Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 16 marks

Pick again
Print
1Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

2Calculate2 marksAdding Binary Numbers Swap Remove

Computer systems manipulate bit patterns.

Complete the table to show the result of the 8-bit binary addition.

[2 marks]
1286432168421
10111000
00011111
Mark scheme

Award one mark for each correct nibble in the correct order:

  • 1101 (1)
  • 0111 (1)

0 marks if the response is not 8-bit binary.

Example answers and how they were marked
Full marks2/2

1101 0111

Why: 184 + 31 = 215, carrying where a column adds to 2: both nibbles are correct (2).

Some marks1/2

1010 0111

Why: Writes 0 for 1 + 1 but forgets to carry the 1. The second nibble is correct (1); the first is not.

No marks0/2

1011 1111

Why: Writes 1 in every column with a 1 and never carries. Neither nibble is correct.

3Discuss6 marksUser Management Swap Remove

A small design company has 18 employees who use a network with a shared file server. Some employees are company directors and need to manage the system. Designers need to work on shared project folders, but salary files must be kept private.

Discuss how the operating system's user management can give employees the access they need while protecting the company's files.

Your answer should include:

  • administrator accounts
  • standard user accounts
  • file permissions.
[6 marks]
Mark scheme

Indicative content

Administrator accounts

  • An administrator account can create new user accounts for new employees and delete accounts when employees leave.
  • The administrator can reset a forgotten password, so an employee can get back to work without sharing another person's account.
  • The administrator can set the access rights for each user or group, so designers get access to project folders and only directors can open salary files.
  • Administrator privileges should be given to only a few trusted employees, as administrators can change any settings on the system.

Standard user accounts

  • Designers should use standard user accounts, so they cannot install unauthorised software or change system settings.
  • A standard user can be given permission to read and write files in the project folder that their team uses.
  • Standard users should not be able to change other users' permissions, so the access rules cannot be removed by accident.
  • If a standard user tries to open a file without permission, the operating system denies access.

File permissions

  • Each file or folder can have permissions that allow a user to read, write or delete it.
  • Project folders can be set so all designers can read and write the files inside them.
  • Salary files can be set so only directors can read them, and other users are denied access.
  • Permissions can be set for a group of users, such as all designers, which is quicker than setting them for each person.
  • A file can be made read-only for standard users, so they can view it but cannot change it.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover administrator accounts, standard user accounts and file permissions, and apply them to the design company.

Do not accept general operating system functions such as managing the processor or memory unless they are explicitly linked to controlling what a user can access.

Example answers and how they were marked
Full marks6/6

The directors should have administrator accounts so they can create accounts for new designers, delete accounts when staff leave, and set permissions on the file server. Ordinary designers should have standard user accounts so they cannot install software or change permissions. The administrator can give the designers read and write permission on the shared project folders, but only the directors can read the salary files. This means the designers can work together on projects, while confidential salary information stays private. If a designer leaves, the administrator can disable their account so they can no longer open company files.

Why: Level 3. It covers administrator accounts, standard accounts and file permissions, with coherent application to project folders and salary files.

Some marks4/6

The administrator can add and delete users and set their permissions. Normal users can only access the files they are allowed to. The salary files can be made private so only the administrator can see them.

Why: Level 2. Administrator accounts and file permissions are described with some application, but standard user accounts are not developed and the explanation lacks sustained reasoning.

No marks0/6

The administrator is the person who uses the computer most often, so the operating system gives them more memory and a faster processor. This means they can manage the users.

Why: Level 0. It confuses administrator privileges with extra memory and processor speed, which is process management, not user management.

4Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

  • how each translator deals with a syntax error
  • how much of the program is translated at a time
  • how this affects the student's testing.
[6 marks]
Mark scheme

Indicative content

How each translator deals with a syntax error

  • An interpreter stops as soon as it finds a syntax error and displays an error message.
  • With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
  • A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

  • An interpreter translates one line at a time and executes each line immediately.
  • A compiler translates the whole program in one go before any of it is run.
  • A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
  • An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

  • An interpreter suits this student because the program can be run straight away after each small change.
  • The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
  • Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
  • The student should use an interpreter while testing, and compile the finished program once it works.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked
Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.