Edexcel GCSE Computer Science (1CP2) Exam Questions

• A Blu-ray Disc (1)
• The only correct answer is A. The correct answer is Blu-ray Disc.
• B is not correct because a CD stores less data than a Blu-ray Disc, up to about 700 MB
• C is not correct because a DVD stores less data than a Blu-ray Disc, up to about 4.7 GB (single-layer) or 8.4 GB (dual-layer)
• D is not correct because magnetic tape is not an optical storage medium

Award one mark for:

• Volatile (1)

Allow volatile memory / it is volatile.

Do not accept non-volatile, ROM, RAM or temporary/short term memory on their own, as these are not the term asked for.

Award one mark for any of the following up to a maximum of two marks:

• (Storage that is) non-volatile / keeps its data when the power is turned off (1)
• (Storage that is) used to store programs and data/files (for later use) (1)
• (Storage that is) not directly accessible by the CPU / not directly accessed by the CPU (1)

Allow both the non-volatile point and the stores programs and data point from one sentence if each idea is clearly stated, e.g. 'non-volatile storage that holds programs and data'.

Allow accessed via the CPU / must be copied into RAM before the CPU can use it for the third point.

Do not accept volatile / loses its data when the power is turned off.

Do not accept a description of primary storage, such as RAM or ROM.

Do not accept capacity.

Do not accept an example device on its own (e.g. hard disk drive).

Award up to two marks for a linked description such as:

• Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
• A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
• Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
• The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Award up to two marks for a linked explanation such as:

• (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
• (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
• (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
• (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
• (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Award up to two marks for a linked explanation such as:

• Decodes/interprets/translates the instruction (1) to work out what the instruction is/what operation is required (1)
• Sends control signals to the other components (1) so that the correct component carries out the instruction (1), e.g. the ALU/main memory
• Controls the fetch of the instruction from main memory (1) because the address of the next instruction is sent via the address bus (1)
• Controls the fetch of the next instruction from main memory (1) by sending a control signal/read signal to main memory (1)

For both marks, the expansion must follow/associate with the statement.

For the decode point, 'decodes the instruction' alone gains 1 mark; a second mark needs the purpose of decoding, i.e. working out what the instruction is/what operation is required.

Do not accept 'it controls the CPU' on its own, without naming a task in the cycle.

Do not accept 'it fetches the instruction from memory' on its own, as this describes the fetch step rather than the control unit's role; credit only if linked to controlling/signalling the fetch.

Do not accept carrying out arithmetic/logical operations, as these are carried out by the ALU, or holding the address of the next instruction, as this is the program counter.

Do not accept storing the instruction in a register (e.g. MAR/MDR), as this is not the role of the control unit.

Indicative content

Stored program concept

• Instructions and data are stored together in the same main memory (RAM).
• Instructions are fetched one at a time from memory and executed in sequence.
• The program can be changed by loading different instructions into RAM.
• The CPU can only execute instructions that are in main memory.

Role of RAM

• RAM holds the program instructions and the data being used.
• The address of the next instruction is held in the program counter (PC).
• The instruction is fetched from RAM using the address bus.
• The data bus carries the instruction from RAM to the CPU.
• RAM is volatile, so programs are lost when power is off.
• RAM is directly accessible by the CPU, unlike secondary storage.

Benefits

• The same hardware can run many different programs.
• Programs can be loaded and changed quickly.
• No need to rewire the computer for a new task.
• Makes general-purpose computers possible.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Indicative content

Stored program concept

• The stored program concept means that the program instructions and the data the program is using are both held in the same main memory (RAM).
• The CPU fetches an instruction from main memory, the control unit decodes it and the instruction is executed, and this is repeated in the fetch-decode-execute cycle.
• The program is stored as a set of binary instructions, so a different program can be run on the college's new computers by loading different instructions into RAM rather than by changing any hardware.
• Instructions are usually carried out one at a time, in the order in which they are stored, which is suitable for the computers in the IT suite that each run one piece of software at a time.

Main memory (RAM)

• Main memory (RAM) holds the instructions and the data that the CPU is currently using.
• RAM is directly accessible by the CPU, so the required instruction or item of data can be fetched quickly during the fetch stage of the cycle.
• RAM can be read from and written to while a program is running, so the results produced by the students' work can be stored back into memory.
• RAM is volatile, so its contents are lost when the power is turned off, and the college's computers will have empty RAM each time they are started.

CPU components

• The control unit decodes each instruction and coordinates the timing and control of the other parts of the CPU, so it directs the fetch-decode-execute cycle.
• The arithmetic logic unit (ALU) carries out arithmetic operations and logical comparisons on the data, for example working out a student's total mark in a spreadsheet.
• Registers are small, fast storage locations inside the CPU that hold the address of the next instruction, the instruction being decoded and the data being worked on.
• The clock sends a regular signal that synchronises the actions of the CPU, so each step of the cycle is carried out in time with the clock.

Buses

• The address bus is one way, from the CPU to main memory, and carries the address of the memory location that the CPU wants to read from or write to.
• The data bus carries the instruction or the data between the CPU and main memory, so it is used to bring an instruction to the CPU in the fetch stage.
• The control bus carries control signals such as read and write, so the CPU can tell main memory whether it is reading an instruction or writing data.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover the role of main memory (RAM) and the role of the CPU components or the buses during the fetch-decode-execute cycle, as well as the stored program concept.
• Do not accept RAM described as being inside the CPU, or as non-volatile, or any point about how clock speed affects performance, because the question excludes it.