Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

6 questions · 13 marks

Pick again

1Multiple choice1 markSecondary Memory Swap Remove

A company stores films on optical media.

Identify the optical storage medium that can store the most data.

[1 mark]

ABlu-ray Disc
BCD
CDVD
DMagnetic tape

Mark scheme

A Blu-ray Disc (1)
The only correct answer is A. The correct answer is Blu-ray Disc.
B is not correct because a CD stores less data than a Blu-ray Disc, up to about 700 MB
C is not correct because a DVD stores less data than a Blu-ray Disc, up to about 4.7 GB (single-layer) or 8.4 GB (dual-layer)
D is not correct because magnetic tape is not an optical storage medium

Example answers and how they were marked

Full marks1/1

A Blu-ray Disc

Why: Correct option (1): a Blu-ray Disc has the greatest capacity of the optical media.

No marks0/1

C DVD

Why: Near miss scoring 0: a DVD is optical but stores less than a Blu-ray Disc (mark scheme line C). Only A is credited.

No marks0/1

D Magnetic tape

Why: Misconception scoring 0: candidates pick tape for its large capacity but magnetic tape is not an optical storage medium (mark scheme line D).

2Short recall1 markPrimary Memory Swap Remove

Computers use RAM to store the data and instructions that are in use.

Name the term used to describe memory that loses its contents when the power is switched off.

[1 mark]

Mark scheme

Award one mark for:

Volatile (1)

Allow volatile memory / it is volatile.

Do not accept non-volatile, ROM, RAM or temporary/short term memory on their own, as these are not the term asked for.

Example answers and how they were marked

Full marks1/1

Volatile

Why: Correct term for memory that loses its contents when the power is switched off (1).

No marks0/1

Temporary memory

Why: Describes what such memory does but is not the term asked for; 'temporary memory' is on the Do not accept line, so no mark.

No marks0/1

Non-volatile

Why: Non-volatile memory keeps its contents when the power is switched off, the opposite of what the question describes; it is explicitly not accepted.

3Short recall1 markSecondary Memory Swap Remove

Data is stored on optical discs as pits and lands.

Name the component in an optical disc drive that reads this data.

[1 mark]

Mark scheme

Award one mark for:

Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Example answers and how they were marked

Full marks1/1

Laser

Why: Laser is the creditworthy answer (1).

No marks0/1

A read/write head

Why: Read/write head is not accepted by the mark scheme; it reads magnetic media, not optical discs, so no marks are awarded.

No marks0/1

Pits and lands

Why: Pits and lands are what the laser reads, not the component that reads the data, so the mark scheme does not accept them.

4Explain2 marksEmbedded Systems Swap Remove

An engine control unit (ECU) in a car is an embedded system.

Explain one benefit of using an embedded system for the engine control unit instead of a general purpose computer.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

(The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
(The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
(The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
(The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
(The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Example answers and how they were marked

Full marks2/2

It is more reliable than a general purpose computer (1) because it only runs the one program so it will not crash and stop the engine working (1).

Why: Benefit stated (1) with a linked reason (1); the reason shows why only running one program makes it reliable.

Some marks1/2

It is more reliable (1) because it is part of the car's engine (1).

Why: Only the benefit earns a mark (1); being part of the car is a location, not a linked reason why it is reliable.

No marks0/2

It is faster than a general purpose computer (0) because it is embedded in the engine (0).

Why: Misconception that an embedded system is faster; embedded systems have limited processing resources, so neither point nor reason is creditworthy.

5Explain2 marksFetch Decode Execute Cycle Swap Remove

The von Neumann architecture is used in most computers.

Explain one feature of the von Neumann stored program concept.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

The instructions/program instructions and data are stored together in main memory/RAM (1) so the CPU can fetch each instruction (from its address) and execute it (1)
The instructions/program instructions are held in main memory/RAM (1) rather than being built into/part of the hardware, so the computer does not need to be rewired/rebuilt to run a different program (1)
The next instruction to be executed/instruction is held in main memory/RAM (1) so the CPU can fetch it using its address before it is decoded and executed (1)

For both marks, the expansion must follow/associate with the statement.

A point/statement on its own can only earn one mark.

Do not accept a response that only refers to data being stored in main memory/RAM without referring to the instructions/program instructions.

Do not accept instructions/programs being stored on the hard disk/backing store.

Do not accept 'the program is stored in memory' without saying that it is the instructions/program instructions that are stored there.

Example answers and how they were marked

Full marks2/2

Both the instructions of the program and the data it uses are stored together in the same main memory, so the CPU can fetch each instruction in turn and execute it.

Why: Linked point (1) and reason (1).

Some marks1/2

The instructions of the program are stored in main memory.

Why: Point only (1); no linked reason about fetching/executing the instructions.

No marks0/2

The program is stored on the hard disk and is copied into the CPU when it is run.

Why: Misconception covered by the 'Do not accept' line: the instructions must be stored in main memory/RAM, not on the hard disk/backing store, for the CPU to fetch them.

6Discuss6 marksFetch Decode Execute Cycle Swap Remove

A small robotics company is designing a new robot. The robot's computer uses von Neumann architecture. The engineers are explaining how programs are stored and run.

Discuss how the von Neumann stored program concept and main memory (RAM) are used during the fetch-decode-execute cycle.

Your answer should include:

what is meant by the stored program concept
the role of RAM in the cycle
why the stored program concept is useful.

[6 marks]

Mark scheme

Indicative content

Stored program concept

Instructions and data are stored together in the same main memory (RAM).
Instructions are fetched one at a time from memory and executed in sequence.
The program can be changed by loading different instructions into RAM.
The CPU can only execute instructions that are in main memory.

Role of RAM

RAM holds the program instructions and the data being used.
The address of the next instruction is held in the program counter (PC).
The instruction is fetched from RAM using the address bus.
The data bus carries the instruction from RAM to the CPU.
RAM is volatile, so programs are lost when power is off.
RAM is directly accessible by the CPU, unlike secondary storage.

Benefits

The same hardware can run many different programs.
Programs can be loaded and changed quickly.
No need to rewire the computer for a new task.
Makes general-purpose computers possible.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Example answers and how they were marked

Full marks6/6

The von Neumann stored program concept means that both the program instructions and the data are stored together in the same main memory, RAM. During the fetch-decode-execute cycle, the CPU fetches an instruction from RAM, decodes it in the control unit, and then executes it. The program counter holds the address of the next instruction, and this address is sent along the address bus to RAM. RAM then returns the instruction along the data bus to the CPU. RAM is volatile, so it only holds the program while the robot is powered on. The stored program concept is useful because the robot's computer can run different programs without changing any hardware; new instructions can simply be loaded into RAM. This makes the computer general-purpose and flexible.

Why: Comprehensive understanding: defines stored program concept, explains RAM role with PC, address bus and data bus, applies to robot, and gives benefits. Sustained lines of reasoning. Level 3.

Some marks3/6

The stored program concept is when instructions and data are stored in RAM. The CPU fetches instructions from RAM. The program counter keeps the address of the next instruction. RAM holds the program. The benefit is that you can change the program without rewiring the computer.

Why: Adequate understanding: correct basic points about stored program concept and RAM, with some linkage, but little development or application to the robot's fetch-decode-execute cycle. Level 2.

Some marks1/6

The von Neumann stored program concept is that the CPU uses RAM to store the program. The fetch-decode-execute cycle fetches, decodes and executes. RAM is random access memory. The benefit is that it is fast.

Why: Basic independent points only; no real linkage or application to the robot. Level 1.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

More ways to revise Edexcel GCSE Computer Science (1CP2)