Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 6 marks

Pick again
Print
1Short recall2 marksWireless Connections Swap Remove

Wireless networks have a limited range.

State two factors that can reduce the range of a wireless network.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Walls/obstacles between the device and the access point (1)
  • Interference from other electrical devices/other devices/other wireless networks (1)
  • Distance from the access point (1)
  • Using a higher frequency band (e.g. 5GHz) (1)
  • Low transmit power of the access point/device (1)

Allow thick walls/furniture for walls/obstacles

Do not accept using more bandwidth

Do not accept a weaker signal without a stated cause

Example answers and how they were marked
Full marks2/2

Walls can block the signal, and moving further from the access point reduces the range.

Why: Gives walls as an obstacle (1) and distance from the access point (1).

Some marks1/2

Interference from other devices.

Why: Gives one valid factor, interference from other devices (1), but no second factor.

No marks0/2

Using more bandwidth reduces the range.

Why: Bandwidth does not reduce range; this is a near-miss listed as Do not accept, so no mark.

2Describe2 marksWired Connections Swap Remove

A hospital connects the computers on a ward using wired connections.

Describe how using wired connections can reduce latency on this network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Data travels along the cable directly to the switch on a single continuous path (1) so the time between sending and receiving the data is short (1)
  • A cable is not affected by interference from other devices/wireless traffic nearby (1) so packets are not lost and resent, which would add to the delay (1)
  • The switch sends the data only to the port of the correct device, not to every device (1) so the data spends less time travelling and the delay is lower (1)
  • Fewer devices share a cable than share a wireless channel (1) so packets do not queue/wait before they are sent (1)

The first mark is for the way the wired connection carries the data; the second mark is for how this reduces the delay between sending and receiving.

Do not accept responses about bandwidth or the amount of data a cable can carry, as latency is the delay between sending and receiving.

Do not accept responses that confuse latency with speed/bandwidth, e.g. 'a wired connection is faster so there is less latency', unless they describe how the delay is reduced.

Do not accept answers that only say a wired connection is faster, with no link to the delay.

Example answers and how they were marked
Full marks2/2

The cable is not affected by interference from other devices so packets do not need to be resent and the delay stays low.

Why: First mark for the cable being free of interference (1); linked development that no packets are resent and so the delay is lower (1).

Some marks1/2

There is no interference from other devices on a cable.

Why: Gives the first point of a linked pair (1) but does not say how this reduces the delay between sending and receiving.

No marks0/2

Wired connections have a higher bandwidth so there is less latency.

Why: Confuses bandwidth with latency, which the 'Do not accept' lines rule out (0).

3Explain2 marksPacket Switching Swap Remove

A file is sent across the internet in packets.

Explain why packets from the same file may take different routes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each router chooses the best route at the time (1) so when a route becomes busy/congested or fails, later packets are forwarded along a different path (1)
  • Routers forward each packet separately (1) so the path a packet takes depends on the traffic conditions when that packet arrives (1)
  • A router may send a packet to a different next router (1) if its routing table shows a better/less congested route for that packet (1)
  • Traffic on the internet changes (1) so no single path is kept for the file and each packet can use whichever route is best when it is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow reference to a routing table, or to how a router decides the route, as part of the linked reason.

Do not accept 'the packets have different IP addresses' because all packets from the same file have the same destination IP address, even though their routes can differ.

Do not accept 'the internet is busy' or 'there is a lot of traffic' on its own without linking this to the router choosing a different route.

Do not accept 'different routers send the packets' on its own without a reason why a different router/route is chosen.

Do not accept an answer that only says the packets take different routes without explaining why.

Example answers and how they were marked
Full marks2/2

Each router chooses the best route at the time, so if one route becomes busy or fails, later packets are sent a different way.

Why: Linked point (1) that each router chooses the best route at the time and reason (1) that a busy or failed route means later packets take a different path.

Some marks1/2

Routers send packets along the least congested route.

Why: States that a router chooses the least congested route (1) but gives no linked reason why this makes the packets from the file take different routes.

No marks0/2

Because each packet is given a different IP address so they go to different places.

Why: Misconception named in the mark scheme: all packets from the same file share the same destination IP address, even though their routes can differ.

Questions by topic

5.3 Cybersecurity

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.