Edexcel GCSE Computer Science (1CP2) Exam Questions

Award one mark for any of the following up to a maximum of two marks:

• Walls/obstacles between the device and the access point (1)
• Interference from other electrical devices/other devices/other wireless networks (1)
• Distance from the access point (1)
• Using a higher frequency band (e.g. 5GHz) (1)
• Low transmit power of the access point/device (1)

Allow thick walls/furniture for walls/obstacles

Do not accept using more bandwidth

Do not accept a weaker signal without a stated cause

Award up to two marks for a linked description such as:

• The bandwidth/capacity of the access point is shared between all the connected devices (1) so each device gets less bandwidth as more devices connect, which reduces the speed of data transfer (1)
• The devices have to take turns to transmit (contention) (1) so each device waits longer before it can send data, which increases latency (1)
• The access point can only support a maximum number of connections (1) so once this limit is reached, further devices cannot connect to the network (1)

Allow 'contention' as an alternative to devices having to take turns to transmit.

Allow 'the network becomes slower' as the second mark only where it is linked to shared bandwidth, to devices taking turns to transmit or to the maximum number of connections.

Do not accept a response that only states the network becomes slower, or that there are more devices/more traffic, without saying how this affects performance.

Do not accept responses about range or interference unless they are linked to the number of connected devices.

Award up to two marks for a linked description such as:

• Data travels along the cable directly to the switch on a single continuous path (1) so the time between sending and receiving the data is short (1)
• A cable is not affected by interference from other devices/wireless traffic nearby (1) so packets are not lost and resent, which would add to the delay (1)
• The switch sends the data only to the port of the correct device, not to every device (1) so the data spends less time travelling and the delay is lower (1)
• Fewer devices share a cable than share a wireless channel (1) so packets do not queue/wait before they are sent (1)

The first mark is for the way the wired connection carries the data; the second mark is for how this reduces the delay between sending and receiving.

Do not accept responses about bandwidth or the amount of data a cable can carry, as latency is the delay between sending and receiving.

Do not accept responses that confuse latency with speed/bandwidth, e.g. 'a wired connection is faster so there is less latency', unless they describe how the delay is reduced.

Do not accept answers that only say a wired connection is faster, with no link to the delay.