Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 10 marks

Pick again
Print
1Multiple choice1 markSecondary Memory Swap Remove

A company stores films on optical media.

Identify the optical storage medium that can store the most data.

[1 mark]
  • ABlu-ray Disc
  • BCD
  • CDVD
  • DMagnetic tape
Mark scheme
  • A Blu-ray Disc (1)
  • The only correct answer is A. The correct answer is Blu-ray Disc.
  • B is not correct because a CD stores less data than a Blu-ray Disc, up to about 700 MB
  • C is not correct because a DVD stores less data than a Blu-ray Disc, up to about 4.7 GB (single-layer) or 8.4 GB (dual-layer)
  • D is not correct because magnetic tape is not an optical storage medium
Example answers and how they were marked
Full marks1/1

A Blu-ray Disc

Why: Correct option (1): a Blu-ray Disc has the greatest capacity of the optical media.

No marks0/1

C DVD

Why: Near miss scoring 0: a DVD is optical but stores less than a Blu-ray Disc (mark scheme line C). Only A is credited.

No marks0/1

D Magnetic tape

Why: Misconception scoring 0: candidates pick tape for its large capacity but magnetic tape is not an optical storage medium (mark scheme line D).

2Short recall2 marksPrimary Memory Swap Remove

A computer is designed using the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The program instructions and data are stored together in main memory/RAM (1)
  • The same memory is used for both instructions and data (1)
  • The instructions are fetched from main memory and executed by the CPU (1)
  • The instructions are fetched and executed one at a time / in sequence (1)
  • The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Example answers and how they were marked
Full marks2/2

The program instructions and the data are stored together in main memory, and the CPU fetches the instructions one at a time and executes them.

Why: Creditworthy point that instructions and data are stored in the same main memory (1) and the linked point that the CPU fetches and executes them from memory (1).

Some marks1/2

The program is held in the main memory (RAM) so that the computer can run it.

Why: Earns the point that the program instructions are stored in main memory (1), but does not say that the CPU fetches and executes them, so the second mark is not earned.

No marks0/2

The program is stored on the hard disk and loaded into the CPU when it is run.

Why: Both parts are misconceptions named in the Do not accept lines: the stored program concept keeps the instructions in main memory, not on secondary storage or in the CPU.

3Short recall1 markSecondary Memory Swap Remove

Data is stored on optical discs as pits and lands.

Name the component in an optical disc drive that reads this data.

[1 mark]
Mark scheme

Award one mark for:

  • Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Example answers and how they were marked
Full marks1/1

Laser

Why: Laser is the creditworthy answer (1).

No marks0/1

A read/write head

Why: Read/write head is not accepted by the mark scheme; it reads magnetic media, not optical discs, so no marks are awarded.

No marks0/1

Pits and lands

Why: Pits and lands are what the laser reads, not the component that reads the data, so the mark scheme does not accept them.

4Discuss6 marksSecondary Memory Swap Remove

A video editing company edits and stores large video files. The company is buying new computers and is choosing between computers with magnetic hard disk drives (HDDs) and computers with solid state drives (SSDs).

Discuss the use of magnetic and solid state storage for the company's video files.

Your answer should consider:

  • how data is stored on magnetic storage
  • how data is stored on solid state storage
  • the suitability of each type of storage for the company.

You do not need to consider optical storage.

[6 marks]
Mark scheme

Indicative content

Magnetic storage

  • A magnetic hard disk drive stores data on a magnetic platter that spins, with a read/write head on an actuator arm that moves over its surface.
  • The read/write head magnetises small areas of the platter to represent binary 1s and 0s, and reads the magnetic pattern back when the data is needed.
  • The data is held on concentric tracks that are divided into sectors. (Accept data being stored magnetically without further detail, but a vague 'it uses a magnet' is not enough for this point.)
  • The platter and the read/write head are sealed inside the drive unit because of the precision needed.

Solid state storage

  • A solid state drive stores data in flash memory chips and has no moving parts.
  • A large electric current forces electrons through a barrier and traps them in a floating gate; the presence or absence of this trapped charge represents a 1 or a 0. (Accept either convention for which charge state represents a 1 and which represents a 0.)
  • The charged cells are detected to read the data back. (Accept: the data can be erased and rewritten by applying a new current.)
  • As there is no disk to spin to the correct position and no arm to move, data can be read from and written to solid state storage very quickly.

Suitability for the company's video files

  • A magnetic HDD has a very large capacity and is generally cheaper per gigabyte than an SSD of the same capacity, which suits a company that stores many large video files.
  • An SSD has very fast read/write speeds, so the company's large video files open and save quickly while they are being edited.
  • An SSD has no moving parts, so it is more durable if the company's computers are carried between filming locations.
  • A magnetic HDD could store finished videos as an archive and an SSD could hold the project being edited, so the company gets high speed while editing and low-cost capacity for storage.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 answers must give accurate accounts of how data is stored on both magnetic and solid state storage and sustain a line of reasoning that applies at least one of them to the company's video files. An answer that covers only one storage type, or that describes both types without any application to the company, cannot go above Level 2.
  • Do not accept descriptions of optical storage (pits and lands, a laser) as magnetic or solid state storage, and do not accept 'magnetic storage uses a laser' or 'solid state storage is volatile' or 'solid state storage is RAM'.
Example answers and how they were marked
Full marks6/6

Magnetic storage stores data on a magnetic platter that spins. A read/write head moves over the surface and magnetises small areas of the platter to represent 1s and 0s, and reads the magnetic pattern back. The data is held on concentric tracks divided into sectors. Solid state storage has no moving parts; it stores data in flash memory chips by forcing electrons through a barrier with an electric current and trapping them in a floating gate. Trapped charge and no trapped charge represent 1 and 0, and the cells are detected to read the data back. For the company, a magnetic HDD is suitable for storing many large video files because it is cheap per gigabyte and has a very large capacity. An SSD is suitable for editing because it has very fast read/write speeds, so large video files open and save quickly, and it is durable if laptops are taken on location. Using an SSD for the project being edited and an HDD to archive finished videos would be best.

Why: Accurate account of magnetic storage with the read/write head over a spinning platter, magnetised areas as 1s and 0s, and tracks divided into sectors (AO1); accurate account of solid state storage with flash memory, electrons trapped in a floating gate and charge detected to read back (AO1); sustained application to the company with HDD cost/capacity for the video files, SSD speed for editing and durability on location, and a justified combination. Level 3.

Some marks2/6

Magnetic storage uses a magnet to store data on a disk. Solid state storage uses electricity and has no moving parts. Magnetic storage is good for storing lots of data cheaply, so the company could use it for video files. Solid state is fast but expensive.

Why: Basic, independent points: data is stored on a disk using magnetism (1) and solid state storage has no moving parts (1), with one contextual link to the company's video files (storing lots of data cheaply). There is no read/write head, platter, track or sector detail, no flash memory or trapped charge, and the speed of an SSD is not linked to opening and saving large video files, so there is little linkage and no sustained reasoning. Level 1, upper end (2).

No marks0/6

Magnetic storage uses a laser to burn pits and lands. Solid state storage uses a magnet to store data. The company should use magnetic storage because it is more durable and faster than solid state.

Why: No creditworthy points. It describes optical storage (a laser, pits and lands) as magnetic storage and describes solid state storage as magnetic, which the mark scheme's do-not-accept line rejects, and the claim that magnetic storage is more durable and faster than solid state is incorrect. Level 0.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.