Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 14 marks

Pick again
Print
1Multiple choice1 markSecondary Memory Swap Remove

A computer has both primary and secondary storage.

Identify the role of secondary storage.

[1 mark]
  • ATo store data and programs permanently
  • BTo store data and instructions currently in use
  • CTo carry out calculations on data
  • DTo allow the CPU to access programs directly
Mark scheme
  • A To store data and programs permanently (1)
  • The only correct answer is A. The correct answer is to store data and programs permanently.
  • B is not correct because storing the data and instructions currently in use is the role of primary storage/RAM, which is volatile, not the role of secondary storage
  • C is not correct because calculations on data are carried out by the CPU, not by secondary storage
  • D is not correct because secondary storage is not directly accessible by the CPU; data must first be copied into RAM
Example answers and how they were marked
Full marks1/1

A To store data and programs permanently

Why: Correct option (1): storing data and programs permanently is the role of secondary storage, which is non-volatile.

No marks0/1

B To store data and instructions currently in use

Why: Near miss scoring 0: this describes primary storage/RAM, which is volatile, and is not the role of secondary storage (line B of the mark scheme). Only A is credited.

No marks0/1

D To allow the CPU to access programs directly

Why: Misconception scoring 0: candidates think the CPU reads programs straight from secondary storage, but secondary storage is not directly accessible by the CPU (line D).

2Short recall1 markPrimary Memory Swap Remove

Computers use RAM to store the data and instructions that are in use.

Name the term used to describe memory that loses its contents when the power is switched off.

[1 mark]
Mark scheme

Award one mark for:

  • Volatile (1)

Allow volatile memory / it is volatile.

Do not accept non-volatile, ROM, RAM or temporary/short term memory on their own, as these are not the term asked for.

Example answers and how they were marked
Full marks1/1

Volatile

Why: Correct term for memory that loses its contents when the power is switched off (1).

No marks0/1

Temporary memory

Why: Describes what such memory does but is not the term asked for; 'temporary memory' is on the Do not accept line, so no mark.

No marks0/1

Non-volatile

Why: Non-volatile memory keeps its contents when the power is switched off, the opposite of what the question describes; it is explicitly not accepted.

3Discuss6 marksPrimary Memory Swap Remove

A video production company edits films for its clients. The editors use computers to work on 4K video, and they say the computers have become slow. One editor wants to replace the CPU, but a colleague thinks adding more RAM would be better.

Discuss whether adding more RAM will improve the performance of the computers used to edit 4K video. (6)

Your answer should include:

  • how RAM is used when editing video
  • why too little RAM causes poor performance
  • why adding more RAM may not always improve performance.
[6 marks]
Mark scheme

Indicative content

How RAM is used when editing video

  • The editing software and the video project being worked on are loaded into RAM so that the CPU can access them quickly.
  • RAM holds the frames, effects and timeline data that the CPU is processing as part of the fetch-decode-execute cycle.
  • The CPU fetches the instructions and the video data it needs from RAM, which is much faster than fetching them from secondary storage.
  • Having more RAM means that more of the 4K video project and its effects can be held in memory at the same time.
  • RAM is also used by the operating system and any other open software, so not all of the RAM is available to the editing software.

Why too little RAM causes poor performance

  • If there is not enough RAM, the operating system uses virtual memory on secondary storage for data that will not fit in RAM.
  • Virtual memory is much slower than RAM, so the editor waits longer for 4K video to load and for effects to be applied.
  • Data has to be swapped between RAM and virtual memory, which is extra work that slows the computer down.
  • The editing software may freeze or close if it runs out of memory while working on the 4K video.
  • Playback of the 4K video is not smooth because the frames cannot all be held in RAM ready for the CPU.

Why adding more RAM may not always improve performance

  • If the computer already has enough RAM for the editing software, the extra RAM will not be used and performance will hardly change.
  • The clock speed and the number of cores of the CPU decide how quickly instructions are processed, so a slow CPU will still limit how quickly the video is edited.
  • A slow secondary storage drive will still limit how quickly the 4K video files can be loaded into RAM.
  • Adding RAM only improves performance if a shortage of RAM was the reason for the computer being slow.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must explain how RAM is used when editing video and give a developed reason why adding more RAM may not always improve performance; responses that only explain how RAM is used, or only why too little RAM causes poor performance, are limited to Level 2.
  • Accept 'paging' or 'swap file' as equivalent to virtual memory, but do not accept 'cache' or 'ROM'; do not credit statements that adding RAM increases the CPU clock speed or makes the CPU faster, or that 'RAM is volatile' explains poor performance, as these are not linked to the question asked.
Example answers and how they were marked
Full marks6/6

RAM holds the editing software and the 4K video project that is being worked on, so the CPU can fetch the frames and the effects it needs much faster than from the hard drive. If there is not enough RAM, the operating system has to use virtual memory on secondary storage instead, and this is much slower than RAM, so the editors have to wait for video to load and the playback is not smooth. Adding more RAM can help because more of the 4K project and its effects can be held in memory at once. However, it will not always improve performance. If the computer already has enough RAM the extra memory will not be used, and if the CPU has a low clock speed or too few cores it will still take longer to process each frame. A slow hard drive will also limit how quickly the 4K files can be loaded into RAM, so adding RAM only solves the problem if the computer was short of memory.

