Edexcel GCSE Computer Science (1CP2) Exam Questions

• A Blu-ray Disc (1)
• The only correct answer is A. The correct answer is Blu-ray Disc.
• B is not correct because a CD stores less data than a Blu-ray Disc, up to about 700 MB
• C is not correct because a DVD stores less data than a Blu-ray Disc, up to about 4.7 GB (single-layer) or 8.4 GB (dual-layer)
• D is not correct because magnetic tape is not an optical storage medium

Award one mark for:

• Volatile (1)

Allow volatile memory / it is volatile.

Do not accept non-volatile, ROM, RAM or temporary/short term memory on their own, as these are not the term asked for.

Award one mark for any of the following up to a maximum of two marks:

• Program instructions are stored in main memory/RAM (1)
• The data used by the program is stored in main memory/RAM (1)
• The CPU fetches/reads instructions from main memory to execute them (1)
• The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Award up to two marks for a linked description such as:

• Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
• A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
• Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
• The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Award up to two marks for a linked explanation such as:

• The battery lasts longer/needs charging less often (1) because embedded systems have low power consumption/use less power (1)
• It can be made small/light enough to wear on the wrist (1) because the processor, memory and input/output are combined on a single chip/microcontroller (1)
• It can carry out the step-counting function reliably (1) because it runs a single/dedicated program and cannot install other software (1)
• It has a low cost per unit (1) because it uses fewer/less powerful components than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

Award one mark for a valid point stated on its own, e.g. 'it is small/light enough to wear on the wrist' (1) or 'its battery lasts longer before it needs charging' (1).

Accept the same linked ideas in either order, e.g. 'it uses less power (1) so the battery lasts longer (1)'.

Do not accept 'it uses less power'/'low power' on its own as a complete explanation; it must be linked to the battery lasting longer/needing charging less often for the second mark.

Do not accept an expansion that simply restates the point, e.g. 'it is small (1) so it fits on the wrist' earns only the point mark; 'fits on the wrist' is not a linked cause and is not enough for the second mark.

Do not accept 'the battery is small' as the linked reason for low power consumption.

Do not accept responses that say other software/apps can be installed on an embedded system (0); embedded systems have a single/dedicated function and cannot install new software.

Indicative content

Stored program concept

• The stored program concept means that the program instructions and the data the program is using are both held in the same main memory (RAM).
• The CPU fetches an instruction from main memory, the control unit decodes it and the instruction is executed, and this is repeated in the fetch-decode-execute cycle.
• The program is stored as a set of binary instructions, so a different program can be run on the college's new computers by loading different instructions into RAM rather than by changing any hardware.
• Instructions are usually carried out one at a time, in the order in which they are stored, which is suitable for the computers in the IT suite that each run one piece of software at a time.

Main memory (RAM)

• Main memory (RAM) holds the instructions and the data that the CPU is currently using.
• RAM is directly accessible by the CPU, so the required instruction or item of data can be fetched quickly during the fetch stage of the cycle.
• RAM can be read from and written to while a program is running, so the results produced by the students' work can be stored back into memory.
• RAM is volatile, so its contents are lost when the power is turned off, and the college's computers will have empty RAM each time they are started.

CPU components

• The control unit decodes each instruction and coordinates the timing and control of the other parts of the CPU, so it directs the fetch-decode-execute cycle.
• The arithmetic logic unit (ALU) carries out arithmetic operations and logical comparisons on the data, for example working out a student's total mark in a spreadsheet.
• Registers are small, fast storage locations inside the CPU that hold the address of the next instruction, the instruction being decoded and the data being worked on.
• The clock sends a regular signal that synchronises the actions of the CPU, so each step of the cycle is carried out in time with the clock.

Buses

• The address bus is one way, from the CPU to main memory, and carries the address of the memory location that the CPU wants to read from or write to.
• The data bus carries the instruction or the data between the CPU and main memory, so it is used to bring an instruction to the CPU in the fetch stage.
• The control bus carries control signals such as read and write, so the CPU can tell main memory whether it is reading an instruction or writing data.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover the role of main memory (RAM) and the role of the CPU components or the buses during the fetch-decode-execute cycle, as well as the stored program concept.
• Do not accept RAM described as being inside the CPU, or as non-volatile, or any point about how clock speed affects performance, because the question excludes it.