLow and High Level Languages Swap Remove

A school computing club is creating a quiz game. The game will be written by students who are new to programming. It will store the names and scores of players in a list. The club wants to choose a language that helps the students finish the game quickly and with few errors.

Discuss the characteristics of a high-level programming language that make it suitable for writing the quiz game.

Your answer should include:

  • how easy the language is to learn, use and debug
  • the data structures it provides for storing the players' names and scores
  • the built-in functions and library routines it provides.
[6 marks]
Mark scheme

Indicative content

Ease of learning, use and debug

  • High-level language statements are written in English-like words and mathematical symbols, so the students can read the quiz game code and understand what each line does.
  • The language is easier to learn than a low-level language, so students who are new to programming can start writing the quiz game quickly.
  • Errors are easier to find and fix because the code is readable; for example, the students can check a line that updates a score against the rule they intended.
  • The students do not need to know how the processor carries out each statement, so they can concentrate on the quiz questions and rules.

Data structures

  • High-level languages provide lists or arrays, so the names and scores of all the players can be stored under one name and processed with a loop.
  • A record can store a player's name and score as one item; in some languages a dictionary or class can be used instead, which keeps related data together.
  • Using a data structure makes the code shorter and easier to understand than separate variables for every player's name and score.

Built-in functions and library routines

  • High-level languages provide built-in functions such as print and input, so the students can display a question and read a player's answer without writing the underlying code.
  • Library routines such as a random number generator can be used to choose quiz questions, saving the students time.
  • String-handling routines can check or compare a player's answer, so the students do not have to write these routines themselves.
  • Reusing tested routines reduces the amount of code the students write and can reduce errors in the quiz game.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance: Credit only points applied to the quiz game and the students; comparison with low-level languages is not required, but a correct contrast may support a point if it is applied. Do not award generic claims such as 'high-level programs run faster', 'work on any computer' or 'students do not need to learn syntax' unless they are justified for the quiz game.

Level 3 responses must cover all three bullet areas with linked reasoning that explains why the characteristic helps the students finish the game quickly with few errors; an answer covering only two bullet areas is limited to Level 2. Do not award the idea that high-level code is already machine code or is understood directly by the processor. Accept dictionaries or classes as equivalents of records.

Example answers and how they were marked
Full marks6/6

A high-level language is suitable for the quiz game because its statements use English-like words and mathematical symbols, so students who are new to programming can read the code and see what each part of the quiz does. This also makes the game easier to debug, because the students can compare a line that updates a player's score with the rule they intended. The language gives the students lists or arrays, so all the players' names and scores can be stored under one name, and a loop can then go through the list to display the results. A record, or a dictionary in Python, can keep one player's name and score together, which is clearer than using separate variables. The language also provides built-in functions and library routines such as input, print and a random number generator, so the students do not have to write these from scratch. They can use input to ask for a player's name and print to show the score, and a random number routine to choose a question. This lets the club spend its time on the quiz questions and rules, so the students can finish the game quickly with fewer errors.

Why: Covers all three bullet areas with linked reasoning: readable English-like statements and debugging, lists/records for names and scores, and built-in input/print/random routines, all applied to helping new students finish quickly with fewer errors. This meets Level 3.

Some marks3/6

High-level languages use English words, so the students can understand the code for the quiz game and find mistakes more easily. They provide lists or arrays, so the players' names and scores can be stored together, and a loop can be used to display the scores. This makes the game easier to write for students who are new to programming.

Why: Level 2, 3 marks: covers ease of learning/use and data structures with some application to the quiz game, but gives no built-in facilities and limited development of why this helps the club finish quickly, so it is not Level 3.

No marks0/6

High-level code is already machine code, so the computer can run the quiz game without a translator. The students do not need to learn any syntax.

Why: Contains the machine-code misconception and a generic claim that the scheme does not credit; no creditworthy point is made, so Level 0.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.