Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 6 marks

Pick again
Print
1Multiple choice1 markSecondary Memory Swap Remove

A computer has both primary and secondary storage.

Identify the role of secondary storage.

[1 mark]
  • ATo store data and programs permanently
  • BTo store data and instructions currently in use
  • CTo carry out calculations on data
  • DTo allow the CPU to access programs directly
Mark scheme
  • A To store data and programs permanently (1)
  • The only correct answer is A. The correct answer is to store data and programs permanently.
  • B is not correct because storing the data and instructions currently in use is the role of primary storage/RAM, which is volatile, not the role of secondary storage
  • C is not correct because calculations on data are carried out by the CPU, not by secondary storage
  • D is not correct because secondary storage is not directly accessible by the CPU; data must first be copied into RAM
Example answers and how they were marked
Full marks1/1

A To store data and programs permanently

Why: Correct option (1): storing data and programs permanently is the role of secondary storage, which is non-volatile.

No marks0/1

B To store data and instructions currently in use

Why: Near miss scoring 0: this describes primary storage/RAM, which is volatile, and is not the role of secondary storage (line B of the mark scheme). Only A is credited.

No marks0/1

D To allow the CPU to access programs directly

Why: Misconception scoring 0: candidates think the CPU reads programs straight from secondary storage, but secondary storage is not directly accessible by the CPU (line D).

2Multiple choice1 markStored Program Computers Swap Remove

Identify the component of the CPU that carries out arithmetic and logical operations.

[1 mark]
  • AArithmetic logic unit
  • BControl unit
  • CMain memory
  • DRegister
Mark scheme
  • A Arithmetic logic unit (1)
  • The only correct answer is A. The correct answer is arithmetic logic unit.
  • B is not correct because the control unit decodes instructions and controls the CPU
  • C is not correct because main memory is not part of the CPU and stores data and instructions
  • D is not correct because a register stores small amounts of data within the CPU
Example answers and how they were marked
Full marks1/1

A Arithmetic logic unit

Why: Correct option: the arithmetic logic unit carries out arithmetic and logical operations (1).

No marks0/1

B Control unit

Why: Control unit is a CPU component but its role is to decode and control, not perform arithmetic or logical operations, so no mark.

No marks0/1

D Register

Why: Register stores data but does not carry out operations; a common misconception that any CPU component performs calculations, so no mark.

3Describe2 marksEmbedded Systems Swap Remove

A greenhouse uses an embedded system to control the growing conditions for plants.

Describe how the embedded system controls the growing conditions in the greenhouse.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It reads/monitors the temperature/humidity/light level using sensors (1) to switch the heaters/vents/lamps/watering system on or off when the reading is outside the set range (1)
  • It compares the readings from the sensors with the set values/thresholds stored in its memory (1) to decide whether the conditions need to be changed (1)
  • It monitors the light level using a light sensor (1) and turns the lamps on when the light falls below the level the plants need (1)
  • It monitors the soil moisture using a soil moisture sensor (1) and turns the water pump/irrigation on when the soil is too dry (1)

For the second mark, the action/response must be linked to the sensor reading given in the first point.

Allow named sensors (temperature/humidity/light/soil moisture) and named outputs (heater, fan, vent/window, lamp, irrigation/water pump).

Do not accept answers that only name a sensor or only name an output, e.g. 'it has a temperature sensor and a heater', as there is no link between the reading and the control action.

Do not accept answers where a person switches the equipment on or off, as the embedded system controls the conditions automatically.

Example answers and how they were marked
Full marks2/2

The embedded system reads the temperature using a sensor and switches the heater on when the temperature is below the set value.

Why: Sensor reading point (1) and linked control action (1).

Some marks1/2

The embedded system compares the readings from the sensors with the set values stored in its memory.

Why: First point only (1) - the comparison with stored values - with no linked action.

No marks0/2

The greenhouse has a temperature sensor and a heater.

Why: Only names a sensor and an output, which the mark scheme says is not accepted.

4Describe2 marksEmbedded Systems Swap Remove

Many modern devices contain embedded systems.

Describe what is meant by the term embedded system.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It is a computer/processor built into a larger device (1) to carry out a single dedicated task/function (1)
  • It is a combination of a processor, memory and input/output in one unit (1) that controls the device it is part of (1)
  • It is a computer that forms part of another device (1) so it is not used as a general purpose computer (1)

Allow 'forms part of another device' or 'inside another device' for the first mark.

Do not award the second mark for a separate fact that is not linked to the first point, e.g. 'It is built into a device and it uses little power' would earn only the first mark (1).

Do not accept 'a small computer' on its own, with no reference to being part of another device or performing a dedicated task.

Do not accept 'a computer that controls a device' on its own, with no reference to it being built into/part of a larger device or carrying out a dedicated task.

Do not accept 'it performs a single dedicated task' on its own, with no reference to it being built into/part of a larger device.

Do not accept descriptions of a general purpose computer, e.g. 'it can run many different programs' or 'new software can be installed'.

Do not accept 'it is a system that is embedded in another system' as this repeats the term in the question.

Example answers and how they were marked
Full marks2/2

An embedded system is a computer built into a larger device to carry out one specific/dedicated task

Why: Linked point (1) that it is built into a larger device, developed (1) with the dedicated task it performs.

Some marks1/2

It is a small computer that is inside another device.

Why: First point only (1) - inside/part of another device - with no linked development of a dedicated task.

No marks0/2

It is a computer that controls a device.

Why: Near-miss: only says it controls a device, with no reference to being built into/part of a larger device or a dedicated task, so no marks.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.