Why: Level 3: explains how RAM is used when editing video and applies it to the frames and effects (AO1/AO2), gives a developed reason for poor performance using virtual memory and its slowness, and gives developed reasons why extra RAM may not help, namely a CPU bottleneck (clock speed and cores) and a slow drive, applied to the company's 4K editing.

Some marks2/6

RAM is used to store the video while it is being edited. If you don't have enough RAM, the computer will be slow because it has to use the hard drive instead. Adding more RAM will make the computer faster because it can store more video. The CPU also matters because it does the processing.

Why: Level 1, top end (2 marks). A basic relevant use of RAM, storing the video being edited, and a basic point that the hard drive is used when RAM is short; the extra RAM point is asserted with no reasoning and the single CPU statement is not linked to why adding RAM may not help, so there is little development and the answer does not reach Level 2.

No marks0/6

RAM is the same as the CPU, so adding more RAM makes the CPU faster. The video editor should add more RAM to increase the clock speed. 4K video is slow because RAM is volatile.

Why: No creditworthy content: treating RAM as the CPU and saying adding RAM increases the clock speed are the misconceptions named in the guidance, and 'RAM is volatile' is not linked to performance, so it earns nothing.

4Discuss6 marksStored Program Computers Swap Remove

A college is buying new computers for its computer science classroom. A technician explains that the CPU uses three buses to communicate with main memory and other components.

Discuss the role of the address bus, the data bus and the control bus in the fetch-decode-execute cycle.

Your answer should include:

  • what each bus carries
  • the direction in which each bus carries it
  • the role of the buses in the fetch-decode-execute cycle.
[6 marks]
Mark scheme

Indicative content

What each bus carries

  • The address bus carries the address of a memory location that the CPU wants to read from or write to.
  • The data bus carries data and instructions between the CPU and main memory, and between the CPU and other components such as the input and output controllers.
  • The control bus carries control signals, such as read and write, that coordinate the activities of the computer.
  • The clock is a separate component that sends regular pulses, and the control bus carries the signals that keep the other components in time with those pulses.

Direction

  • The address bus is one-way, carrying addresses from the CPU to main memory.
  • The data bus is two-way, so data and instructions can travel both to and from the CPU.
  • The control bus carries control signals from the control unit to the other components, and it is not the clock signal itself.
  • The number of bits in the address bus determines how many memory locations can be addressed, and the number of bits in the data bus determines how much can be transferred at one time.

The role of the buses in the fetch-decode-execute cycle

  • Fetch: the address of the next instruction, held in a register in the CPU, is placed on the address bus so that main memory knows which location to read.
  • Fetch: the control unit sends a read signal on the control bus to main memory.
  • Fetch: the instruction held in that location is returned to the CPU on the data bus.
  • Decode: the control unit decodes the instruction and sends control signals on the control bus to set up the other components, for example telling the ALU which operation to carry out.
  • Execute: the address of any data needed is placed on the address bus, a read or write signal is sent on the control bus, and the data itself travels between the CPU and main memory on the data bus.
  • The cycle repeats, with each step taking place in time with a pulse from the clock.

Level 3 responses must cover all three buses and link them to the fetch-decode-execute cycle, including the fetch stage and at least one of the decode and execute stages. Answers that describe each bus correctly but link none of them to a stage of the cycle are limited to Level 1.

Do not accept 'the address bus carries data', 'the data bus carries addresses', 'the data bus carries instructions only during the fetch stage', 'the control bus carries the clock signal' or 'the control bus is the clock'; the clock is a separate component whose pulses the control signals coordinate with.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)
Example answers and how they were marked
Full marks6/6

At the start of the fetch stage the address of the next instruction, which is held in a register, is placed on the address bus, which is one-way, so that main memory knows which location to read. The control unit sends a read signal on the control bus, and the instruction held at that address is returned to the CPU on the data bus, which is two-way. In the decode stage the control unit works out what the instruction means and sends control signals on the control bus to set up the other components, for example telling the ALU which operation to carry out. In the execute stage, if the instruction needs data from memory, the address of that data is placed on the address bus, a read or write signal is sent on the control bus and the data itself travels on the data bus. Every step happens on a pulse from the clock, which is a separate component, and the control bus carries the signals that keep the components in time with it. The widths of the buses matter too: more address bits mean more memory locations can be addressed and more data bits mean more can be moved at once.

Why: Level 3 (6 marks): all three buses are covered, with what each carries and its direction, and each is linked to the fetch, decode and execute stages, plus the role of the clock and the effect of bus widths.

Some marks2/6

The address bus carries addresses from the CPU to the memory and it is one-way. The data bus carries data and it is two-way. The control bus carries control signals. During the fetch stage the CPU fetches the instruction from memory using these buses.

Why: Level 1 (2 marks): each bus is named with a basic correct statement (address bus carries addresses one-way, data bus is two-way, control bus carries control signals), but no bus is linked to a stage of the cycle, so the guidance line limits this to Level 1; the general mention of the fetch stage is not tied to any bus.

No marks0/6

The address bus carries the data to the CPU. The data bus carries the addresses to the memory. The control bus is the clock that makes the CPU run faster.

Why: Level 0 (0 marks): the address bus and data bus roles are swapped, which the scheme says not to accept, and the control bus is wrongly described as the clock, which is also not accepted, so there is no rewardable content.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.